• Wind and Structures
• /
• 제31권3호
• /
• pp.269-285
• /
• 2020

The statistical characteristics of typhoon wind speed records tend to have a considerable time-varying trend; thus, the stationary wind model may not be appropriate to estimate the wind characteristics of typhoon events. Several nonstationary wind speed models have been proposed by pioneers to characterize wind characteristics more accurately, but comparative studies on the applicability of the different wind models are still lacking. In this study, three landfall typhoons, Ampil, Jongdari, and Rumbia, recorded by ultrasonic anemometers atop the Shanghai World Financial Center (SWFC), are used for the comparative analysis of stationary and nonstationary wind characteristics. The time-varying mean is extracted with the discrete wavelet transform (DWT) method, and the time-varying standard deviation is calculated by the autoregressive moving average generalized autoregressive conditional heteroscedasticity (ARMA-GARCH) model. After extracting the time-varying trend, the longitudinal wind characteristics, e.g., the probability distribution, power spectral density (PSD), turbulence integral scale, turbulence intensity, gust factor, and peak factor, are comparatively analyzed based on the stationary wind speed model, time-varying mean wind speed model and time-varying standard deviation wind speed model. The comparative analysis of the different wind models emphasizes the significance of the nonstationary considerations in typhoon events. The time-varying standard deviation model can better identify the similarities among the different typhoons and appropriately describe the nonstationary wind characteristics of the typhoons.

• 대한전자공학회논문지SP
• /
• 제41권3호
• /
• pp.231-238
• /
• 2004

주파수 영역에서의 적응 신호처리는 입력의 자기 상관 행렬에 이산 퓨리에 변환(DFT Discrete Fourier Transform)을 이용할 때 거의 대각선화 되는 특성으로 인해 시간영역 적응필터보다 주파수 영역 적응 필터가 빠르게 적응한다. 본 논문에서는 변형된 이산 퓨리에 변환(MDFT: modified DFT)을 이용하여 주파수 영역 적응 필터를 설계함으로써 안정한 수렴 속도를 갖는 잡음 제거 시스템을 제안한다. 제안한 구조는 MDFT를 이용하여 연산수를 최소화하며, 안정한 수렴을 유지하면서 블록 없는 처리를 할 수 있고, 최적의 수렴 속도를 위해 입력 자기 상관 행렬에 MDFT를 사용해 근사적으로 대각화 시키고 시간적으로 변하는 스텝 크기를 정규화 하는 고속 적응 잡음 제거(HANR: high speed adaptive noise reduction) 알고리즘이다. HANR 알고리즘을 적용한 필터는 DFT변환법을 사용한 LMS방법(non-proposed)보다 30%정도의 속도 개선이 있다.

• 한국소음진동공학회논문집
• /
• 제11권7호
• /
• pp.253-260
• /
• 2001

A Study of interior noise reduction in the magelv train is presented. Tarin speed of interest is low such that aero-dynamic noise is negligible and power supply system is a dominant noise source. Based on the measurements of interior noise and acceleration levels during running and zero speed conditions, dominant noise sources are identified. After spectra characteristics of noise sources are investigated several noise reducing methods are studied such as STL increasement of floor panels. sealing. and absorption treatment It is found that the most important noise sources are VVVF inverter and SLM in running condition, whereas air conditioner and DC/DC converter are dominant in zero speed. Sine the major noise sources are under the floor complete sealing and high STL of the floor panel are shown to be the most crucial factors in noise reduction After sound absorbing material, which is polyurethan foam of 50 mm thickness, is thickness, is attached to the downward side of the floor in addition to sealing treatment, the interior noise is reduced by 3~4 dB.

• Tribology and Lubricants
• /
• 제32권4호
• /
• pp.107-112
• /
• 2016

This paper presents a rotordynamic analysis of the reduction gear system applied to the 250 kW super critical CO₂ cycle. The reduction gear system consists of an input shaft, intermediate shaft, and output shaft. Because of the high rotating speed of the input shaft, we install tilting pad bearings, rolloer bearings support the intermediate and output shafts. To predict the tilting pad bearing performance, we calculate the applied loads to the tilting pad bearings by considering the reaction forces from the gear. In the rotordynamic analysis, gear mesh stiffness results in a coupling effect between the lateral and torsional vibrations. The predicted Campbell diagram shows that there is not a critical speed lower than the rated speed of 30,000 rpm of the input shaft. The predicted modes on the critical speeds are the combined bending modes of the intermediate and output shaft, and the lateral vibrations dominate when compared to the torsional vibrations. The damped natural frequency does not strongly depend on the rotating speeds, owing to the relatively low rotating speed of the intermediate and output shaft and constant stiffness of the roller bearing. In addition, the logarithmic decrements of all the modes are positive; therefore all modes are stable.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.197-202
• /
• 2005

Current Optical Disk drive is dominating high share gradually in information storage device market through development of great skill. These technologies can achieve not only improvement of transmission speed but also elevation of recording/reproduction technology. However, these present state cause not only the increase of vibration in structural viewpoint but also problem of serious noise while the ODD becomes high speed/high performance. Specially, air-born noise is being bigger than structural-born noise as disk rotation speed increases gradually. The object of this research is that reduce the air-born noise in optical disk drive by reducing a quantity of flow by using a miniaturized muffler. The micro muffler is a miniaturized muffler. The muffler is used widely by solution to reduce air-born noise which is generated by flow. According to frequency band of the noise source, it can be applied by muffler of various forms. In this research, we examined the noise characteristics of the micro muffler and applied it by noise reduction solution of the ODD. It could get an excellent noise reduction in high frequency band by using the micro muffler than the opened case through the decrease of an inner flow. But it could not get a noise reduction in low frequency band through the decrease of an inner flow.

