• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.8
• /
• pp.2033-2042
• /
• 1993

In conventional SCC susceptibility test, there are constant strain test, constant load test, slow strain rate test(SSRT) and K$_{ISCC}$ test. Among them, the SSRT method is much more aggressive in producing SCC than the other tests, so that the test time of it is considerably reduced. But this SSRT method has mostly been worked using the uniaxial tensile specimen untill now. Therefore, the SSRT method using the tensile specimen(Ten-SSRT) has much difficulty in SCC susceptibility evaluation of a localized region like weldment and the advantage material of high order. Recentely, the small punch(SP) test method using miniaturized small specimen is the very effective test method for fracture strength evaluation of a localized region like weldment and fusion reactor wall irradiated in the nuclear power plant. This paper investigated the possibility of SCC susceptibility evaluation by the SP-SSRT method using the miniaturized small specimen. Therefore, we obtained the result that the SP-SSRT had the possibility for the evaluations of SCC susceptibility for shorter time to corrosive environment compare to Ten-SSRT which was conventional method.

• The Korean Journal of Mycology
• /
• v.40 no.4
• /
• pp.187-190
• /
• 2012

Various koji were prepared by fungi isolated from traditional nuruk and their quality characteristics were investigated. Acidity and saccharification power of their koji were ranged in 5.0~6.8 and 128sp~241sp. Nine fungi which were showed good quality and sensory evaluation were identified by analysis of their nucleotide sequences with PCR-amplified 18S rDNA internal transcribed spacer-1(ITS-1) and ITS-4 genes. Among them, six strains were identified as Aspergillus oryzae and the other strains were identified as Mycocladus corymbiferus, Rhizo-pus oryzae, Lichtheimia corymbifera.

• Journal of Surface Science and Engineering
• /
• v.32 no.3
• /
• pp.467-471
• /
• 1999

BN films were grown on silicon (l00) substrate by magnetically enhanced activated reactive evaporation (ME-ARE) with pulsed DC power instead of r.f. for substrate biasing. The deposited films were analyzed using Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). FTIR results show that the intensity of absorption band of $sp^2$ bond of BN decreased and that of $sp^3$ bond of c-BN increased with increasing pulsed DC bias voltage applied to substrate. The initially grown layer at the interface was observed by TEM and considered to be of$ sp^2$-bonded BN. The cross-sectional and planar TEM micrographs show that the upper layer on the initial layer was the single phase c-BN. It is concluded that cubic boron nitride films could be synthesized by ME-ARE process with pulsed DC biasing.

• Nuclear Engineering and Technology
• /
• v.53 no.5
• /
• pp.1403-1415
• /
• 2021

The transient capability of a SP₃ based pin-wise core analysis code SPHINCS is developed and verified through the analyses of the C5G7-TD benchmark. Spatial discretization is done by the fine mesh finite difference method (FDM) within the framework of the coarse mesh finite difference (CMFD) formulation. Pin size fine meshes are used in the radial fine mesh kernels. The time derivatives of the odd moments in the time-dependent SP₃ equations are neglected. The pin homogenized group constants and Super Homogenization (SPH) factors generated from the 2D single assembly calculations at the unrodded and rodded conditions are used in the transient calculations via proper interpolation involving the approximate flux weighting method for the cases that involve control rod movement. The simplifications and approximations introduced in SPHINCS are assessed and verified by solving all the problems of C5G7-TD and then by comparing with the results of the direct whole core calculation code nTRACER. It is demonstrated that SPHINCS yields accurate solutions in the transient behaviors of core power and reactivity.

• Proceedings of the KIEE Conference
• /
• 2002.11b
• /
• pp.164-166
• /
• 2002

발전기 주변의 선로에서 사고가 발생하였을 때, 발전기의 출력이 선로를 통해서 흐르지 못해 그 결과 과도불안정현상이 생길 수 있다. 이러한 과도불 안정현상을 막기 위한 SPS가 설치, 운영되고 있는데 그 알고리즘의 하나로서 동면적법을 기반으로 한 알고리즘을 구현하였다. 대상 발전기군을 하나의 등가 발전기로 모델링 한 다음, 유효전력과 무효전력 출력의 측정값을 이용해서 계산을 통해 위상각-출력 곡선을 구하였다. 그런 다음 현재의 운동에너지와 안정도 한계값인 임계에너지의 값을 비교하여 안정도를 판별하고, 만일 불안정한 경우 필요한 발전기의 탈락량을 계산하였다. 이 알고리즘을 6기 5모선 계통에서 모의하여 결과를 검증하였다.

