• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.137-140
• /
• 1998

A new SPWM inverter using three-phase boost converter by auxiliary partial resonant with high power factor and high efficiency is proposed. The proposed boost converter is constructed by using a resonant network in parallel with the switch of the conventional boost converter. The devices are switched at zero voltage or zero current eliminating the switching loss. A new Partial resonant boost converter achieves zero-voltage switching (ZVS) or zero-current switching (ZCS) for all switch devices without increasing their voltage and current stresses. This paper introduces elimination of low-order harmonics compared with conventional SPWM inverter and SPWM inverter using three-phase boost converter by auxiliary Partial resonant.

• Journal of Power Electronics
• /
• 제13권5호
• /
• pp.829-840
• /
• 2013

The modified sinusoidal pulse-width modulation (SPWM) is one of the PWM techniques used in three-phase AC-DC buck converters. The modified SPWM works without the current sensor (the converter is current sensorless), improves production of sinusoidal AC current, enables obtainment of near-unity power factor, and controls output voltage through modulation gain (ranging from 0 to 1). The main problem of the modified SPWM is the huge starting current and voltage (during transient) that results from a large step change from the reference voltage. When the load changes, the output voltage significantly drops (through switching losses and non-ideal converter elements). The single-input single-output (SISO) approach with minor-loop voltage feedback controller presented here overcomes this problem. This approach is created on a theoretical linear model and verified by discrete-model simulation on MATLAB/Simulink. The capability and effectiveness of the SISO approach in compensating start-up current/voltage and in achieving zero steady-state error were tested for transient cases with step-changed load and step-changed reference voltage for linear and non-linear loads. Tests were done to analyze the transient performance against various controller gains. An experiment prototype was also developed for verification.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.939-950
• /
• 2015

A single-stage AC-AC converter has been designed for a wind energy conversion system (WECS) that eliminates multistage operation and DC-link filter elements, thus resolving size, weight, and reliability issues. A simple switching strategy is used to control the switches that changes the variable-frequency AC output of an electrical generator to a constant-frequency supply to feed into a distributed electrical load/grid. In addition, a modified random sinusoidal pulse width modulation (RSPWM) technique has been developed for the designed converter to make the overall system more efficient by increasing generating power capacity and reducing the effects of inter-harmonics and sub-harmonics generated in the WECS. The technique uses carrier and reference waves of variable switching frequency to calculate the firing angles of the switches of the converter so that the three-phase output voltage of the converter is very close to a sine wave with reduced THD. A comparison of the performance of the proposed RSPWM technique with the conventional SPWM demonstrated that the power generated by a turbine in the proposed approximately increased by 5% to 10% and THD reduces by 40% both in voltage and current with respect to conventional SPWM.

• 전기전자학회논문지
• /
• 제23권3호
• /
• pp.1104-1107
• /
• 2019

본 논문에서는 데드 타임을 줄여 전력 효율을 높이기 위해 데드 타임 제어기를 이용한 웨어러블 AMOLED 디스플레이용 DC-DC 부스트 변환기를 제안한다. 또한, 본 변환기에서는 경부하에서 전력 효율을 높이고 출력 전압 리플을 감소시키기 위해 PWM-SPWM (set-time variable pulse width modulation) 듀얼 모드를 이용한다. 제안하는 회로는 $0.18{\mu}m$ BCDMOS 공정을 이용하여 시뮬레이션을 한 결과 1 mA~70 mA의 부하 전류 범위에서 39%~96%의 전력 효율과 2 mV의 리플 전압을 가졌다. 본 회로의 전력 효율은 PWM-SPWM 방식보다 최대 2% 상승하였고, PWM 방식보다 최대 8% 상승하였다.

• Journal of Power Electronics
• /
• 제14권3호
• /
• pp.531-540
• /
• 2014

A novel carrier-based PWM (CBPWM) strategy of a three-level NPC converter is proposed in this paper. The novel strategy can eliminate the low-frequency neutral point (NP) voltage oscillation under the entire modulation index and full power factor. The basic principle of the novel strategy is introduced. The internal modulation wave relationship between the novel CBPWM strategy and traditional SPWM strategy is also studied. All 64 modulation wave solutions of the CBPWM strategy are derived. Furthermore, the proposed CBPWM strategy is compared with traditional SPWM strategy regarding the output phase voltage THD characteristics, DC voltage utilization ratio, and device switching losses. Comparison results show that the proposed strategy does not cause NP voltage oscillation. As a result, no low-frequency harmonics occur on output line-to-line voltage and phase current. The novel strategy also has higher DC voltage utilization ratio (15.47% higher than that of SPWM strategy), whereas it causes larger device switching losses (4/3 times of SPWM strategy). The effectiveness of the proposed modulation strategy is verified by simulation and experiment results.

