• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.229-234
• /
• 2006

On May 31, 2003. Landsat 7 experienced an anomaly causing the Scan Line Corrector(SLC) to stop functioning normally. The SLC-off causes individual scan lines to alternately overlap and then leave large gaps at the edge of the Image. A many scientists with ongoing experience using ETM+ data evaluated the scientific usability and validity of Landsat 7 products containing the SLC anomaly The best reference scene for gap-filling is the other SLC-on Landsat scene that provide same resolution, few changes, and similar data acquisition. But receiving of Landsat imagery is not stable in Korea. So SPOT image can be another alternative solution because it is a steady-state multispectral satellite image as Landsat image. In this study, we filled the SLC-off gap s of 2, 3, 4 bands using SPOT image by a local regression technique, and assigned the optimum spectral value to gaps of 1, 5, 7 bands based on a spectral adjacency. Through this process, we could restore Landsat SLC-off image and evaluated the accuracy of the results.

• 대한공간정보학회지
• /
• 제14권4호통권38호
• /
• pp.61-70
• /
• 2006

본 논문에서는 SPOT 5호 HRG 스테레오 영상을 이용하여 수치표고모형을 생성하기 위한 사진측량학적 처리과정을 제시하고 수치표고모형 생성을 위한 HRG supermode 영상의 정확도 잠재성을 평가하고자 하였다. 센서모델링을 위하여 광속조정을 행한 후 에피폴라 영상재배열과 영상정합 과정 등을 통하여 수치표면모형을 생성하였다. HRG 영상으로부터 추출된 DEM 성과를 축척 1:5000의 수치지형도로부터 추출된 기준 DEM과 여러 시험구간 상에서 비교하였다. 전체구간 중 5m 미만의 DEM 오차를 나타내는 부분의 비율은 53.8%이었고, 5m를 초과하는 오차부분은 구름, 수역, 건물 등에 의한 영향을 받는 것으로 확인되어 이러한 지역을 제외하고 평가한 정확도는 약 2.5m의 RMSE를 나타내었다. 아울러 추출된 수치표면모형(DSM)을 사용하여 3차원 건물모델과 대상지역 전체의 3차원 가시화 모델을 작성하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.286-288
• /
• 2003

In this paper, we present our implementation of the direct camera model (image to ground) for SPOT5 and use it to assess the geometric accuracy of SPOT5 imagery. Our assessment confirms the location accuracy of SPOT5 imagery (without use of GCPs) is less than 50m. We further introduce a few attitude parameters to refine the camera model with GCPs. The model is applied to two SPOT5 supermode images, one near vertical, incidence angle of 3 degrees, and one far oblique, incidence angle of 27 degrees. The results show that accuracy (rms of check points) of about one pixel (2.5m) can be achieved with about 4 GCPs by using only 3 parameters to correct the yaw, pitch and roll of the satellite.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.357-360
• /
• 2005

Soil loss is widely recognized as a threat to farm livelihoods and ecosystem integrity worldwide. Soil loss prediction models can help address long-range land management planning under natural and agricultural conditions. Even though it is hard to find a model that considers all forms of erosion, some models were developed specifically to aid conservation planners in identifying areas where introducing soil conservation measures will have the most impact on reducing soil loss. Revised Universal Soil Loss Equation (RUSLE) computes the average annual erosion expected on hillslopes by multiplying several factors together: rainfall erosivity (R), soil erodibility (K), slope length and steepness (LS), cover management (C), and support practice (P). The value of these factors is determined from field and laboratory experiments. This study calculated soil erosion using GIS-based RUSLE model in Imha basin and examined soil erosion source area using SPOT 5 high-resolution satellite image and land cover map. As a result of analysis, dry field showed high-density soil erosion area and we could easily investigate source area using satellite image. Also we could examine the suitability of soil erosion area applying field survey method in common areas (dry field & orchard area) that are difficult to confirm soil erosion source area using satellite image.

• Korean Journal of Geomatics
• /
• 제1권1호
• /
• pp.1-5
• /
• 2001

This paper presents an investigation into the operational comparison of SPOT triangulation to build GCP library by analytical plotter and DPW (digital photogrammetric workstation). GCP database derived from current SPOT images can be used to other image sensors of satellite, if any reasons, such as lack of topographic maps or GCPs. But, general formulation of a photogrammetric process for GCP measurement has to take care of the scene interpretation problem. There are two classical methods depending on whether an analytical plotter or DPW is being used. Regardless of the method used, the measurement of GCPs is the weakest point in the automation of photogrammetric orientation procedures. To make an operational comparison, five models of SPOT panchromatic images (level 1A) and negative films (level 1AP) were used. Ten images and film products were used for the five GRS areas. Photogrammetric measurements were carried out in a manual mode on P2 analytical plotter and LH Systems DPW770. We presented an approach for exterior orientation of SPOT images, which was based on the use of approximately eighty national geodetic control points as GCPs which located on the summit of the mountain. Using sixteen well-spaced geodetic control points per model, all segments consistently showed RMS error just below the pixel at the check points in analytical instrument. In the case of DPW, half of the ground controls could not found or distinguished exactly when we displayed the image on the computer monitor. Experiment results showed that the RMS errors with DPW test was fluctuated case by case. And the magnitudes of the errors were reached more than three pixels due to the lack of image interpretation capability. It showed that the geodetic control points is not suitable as the ground control points in DPW for modeling the SPOT image.