• The Journal of Korean Medicine
• /
• v.29 no.2
• /
• pp.107-115
• /
• 2008

Objectives: The objective of this study was to assess the effects of acupuncture applied at PC6 and SP4 points on heart rate variability (HRV) in normal subjects under mental stress Methods: 24 healthy male subjects were recruited and randomized to a treatment group (12 subjects) or a control group (12 subjects). Both groups performed a mental arithmetic stress test and then acupuncture needles were inserted on PC6 and SP4 for the study group. In the control group, they took sham acupuncture as a control. Heart rate variability (HRV) was measured during the whole study period by FM-150 (digital Holter ECG recorder). Results: In the both groups, low frequency (LF) power and ratio of low frequency to high frequency (LF/HF) was significantly increased after mental stress. Acupuncture induced significant decrease in low frequency (LF) power and ratio of low frequency to high frequency (LF/HF) which were increased after mental stress test. But sham acupuncture induced no changes. Results: In both groups, low frequency (LF) power and ratio of low frequency to high frequency (LF/HF) significantly increased after mental stress. Acupuncture induced significant decrease in low frequency (LF) power and ratio of low frequency to high frequency (LF/HF) which increased after mental stress test. In contrast, sham acupuncture induced no changes. Conclusions: Acupuncture on PC6 and SP4 could be useful to decrease sympathetic activity and balance autonomic nervous system for those who are under stress.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.192-193
• /
• 2006

An AC electrical railroad system has rapidly changing dynamic single-phase load, and at a feeding substation, three-phase electric power is transformed to the paired directional single-phase electric power. There is a great difference in electrical phenomenon between the load of AC electrical railroad system and that of general power system. Electric characteristics of AC electrical railroad's trainload are changed continuously according to the traction, operating characteristic, operating schedule, track slope, etc. Because of the long feeding distance of the dynamic trainload, power quality problems such as voltage drop, voltage imbalance and harmonic distortion may also occur to AC electrical railroad system. These problems affect not only power system stability. but also power quality deterioration in AC electrical railroad system. The dynamic simulation model of AC electrical railroad system presented by PSCAD/EMTDC is modeled in this paper, and then, it is analyzed voltage drop and power quality for AC electrical railroad system both with single-Phase distributed STATCOM(Static Synchronous Compensator) installed at SP(Sectioning Post) and without.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.326-329
• /
• 2003

When an electrokinetic process is applied to a HOC-contaminated soil, hybrid types combined with soil flushing, chemical oxidation, and bioremediation are generally used. Especially when the electrokinetic process is combined with bioremediation, the hybrid technology can solve several limits of bioremediation such as low microbial mobility, low soil temperature, and shortage of nutrients in subsurface circumstance. Because microbial surface is charged negatively, the microorganism moves from cathode to anode under electrical field. In this study, mixed culture mainly-consisted by Pseudomonas sp. was applied to remediate pentadecane-contaminated kaolinite with particle size less than 300${\mu}{\textrm}{m}$. This remediation system was named ‘electrokinetic bioaugmentation’ and consisted of model aquifer, electrode reservoirs, bioreactor, power supply, and pump. The mixed culture above 0.5 of optical density in bioreactor was supplied to two reservoirs and penetrated soil when the electric current was applied. To enhance the removal efficiency, the optimal medium composition, electric current, and voltage were investigated.

• Journal of the Korean Society of Tobacco Science
• /
• v.7 no.1
• /
• pp.75-84
• /
• 1985

A strain of Trichoderm sp. J-30 which strongly products cellulase to reduce the content of cellulose in the stem of leaf tobacco was isolated from leaf tobaco. The Trichoderma sp. J-30 was identified as Trochoderma voride. The cellulase from this strain was purified with the physico-chemical methods and treated in the culled stem of leaf tobacco. The results obtained were summarized as follows. 1. Optimal pH of the enzyme was at pH 5.0. 2. The enzyme shooed a higher activity at $40^{\circ}C$ and its thermal stability began to decrease at $60^{\circ}C$. 3. The enzyme activity was promoted by the metal ions such as $Ca^{2+}, Mg^{2+}, Pb^{2+}and\;Zn^{2+}.$ 4. When the culled stem of leaf tobacco was applied with the 3% of the enzyme solution at $40^{\circ}C$ for 3 days. 15 to 17% of cellulose contents decreased, 12 to 13% of total sugar increased and the filling power was increased by 10-13% in the sample.

• Microbiology and Biotechnology Letters
• /
• v.50 no.1
• /
• pp.122-125
• /
• 2022

The cellulose-fed microbial fuel cell (MFC) is a biotechnological process that directly converts lignocellulosic materials to electricity without combustion. In this study, the cellulose-fed, MFC-integrated thermophilic bacterium, Bacillus sp. WK21, with endoglucanase and exoglucanase activities of 1.25 ± 0.08 U/ml and 0.95 ± 0.02 U/ml, respectively, was used to generate electricity at high temperatures. Maximal current densities of 485, 420, and 472 mA/m² were achieved when carboxymethyl cellulose, avicel cellulose, and cellulose powder, respectively, were used as substrates. Their respective maximal power was 94.09, 70.56, and 89.30 mW/m³. This study demonstrates the value of the novel use of a cellulase-producing thermophilic bacterium as a biocatalyst for electricity generation in a cellulose-fed MFC.