• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.3
• /
• pp.347-353
• /
• 2012

Design and analysis of a novel 2-phase 4/5 Switched Reluctance Motor(SRM) is presented. The proposed motor employs a novel stator pole configuration. A novel SRM employs four-rotor and five-stator poles. The motor has no dead-zone and can be operate at any rotor position. The structure and operating principle are also described. The comparison between the proposed motor and a conventional two-phase 4/2 SRM is undertaken in this analysis. Furthermore, the Finite Element Analysis(FEA) and matlab-simulink are used to predict and simulate the performance of a proposed motor. The results of investigation indicate that the proposed structure offers a better performance in term of torque production.

• Journal of Power Electronics
• /
• v.6 no.2
• /
• pp.163-171
• /
• 2006

In this paper, a Switched Reluctance Motor (SRM) employed in an electric vehicle (EV) is designed using the finite element method (FEM). The static torque of the SRM is estimated through magnetic field analysis. The SRM temperature rise over operation time is estimated through heat transfer analysis. First, static torque and temperature rise over the time of 600W SRM is included in the experiment set, and are compared with the calculated results using the FEM under the same conditions. The validity of the magnetic field analysis and heat transfer analysis is verified by the comparisons. In addition, a 60 [kW] SRM employed in an EV, whose output characteristics are equal to a 1500 [cc] gasoline engine, is designed under magnetic field analysis and heat transfer analysis.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.3
• /
• pp.141-146
• /
• 2020

In brushless DC motors (BLDC), the on/off angle of the switch is determined by the optimal alignment of the stator and rotor, while switched reluctance motors (SRM) are complex parameters with many on/off angles of the switch. It appears as a function and therefore the switching angle is variable for optimal operation. Therefore, in order to operate the switched reluctance motor (SRM) optimally, the rotor position can be detected using a high resolution position sensor and a complicated additional circuit. In this paper, rotor position detection and related position detection circuits are applied and detected by using various sensors such as encoder, hall sensor and opto interrupter among several methods to drive switched reluctance motor (SRM). Also a study on securing the initial position of the rotor was conducted.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1026-1029
• /
• 1993

Inherent speed-torque performance of Switched Reluctance Motor is similar to that of series wound DC motor. Thus, the speed of the motor is extremely regulated according to load torque. For the purpose of controlling the speed and torque of SRM it is necessary to change the applied DC link voltage or the switch-ON and switch-OFF angles which control the phase current of the motor. This paper describes speed-torque characteristics of an integral horse power Switched Reluctance Motor by adjusting the switch-ON and switch-OFF angles. Speed at rated load torque can be regulated by adjusting the switching angles and the control scheme is applied to 2kW, 3 phase, 6/4 SRM.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.4
• /
• pp.1548-1555
• /
• 2017

This paper attempts to employ and investigate neural based approaches as interpolation tools for modeling of Switched Reluctance Motor (SRM) drive. Precise modeling of SRM is essential to analyse the performance of control strategies for variable speed drive application. In this work the suitability of Generalized Regression Neural Network (GRNN) and Extreme Learning Machine (ELM) in addition to conventional neural network are explored for improving the modeling accuracy of SRM. The neural structures are trained with the data obtained by modeling of SRM using Finite Element Analysis (FEA) and the trained neural network is incorporated in the model of SRM drive. The results signify the modeling accuracy with GRNN model. The closed loop drive simulation is performed in MATLAB/Simulink environment and the closeness of the results in comparison with the experimental prototype validates the modeling approach.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.136-142
• /
• 2014

A major problem in Switched Reluctance Motor (SRM) is torque ripple, which causes undesirable acoustic noise and vibration. This work focuses on reducing the undesirable torque ripple in SRM by modifying stator and rotor geometry. This paper presents a comparative study on torque ripple minimization in SRM with modified pole shapes such as stator pole taper, stator pole face with non-uniform air gap and pole shoe attached to rotor pole. Further this paper presents a detailed sensitivity analysis of the effect of different geometrical parameters that alter the pole face shapes on the performance of SRM. The analysis is performed using finite-element method considering average torque and torque ripple as performance parameters. Based on the analysis, a design combining stator pole taper with non-uniform air gap is proposed to improve the torque characteristics of SRM. The dynamic characteristics of the proposed design are simulated and the results show satisfactory reduction in torque ripple.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.10
• /
• pp.37-42
• /
• 2014

This paper discusses study of sensorless control of a variable speed switched reluctance motor (SRM) for electric AC compressors on electrical vehicles. A typical SRM drive requires a position sensor such as an encoder or hall sensor to measure the angular rotor position. However, harsh environment in electrical AC compressors for electric vehicles makes it difficult to use the position sensor in their motor drive system. Therefore, a sensorless control scheme for electric compressor motors utilizing magnetic characteristics of SRM with respect to position angle and phase current is proposed. The overall variable speed SRM drive with position sensorless control scheme has been modeled using Matlab/Simulink software and closed loop current control simulation is presented to validate the proposed sensorless drive control.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1866-1872
• /
• 2017

This paper presents the design of in-wheel type Switched Reluctance Motor (SRM) which can be used as both traction motor and power pickup device in a wireless charging system of electric vehicles. The SRM acts as a traction drive in driving mode and a power receiver in charging mode to avoid any additional weights. Double stator axial field SRM is used due to its structure that can be mounted inside the wheel. The charging circuit is integrated with the asymmetric converter and phase windings of SRM, reducing the cost and size of the system. Magnetic resonance is implemented to increase the efficiency. Simulations done in Maxwell and Simplorer verify the effectiveness of the proposed system.

• Journal of Power Electronics
• /
• v.19 no.2
• /
• pp.540-548
• /
• 2019

In this work a new configuration of E-core stator Switched Reluctance Motor (SRM) with permanent magnets and auxiliary windings embedded in the stator yoke is proposed. For the proposed configuration of SRM electromagnetic analysis is performed using Finite Element Analysis (FEA) based computer aided design package MagNet and to emphasize its merits a comparison is drawn with existing hybrid excitation configuration of SRM. In addition, the vibration characteristics of the motor are analyzed by performing modal and transient analysis using the ANSYS package. Results of the analysis reveals that the proposed configuration of SRM exhibits better electromagnetic and vibration characteristics and is capable of competing with the existing topologies in the variable speed market.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.3
• /
• pp.235-240
• /
• 2014

A novel segment type switched reluctance motor (SRM) as a rare-earth-less motor is proposed. The torque was increased by 40% and the radial force was decreased by 76% compared with the same size usual variable reluctance (VR) type SRM. Increasing the average torque, however, caused increasing torque ripple. In this paper we develop a 4-phase segment type SRM and show that the torque ripple can be decreased well.