• 대한의용생체공학회:의공학회지
• /
• 제28권5호
• /
• pp.601-608
• /
• 2007

2 Dimensional Gel Electrophoresis(2DGE) is an essentialmethodology for analysis on the expression of various proteins. For example, information for the location, mass, expression, size and shape of the proteins obtained by 2DGE can be used for diagnosis, prognosis and biological progress by comparison of patients with the normal persons. Protein spot matching for this purpose is comparative analysis of protein expression pattern for the 2DGE images generated under different conditions. However, visual analysis of protein spots which are more than several hundreds included in a 2DGE image requires long time and heavy effort. Furthermore, geometrical distortion makes the spot matching for the same protein harder. In this paper, an iterative algorithm is introduced for more efficient spot matching. Proposed method is first performing global matching step, which reduces the geometrical difference between the landmarks and the spot to be matched. Thus, movement for a spot is defined by a weighted sum of the movement of the landmark spots. Weight for the summation is defined by the inverse of the distance from the spots to the landmarks. This movement is iteratively performed until the total sum of the difference between the corresponding landmarks is larger than a pre-selected value. Due to local distortion generally occurred in 2DGE images, there are many regions in whichmany spot pairs are miss-matched. In the second stage, the same spot matching algorithm is applied to such local regions with the additional landmarks for those regions. In other words, the same method is applied with the expanded landmark set to which additional landmarks are added. Our proposed algorithm for spot matching empirically proved reliable analysis of protein separation image by producing higher accuracy.

• 한국수자원학회논문집
• /
• 제38권11호
• /
• pp.927-935
• /
• 2005

강우에 따른 토사유실은 호소내 저수용량 감소 및 탁수 등의 수질오염을 유발하기 때문에 유역관리 측면에서 중요한 인자가 된다. 최근 GIS를 활용한 토사유실평가 연구가 진행되고 있으나, 토사유실 원인지역에 대한 검토는 고려하지 않고 있다. 본 연구에서는 GIS 기반 토사유실모델을 활용하여 임하호 유역의 토사유실량을 산정하였으며, SPOT 5 고해상도 위성영상과 토지피복도 자료를 활용하여 토사유실원인지역을 검토하였다. 분석결과 토사유실이 높게 나타나는 지역의 대부분이 밭으로 확인되었으며 그 위치를 영상에서 효과적으로 확인할 수 있었다. 또한 위성영상에서 경계를 확인하기 곤란했던 밭과 과수원이 공통으로 나타나는 지역은 현장확인을 통해 그 적정성을 검토할 수 있었다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1165-1167
• /
• 2003

Geometric corrections are required to compensate skew effects, earth rotation effects and so on. Parameters for geometric modeling can be acquired from the metadata information. These parameters allow to locate on ground every pixel of acquired images. In this paper, we tested the precision of geometric modeling of linear pushbroom images, acquired by SPOT 3 and 5 using the satellite orbit information itself without additional external data. The result acquired from examination to recovery the geometry of image using 30 GCPs have about 650m RMSE in SPOT 3 and about 170m RMSE in SPOT 5.

• 한국지리정보학회지
• /
• 제2권1호
• /
• pp.32-44
• /
• 1999

본 연구의 목적은 질감을 분광정보와 함께 사용했을 때의 분류정확도의 향상을 평가하는데 있다. 먼저 부산지역의 SPOT HRV 영상에 최대우도분류를 적용하여 토지피복도를 작성하였다. 그리고 3번 파장에서 다양한 질감을 추출한 다음, 이 질감을 신파장의 형태로 분광정보에 통합하여 분류하여 질감의 사용이 분류의 정확도에 미치는 영향을 질감별로 평가하였다. 정확도 평가는 전체적인 정확도와 토지피복별 정확도로 구분하였다. 연구결과 전체적인 정확도 향상을 관측할 수 있었는데, 특히 엔트로피의 개선 효과가 우수하였다. 그리고 창의 크기는 $5{\times}5$와 $7{\times}7$이 적절한 것으로 나타났다. 그리고 질감에 따라서는 전체적인 정확도는 향상되지 않더라도 일부 토지피복의 정확도는 개선되는 것으로 나타났다. 토지피복별로는 저층건물지역, 아파트 단지. 고층건물지역, 공업지역 등 도시지역의 개선효과가 높은 것으로 나타났다.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2005년도 추계 종합학술대회 논문집
• /
• pp.335-339
• /
• 2005

사진측량학적 처리에 의하여 SPOT 5호 HRG supermode 영상으로부터 수치고도모형(DEM)을 생성하였다. 생성된 DEM의 정착도를 분석하기 위하여 1/5000 축척의 수치지형도로부터 기준 DEM을 작성하고 설정한 여러 시험구간상에서 비교하였다. 또한 수치표면모형(DSM)과 3D 건물모델링을 행하였다.