• 전력전자학회논문지
• /
• 제5권4호
• /
• pp.343-351
• /
• 2000

본 논문에서는 정렬과 비정렬된 회전자 위치들에서 자화곡선들을 기본으로 한 SRM의 회전자 워치펑가 알고리즘을 제안한다. 자화곡선은 측정된 상 전압과 상 전류로부터 계산되어지고, 계산된 데이타는 회전자 위치검출을 위한 자화곡선의 입력으로 사용되어진다. 자화곡선은 비션형 특성해석에 적합한 퍼지 알고리즘으로 구생되어졌다. 종래의 지삭기반 퍼지제어기를 이용한 자속관측기가 SRM의 센서리스 제어를 얻기 위해 제시되었다. 최적 각을 선정하기 위한 방식이 회전자 위치검출을 위해 제시되었다. 제안된 알고리즘의 강인성이 시뮬레이션과 실험결과의 비교를 통해 입증되었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.235-238
• /
• 2004

The simple motor construction and low cost, fault tolerant power electronic drive has made the switched reluctance drive a strong contender for many applications. But the switched reluctance drive does exhibit higher levels of vibration and acoustic noise than that of most competing drives. The main source of vibration in the switched reluctance drive is generated by rapid change of radial force when phase current is extinguished during commutation action. In this paper, a hybrid excitation method is proposed to reduce vibration and acoustic noise of the switched reluctance drive. The hybrid excitation has 2-phase excitation by long dwell angle as well as conventional 1-phase excitation. The vibration and acoustic noise are reduced because the scheme reduces abrupt change of excitation level by distributed and balanced excitation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.887-888
• /
• 2006

Switched Reluctance Motor(SRM) is rotated by reluctance force generated between rotor pole and stator pole. So SRM must be switched by exciting current according to rotor position. but SRM takes the advantages of high speed driving and very simple structure. The single phase SRM can not be start by itself and torque ripple is generated more than multi-phase SRM. But mechanical structure and driver is simpler than multi-phase SRM. The single phase SRM driver is composed with the absolute encoder and DSP to control exciting section and current, and is supplied by constant voltage. So The paper is intend to measure the speed charactrer of double silent pole type SRM by using the unipolar driving curcuit.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권3호
• /
• pp.114-121
• /
• 2004

Switched reluctance motors have received much attention as a driving means for various industrial applications because they have simple construction, low cost and high efficiency. Nevertheless, the requirements of drive converters make it difficult to lower the overall system cost as compared with the DC motor application. Single phase switched reluctance motors (SPSRMs) provide a solution to the high cost problem since the number of switching power devices can be reduced and consequently the trials for application are increased. However, research involving SPSRMs, especially in the area of design work, is insufficient. This paper introduces a novel design methodology of single phase SRM. The design work for SPSRM comprises the determination of many variables such as stator and rotor pole arc as well as on, off and so on. Managing all variable combinations leads to lengthy computation time and a fault in the design process. For that reason, a reliable technique and brief procedure term are required in SPSRM design.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1578-1585
• /
• 2018

This work investigates two different motor drive technologies, switched reluctance motor (SRM) and induction motor (IM). They are designed optimally to meet the desired performances for electric scooters. The comparison of both motors is described in terms of performances and material cost. With the similar constraint, induction motor performs slightly better than switched reluctance motor. But this must be traded-off with higher weight and cost. Both drive systems are, however, suitable for electric scooter application. Finally, the range simulations are conducted on a European urban driving cycle, ECE15 driving cycle and a more realistic cycle, Bangkok driving cycle. The e-scooter ranges are varied from 36 to 109 km depending on driving cycle, motor technology and number of passengers.

• 전력전자학회논문지
• /
• 제22권3호
• /
• pp.193-198
• /
• 2017

This paper discusses the design and control of a switched reluctance motor (SRM) drive system for a built-in car vacuum cleaner. The growing popularity of outdoor activities and recreation has led the automobile industry to expand technologies that increase the convenience of vehicles, and thus, a built-in car vacuum cleaner was introduced. However, the existing DC motor of a vacuum cleaning system has several disadvantages, such as maintenance cost and lifespan issues of its commutator-brush structure. An SRM can be a good alternative to the existing DC motor because of its high-speed capability, long lifespan, low maintenance cost, and high efficiency, among other advantages. A prototype SRM drive is designed and manufactured to verify its feasibility for use in a built-in car vacuum cleaning system. Dynamic simulation is conducted to determine the optimal switching angle for maximum efficiency and minimum torque ripple. Load test, noise measurement, and suction-power tests are also carried out.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.370-376
• /
• 1993

In this paper, we present the voltage source algorithm for high speed and low torque ripple operation of a switched reluctance motor (SRM). The SRM has simpler structure than the traditional dc or ac motor. It has a high starting torque and can be operated in the wide range of speed. So it can be applied to various areas. But the SRM has some difficulties in driving circuit and controller due to the large inductance variations. In this study, in order to produce the low torque ripple and the high speed operation, a voltage source algorithm is proposed. We showed the good performance of the proposed controller through simulation and experiment.

• 전력전자학회논문지
• /
• 제11권4호
• /
• pp.378-384
• /
• 2006

본 논문에서는 견인 구동을 위한 스위치 릴럭턴스 전동기의 설계와 특성해석을 수행하였다. 이를 위하여 기계적 전기적으로 유효한 범위에서 각 파라미터의 값을 변경하면서 시뮬레이션 성능의 특성변화를 파악하였고 우수한 성능을 가지는 범위를 제시하였다. 제시된 범위를 바탕으로 설계파라미터를 조합하여 시작기를 설계하고 그 성능을 시뮬레이션 하였으며 시작기를 제작하여 실험하였다.

• 전기학회논문지
• /
• 제61권1호
• /
• pp.34-40
• /
• 2012

Flux linkage of phase windings or phase inductance is an important parameter in determining the behavior of a switched reluctance motor (SRM) [1-8]. Therefore, the accurate prediction of inductance at aligned and unaligned rotor positions makes a significant contribution to the design of an SRM and its analytical approach is not straightforward due to nonlinear flux distribution. Although several different approaches using a finite element analysis (FEA) or curve-fitting tool have been employed to compute phase inductance [2-5], they are not suitable for a simple design procedure because the FEA necessitates a large amount of time in both modeling and solving with complexity for every motor design, and the curve-fitting requires the data of flux linkage from either an experimental test or an FEA simulation. In this paper, phase inductance at aligned and unaligned rotor positions is estimated by means of numerical method and magnetic equivalent circuit as well, and the proposed approach is analytically verified in terms of the accuracy of estimated inductance compared to inductance computed by an FEA simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.219-221
• /
• 1996

A reluctance motor is a electric machine in which torque is produced by the tendency of its movable part to move to a position where the inductance of the excited winding is maximized. This means physical fact that the energy stored in the field tend to be minimized as the energy stored in the field is converted the mechanical work. In this paper, we have studied the characteristics of the electromagnetic energy conversion about SRM which have 6 stator and 4 rotor poles with 3 phase. In addition we design the fundamental model of SRM with requirements(e.g. power, speed) and simulate with PC-SRD.