• 한국철도학회논문집
• /
• 제19권6호
• /
• pp.709-716
• /
• 2016

고속열차의 공기저항 저감을 위해 KTX-산천의 구성요소별 공기저항을 상세하게 분석하였다. 전체 공기저항의 약 42.9%는 동력차(선두차, 후미차)에서 그리고 약 10.1%는 대차에서 유발되는 것으로 나타났다. 전두부의 공기저항 저감을 위해 Broyden-Fletcher-Goldfarb-Shanno 기법을 이용한 전두부 최적설계를 수행하였다. 그리고 차체 공기저항 저감을 위해 동력차 형상 변화 및 대차커버를 적용하였다. 공기저항 저감을 위해 최적설계된 편성열차의 공기저항은 KTX-산천 대비 약 15.0% 저감되었으며, 주행저항은 속도 350km/h에서 약 12% 감소될 것으로 예상된다.

• 한국소음진동공학회논문집
• /
• 제23권3호
• /
• pp.234-239
• /
• 2013

There are many types of speed reducer for industrial uses. However the cycloid speed reducer is widely used in manipulators based on excellent performance of low backlash, high reduction ratio and compact size. It is essential to use precision speed reducer for accuracy of position controls on robot systems and electric vehicles. The cycloid speed reducer has a eccentric rotating motion and offset to avoid some problem of assembly, so it has a disadvantage for vibration. In this paper, a multi-body dynamic model is developed for a cycloid speed reducer and the dynamic behaviors of the reducer are investigated. The cycloid speed reducer consists of cycloidal plate gears, housing gear, input shaft, output pin and shaft, and eccentric bearings. Using a CAD program, each component of cycloid reducer is modeled based on the offset and eccentric. Multi-body simulations using Recurdyn and test using a rig tester are performed. As a result, the pin reaction force and the amplitude of housing displacement are increased by the larger offset and smaller eccentric value of cycloid reducer.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1227-1232
• /
• 2008

High-speed train of push-pull type called as G7 train has been developed and chosen as the model of KTX-II which will be operated on Honam Line nexr year. However, the EMU-type high-speed train appeared to be the recent trend that foreign markets have shown. Also, in the near future, a great number of new train sets are needed to accommodate the increased passengers in our country. Thus, development of the high-speed EMU was decided, planned, and started. In the development, included were almost all fundamental key technologies such as noise and vibration reduction in a passenger cabin, running characteristics, aerodynamic analysis, crashworthiness evaluation, EMI/EMC analysis, design of the cooling system for the propulsion control system, enhanced performance of transformer and switching converters, synchronous traction motor with permanent magnets, new design of front nose and ergonomic interiors, application of advanced information technology(IT) and smart sensors and the cost reduction of construction of railway bridges, etc. Each key technologies are carried out as sub-project independently but under the supervision of a project. The project will develop the high advanced level of technologies and provide necessary know-why's and support the team in charge of the development of the high-speed EMU, Hyundai Rotem Co. Ltd. The high-speed EMU will be successfully developed with the support of the project.

• 한국항공우주학회지
• /
• 제44권1호
• /
• pp.23-32
• /
• 2016

초고속으로 비행하는 물체의 항력을 줄이기 위해 노즈콘으로부터 제트를 분사하는 다양한 연구가 진행되고 있다. 본 연구에서는 항력감소의 기초자료와 핵심 변수를 파악하기 위해서 미국의 항력감소용 분사 제트 연구 동향을 조사하고 요약하였다. 연구에 활용한 노즈콘 모델의 형상은 반구 실린더, 잘린 콘, 재돌입 캡슐이었으며, 각 모델의 시험조건에 대해 정리하였다. 항력감소의 핵심 변수는 분사제트의 마하수, 질량유량, 압력비율이다. 항력감소효과는 주어진 조건에 따라 다양한 결과를 보였지만, 최대 40~50% 정도까지 항력이 감소하였다.

• 한국콘텐츠학회논문지
• /
• 제21권12호
• /
• pp.302-309
• /
• 2021

구간과속단속시스템은 시점 순간속도, 종점 순간속도, 구간 평균속도를 측정하여 가장 많이 과속한 부분에 대해서만 과태료를 부과하는 방식으로 관련 연구 자료에 따르면 해당 시스템을 적용한 도로에서 속도 및 사고 감소 효과가 있는 것으로 알려져 있다. 하지만 도로교통법에 따라 시스템의 대부분은 고속도로에 설치되어 기존의 연구는 고속도로 구간을 대상으로 수행되어 왔다. 본 연구에서는 관련법령 개정에 따라 일반국도에도 구간과속단속시스템의 설치가 확대될 것으로 예상 되는 바 일반국도 자동차전용도로인 국도3호선 성남이천로에 설치된 구간과속단속시스템을 대상으로 ITS 수집 및 운영 자료를 활용하여 설치 전, 시범운영기간, 단속이후로 구분하여 통행속도, 통행속도에 대한 표준편차 및 교통사고 감소여부를 분석하였다. 분석결과 설치 후 통행속도, 표준편차, 교통사고는 각각 13%, 25%, 70% 감소하여 구간과속단속시스템 설치가 사고감소에 기여하는 바가 큰 것으로 확인되었다.