• 한국산학기술학회논문지
• /
• 제8권6호
• /
• pp.1355-1362
• /
• 2007

본 논문에서는 태양광 발전의 효율을 높이기 위하여 센서와 마이크로프로세서를 이용한 태양광 위치추적 장치를 설계하여 고정 방식의 태양광 발전과 위치 추적 방식의 태양광 발전에 대하여 비교해 보았으며, 태양전지에 대한 특성 해석과 수학적 모델링을 통한 시뮬레이션을 행하여 태양전지 특성 사양과 비교해 보았다. 또한 전력변환 시스템을 Boost 컨버터와 전압형 인버터로 구성하여 각각에 대하여 실험하였으며, Boost 컨버터 제어에서 최대 전력점 추적을 위해 일정전압 제어법을 사용하였다. 인버터의 제어에서는 SPWM(Sinusoidal Pulse Width Modulation) 제어법을 사용하여 실험하여 좋은 결과를 나타내었다.

• 전기전자학회논문지
• /
• 제23권3호
• /
• pp.1061-1067
• /
• 2019

본 논문에서는 PTWS 방식을 이용한 고집적화된 AMOLED용 3-채널 DC-DC 변환기의 설계한다. 양의 전압 $V_{POS}$는 경부하에서 효율을 제고하기 위해 SPWM 듀얼모드와 PTWS 방식을 적용한 부스트 변환기로 설계한다. 음의 전압 $V_{NEG}$는 전력 손실을 줄이기 위해 PSM 방식을 적용한 0.5x 인버팅 차지펌프를 이용해 설계하고, 추가적인 전압 $V_{AVDD}$는 LDO를 이용하여 설계한다. 제안된 DC-DC 변환기는 $0.18{\mu}m$ BCDMOS 공정을 사용하여 시뮬레이션을 한 결과 부하전류 1mA~70mA에서 전력효율 56.9%~90.2%를 가지고, 양의 전압 $V_{POS}$에서 최대 5mV의 출력 리플을 가졌다.

• 한국전자통신학회논문지
• /
• 제16권1호
• /
• pp.45-52
• /
• 2021

3상 PWM 정류기에 대한 공간벡터제어 기반 전압제어방식은 스위칭 구간에 대한 스위칭 패턴을 설계해야하기 때문에 최적한 스위칭 패턴을 설계하는데 많은 노력이 요구된다. 본 연구에서는 3상 6펄스 전압형 PWM 정류기를 위한 D-Q 제어에 기반 한 SPWM 출력전압 제어 알고리즘을 연구하였다. 출력전압제어 알고리즘에서 3상 기준신호들은 공간벡터 표시법에 기반 한 D-Q 변환으로부터 얻어지며 스위칭 패턴 대신에 SPWM 방식을 이용하여 정류기 스위칭 제어 신호들을 생성하도록 하였다. 다음으로, EMTP-RV를 이용하여 D-Q 제어기반 SPWM 방식을 가지는 3상 6펄스 전압형 PWM 정류기를 모델링하였다. 끝으로, EMTP-RV 시뮬레이션을 통해 얻어지는 출력전압파형을 기준 값과 비교, 출력전압이 기준전압을 정확하게 추종함을 확인함으로서 D-Q 제어기반 SPWM 전압제어 알고리즘의 유효성을 확인할 수 있었다.

• Journal of Power Electronics
• /
• 제9권1호
• /
• pp.109-116
• /
• 2009

This paper addresses the output control of a utility-connected double-fed induction machine (DFIM) for wind power generation systems (WPGS). DFIM has a back-to-back converter to control outputs of DFIM driven by the wind turbine for WPGS. To supply commercially the power of WPGS to the grid without any problems related to power quality, the real and reactive powers (PQ) at the stator side of DFIM are strictly controlled at the required level, which in this paper is realized with the Fuzzy PI controller based on the field orientation control. For the Sinusoidal Pulse Width Modulation (SPWM) converter connected to the rotor side of DFIG to maintain the controllability of PQ at the state side of DFIM, the DC voltage of the DC link capacitor is also controlled at a certain level with the conventional Proportion-Integral (PI) controller of the real power. In addition, the power quality at the grid connected to the rotor side of DFIM through the back-to-back converter is maintained in a certain level with a PI controller of the reactive power. The controllers for the PQ at the stator side of DFIM, the DC link voltage of the back-to-back inverter and the reactive power at the grid connected to the rotor side of DFIM are designed and simulated in the PSIM program, of which the result verifies the performance of the proposed controllers.

• 대한전기학회논문지
• /
• 제38권2호
• /
• pp.93-99
• /
• 1989

This paper describes Sinusoidal Wave-Variable Voltage Variable Fequency (SW-VVVF) system for the high efficiency drive of a 3-phase induction motor. SW-VVVF system consists of a 3-phase 24-pulse converter and a SPWM inverter. The converter with additional 2 tap diode circuits in interphase reactor reduces harmonics in input current. The SPWM inverter consists of an improved PLL system and a V/F controller, which reduces harmonics in output current and performs a high efficiency algorithm by maintaining a constant slip frequency and compensating for the velocity variation of the induction motor with the change of load. Therefore, this system reduces harmonics in input and output currents, and also can drive an induction motor with high efficiency in an economical way. We have proved its utility through experiment.