• Title/Summary/Keyword: SPE

Search Result 515, Processing Time 0.028 seconds

Empirical Forecast of Solar Proton Events based on Flare and CME Parameters

  • Park, Jin-Hye;Moon, Yong-Jae
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.36 no.2
    • /
    • pp.97.1-97.1
    • /
    • 2011
  • In this study we have examined the probability of solar proton events (SPEs) and their peak fluxes depending on flare (flux, longitude and impulsive time) and CME parameters (linear speed, longitude, and angular width). For this we used the NOAA SPE list and their associated flare data from 1976 to 2006 and CME data from 1997 to 2006. We find that about 3.5% (1.9% for M-class and 21.3% for X-class) of the flares are associated with SPEs. It is also found that this fraction strongly depends on longitude; for example, the fraction for $30W^{\circ}$ < L < $90W^{\circ}$ is about three times larger than that for $30^{\circ}E$ < L < $90^{\circ}E$. The SPE probability with long duration (${\geq}$ 0.3 hours) is about 2 (X-class flare) to 7 (M-class flare) times larger than that for flares with short duration (< 0.3 hours). In case of halo CMEs with V ${\geq}$ 1500km/s, 36.1% are associated with SPEs but in case of partial halo CME ($120^{\circ}$ ${\leq}$ AW < $360^{\circ}$) with 400 km/s ${\leq}$ V < 1000 km/s, only 0.9% are associated with SPEs. The relationships between X-ray flare peak flux and SPE peak flux are strongly dependent on longitude and impulsive time. The relationships between CME speed and SPE peak flux depend on longitude as well as direction parameter. From this study, we suggest a new SPE forecast method with three-steps: (1) SPE occurrence probability prediction according to the probability tables depending on flare and CME parameters, (2) SPE flux prediction from the relationship between SPE flux and flare (or CME) parameters, and (3) SPE peak time.

  • PDF

Silkworm pupal extracts attenuate interleukin-1β-induced expression of matrix metalloproteinases and inflammatory mediators in the SW1353 human chondrosarcoma cell line

  • Kamidi Rahul;HaeYong Kweon;Ji Hae Lee
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • v.46 no.2
    • /
    • pp.60-66
    • /
    • 2023
  • Osteoarthritis (OA) is one of the most prevalent degenerative joint diseases and is more common in older and obese individuals. Silkworm male pupae exerts tonic effects by increasing testosterone secretion and the forced swimming time and muscle ratio increased in mice consuming silkworm pupae, which may be beneficial to the older population. Therefore, it will be beneficial to investigate the effects of silkworm pupal extracts (SPE) on OA. To confirm this effect, we prepared SPE in different solvents, and their ability to attenuate matrix metalloproteinases (MMPs) and inflammatory mediators (interleukin-6 [IL-6], interleukin-8 [IL-8] and tumor necrosis factor-α [TNF-α]) were evaluated in an interleukin-1β (IL-1β)-induced SW1353 human chondrosarcoma cell line. 70% ethanolic SPE outperformed the other solvents, reducing MMP-1 and MMP-3 expression by up to 53% and 13%, respectively. Further experiments were performed using 70% ethanolic SPE from three distinct pupation stages in males and females. SPE treatment alleviated MMP-1 expression (43.9-47.4%) regardless of pupation stage and sex. Among the inflammatory mediators, 70% ethanolic SPE alleviated IL-6 and TNF-α levels, and the concentrations thereof were lowest in the early-stage male SPE-treated group (43.15% and 56.74%, respectively). In conclusion, 70% ethanolic SPE may prevent IL-1β-induced osteoarthritis by inhibiting MMPs and inflammatory cytokines. Therefore, SPE is a potential therapeutic agent for the treatment of OA.

Development of the Spcular Optical design Program for Flourescent Luminaires (형광등기구용 경면 방사판의 광학 설계 프로그램 개발)

  • Jeong, Jae-Hoon;Jin, Sang-Kyu;Kim, Hoon
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.13 no.3
    • /
    • pp.1-6
    • /
    • 1999
  • SpeROD, the optical design program. is developed far specular reflectors of fluorescent luminaries. SpeROD can save much tirre when to design specular reflectors. SpeROD calculates conditions 2-dimensionally. The conditions for designing reflectors considered in this program are the intensity distribution, reflector type, and Tangent Spiral Design method. Using SpeROD, uniform intensity distribution type and bat-wing type reflectors are simulated in this paper, and alrrnn(T8) diarreter fluorescent lamp and lmnm width reflector are used for the setting. The sarre setting was simulated in FIElD, the intensity distribution prediction program. and the' result represented the intensity distribution and the efficacy simulated in SpeROD were satisfactory.actory.

  • PDF

Enhancement of Alcohol Metabolism by Sprouted Peanut Extract in SD Rats

  • Seo, Ji Yeon;Kim, Seong Soon;Kim, Jong-Sang
    • Preventive Nutrition and Food Science
    • /
    • v.19 no.1
    • /
    • pp.1-4
    • /
    • 2014
  • Excessive ethanol intake is known to induce a number of physiological symptoms, including headache, dizziness and vertigo. In this study, we investigated the attenuation effect of sprouted peanut extract (SPE) on ethanol-induced hangover in male Sprague-Dawley rats. The animals were divided into five groups: the control group, which was administered ethanol only; the ethanol plus SPE experimental groups, which were administered ethanol and 100, 200, or 400 mg SPE/kg b.w.; and the positive control group, which was administered ethanol plus DAWN808$^{(R)}$, a commercial product. SPE-suspended water was delivered to rats via gavage 15 h and 30 min before the administration of ethanol. Blood was collected from the tail 0, 1, 3, and 5 h after ethanol administration. The results showed that serum ethanol concentrations were significantly lower in SPE treated groups than in the control group. Furthermore, hepatic alcohol and acetaldehyde dehydrogenase activities were enhanced by SPE in a dose dependent manner. These results suggest that SPE could be useful in attenuating hangover after alcohol consumption.

Charge/Discharge Properties of Camon Added $LiFeO_4$

  • Jin, En-Mei;Li, Hu;Jeon, Yeon-Su;Park, Kyung-Hee;Gu, Hal-Bon
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2007.06a
    • /
    • pp.361-362
    • /
    • 2007
  • Phospho-olivine $LiFePO_4$ cathode materials were prepared by hydrothermal reaction. Carbon black was added to enhance the electrical conductivity of $LiFePO_4$. The structural and morphological performance of $LiFePO_4$ and $LiFePO_4$-C powders were characterized by X-ray diffraction (XRD) and FE-SEM. $LiFePO_4/SPE/Li$ and $LiFePO_4$-C/SPE/Li cells were characterized electrochemically by charge/discharge experiments. The results showed that the discharge capacity of $LiFePO_4$-C/SPE/Li cell was 103 mAh/g at the first cycle. The discharge capacity of $LiFePO_4$-C/SPE/Li cell with 5 wt% carbon black was the largest among $LiFePO_4$-C/SPE/Li cells, 126 mAh/g at the first cycle and 123 mAh/g after 30 cycles, respectively. It was demonstrated that cycling performance of $LiFePO_4$-C/SPE/Li cell with 5 wt% carbon black was better than that of $LiFePO_4$/SPE/Li cell.

  • PDF

Analysis on Operational Characteristics of PV-SPE System by a Novel MPPT Control (PV-SPE 시스템을 위한 새로운 MPPT 제어의 운전특성 분석에 관한 연구)

  • Choi, Jong-Ho;Lee, Dong-Han;Kim, Jong-Hyun;Kim, Jae-Ho;Park, Min-Won;Yu, In-Keun
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2006.06a
    • /
    • pp.121-124
    • /
    • 2006
  • In the newly developed control method, the current flowing into SPE cell is the only one considerable factor. So, the structure of control circuit becomes simple and the manufacturing cost of the control device decreases. In conventional power comparison MPPT control method however, a voltage and current coming out from PV cell should be feedbacked to chase maximum power point at every moment. Then, the structure of control circuit becomes so complex and the risk of control failure is much higher than the novel MPPT control method. Therefore, PV generation system by a novel MPPT control method is especially operated much more safely in case of a huge system, because the voltage coming out from PV-cell is not needed to be feedbacked. In this paper, the PV-SPR system was actually manufactured based on the simulation model of PSCAD/EMTDC program and the results tested were shown. Authors are sure that it is the most useful method to maximize power from PV to SPE with only a feedback of SPE input current.

  • PDF

Swertia pseudochinensis Methanol Extract Inhibits IgE-mediated Allergic Response In vitro and In vivo (자주쓴풀 메탄올추출물의 IgE-매개 알레르기 반응 억제 및 기전)

  • Jeon, Sun Ha;Kim, Young Mi
    • Korean Journal of Pharmacognosy
    • /
    • v.51 no.4
    • /
    • pp.317-324
    • /
    • 2020
  • Mast cells play a key role in IgE-mediated allergic response. We investigated whether Swertia pseudochinensis Hara extract (SPE) inhibits IgE-mediated allergic response in mast cells and an allergic animal model. Additionally, we explored SPE's mechanism of action in mast cells. Our results showed that SPE inhibited both antigen-stimulated degranulation and the production of TNF-α and IL-4 in bone marrow-derived mast cells (BMMCs) and rat basophilic leukemia (RBL)-2H3 cells. SPE also suppressed allergic response in IgE-mediated passive cutaneous anaphylaxis (PCA) in mice. As for the mechanism of action of SPE in mast cells, it inhibited the activation of Syk kinase, a critical signaling protein in the FcεRI-mediated signaling pathway, and also the activation of LAT, a downstream adaptor protein of Syk. We further observed the reduced activation of mitogen-activated protein (MAP) kinases (P38, ERK1/2, and JNK) and Akt in mast cells. Our results described for the first time that SPE has an anti-allergic effect by suppressing mast cells through the inhibition of Syk kinase. Therefore, SPE may be useful for the treatment of type I allergic diseases.

The Study on the Rapid Screening of Schedule Chemicals in Aqueous Solution Using SPE-ACF (수용액에서 SPE-ACF를 이용한 특정화학물질의 신속 스크리닝 기법 연구)

  • Park, Hoon;Jung, Chang-Hee;Lee, Yong-Han;Hong, Dea-Sik
    • Journal of the Korean Chemical Society
    • /
    • v.52 no.3
    • /
    • pp.239-248
    • /
    • 2008
  • study of the solid phase extraction (SPE) technique using activated carbon fiber (ACF) as a sorbent was carried out on the schedule chemicals in water. 14 different schedule chemicals, which are the hydrolysis products and simulants of chemical agents such as alkylphosphonate, thiodiglycol etc. were selected for the study. Pyridine was used as a promoter to increase the derivatization efficiency, especially to improve silylation of 3-quinuclidinol. To improve the recovery efficiency of amines in the water solution, 1 mL of 5% Et3N/MeOH was introduced into SPE-ACF before the water sample loading. Throughout this study, the optimum condition was established to detect rapidly above chemicals in water.

Characterizations of Pt-SPE Electrocatalysts Prepared by an Impregnation-Reduction Method for Water Electrolysis (함침-환원법으로 제조된 수전해용 Pt-SPE 전극촉매의 특성)

  • Jang, Doo-Young;Jang, In-Young;Kweon, Oh-Hwan;Kim, Kyoung-Eon;Hwang, Gab-Jin;Kang, An-Soo
    • Journal of Hydrogen and New Energy
    • /
    • v.17 no.4
    • /
    • pp.440-447
    • /
    • 2006
  • Solid polymer electrolyte(SPE) membrane with electrodes embedded on both faces offer unique possibilities for the electrochemical cells like water electrolyzer with fuel cell. The Nafion 117 membrane was used as the SPE, and $Pt(NH_3)_4Cl_2$ and $NaBH_4$ as the electrocatalysts and reducing agent, respectively. The 'impregnation-reduction(I-R) method' has been investigated as a tool for the preparation of electrocatalysts for water electrolyzer by varying the concentration of reducing agent and reduction time at fixed concentration of platinum salt, 5 mmol/L. Pt-SPE electrocatalysts prepared by non-equilibrium I-R method showed the lowest cell voltage of 2.17 V at reduction time, 90 min and with concentration of reducing agent 0.8 mol/L and the cell voltage with those by equilibrium I-R method was 2.42 V at reduction time, 60 min and with concentration of reducing agent 0.8 mol/L. The cell voltage were obtained at a current density $1\;A/cm^2$ and $80^{\circ}C$. In water electrolysis, hydrogen production efficiency by Pt-SPE electrocatalyst is 68.2% in case of non-equilibrium I-R method and 61.2% at equilibrium I-R method.

Degradation of Rhodamine B in Water using Solid Polymer Electrolyte (SPE) in the Electrolysis Process (고체 고분자 전해질(SPE)을 이용한 전기분해 공정에서 Rhodamine B 분해)

  • Park, Young-Seek
    • Journal of Environmental Health Sciences
    • /
    • v.40 no.2
    • /
    • pp.137-146
    • /
    • 2014
  • Objectives: Feasibility of electrochemical oxidation of the aqueous non-biodegradable wastewater such as cationic dye Rhodamine B (RhB) has been investigated in an electrochemical reactor with solid polymer electrolyte (SPE). Methods: Nafion 117 cationic exchange membrane as SPE has been used. Anode/Nafion/cathode sandwiches were constructed by sandwiching Nafion between two dimensionally stable anodes (JP202 electrode). Experiments were conducted to examine the effects of applied current (0.5~2.0 A), supporting electrolyte type (0.2 N NaCl, $Na_2SO_4$, and 1.0 g/L NaCl), initial RhB concentration (2.5~30.0 mg/L) on RhB and COD degradation and $UV_{254}$ absorbance. Results: Experimental results showed that an increase of applied current in electrolysis reaction with solid polymer electrolyte has resulted in the increase of RhB and $UV_{254}$ degradation. Performance for RhB degradation by electrolyte type was best with NaCl 0.2 N followed by SPE, and $Na_2SO_4$. However, the decrease of $UV_{254}$ absorbance of RhB was different from RhB degradation: SPE > NaCl 0.2 N > $Na_2SO_4$. RhB and $UV_{254}$ absorbance decreased linearly with time regardless of the initial concentration. The initial RhB and COD degradation in electrolysis reaction using SPE showed a pseudo-first order kinetics and rate constants were 0.0617 ($R^2=0.9843$) and 0.0216 ($R^2=0.9776$), respectively. Conclusions: Degradation of RhB in the electrochemical reactor with SPE can be achieved applying electrochemical oxidation. Supporting electrolyte has no positive effect on the final $UV_{254}$ absorbance and COD degradation. Mineralization of COD may take a relatively longer time than that of the RhB degradation.