• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.8
• /
• pp.726-735
• /
• 2007

Inside the factory buildings of aprecision industry (which produces semiconductors or TFT-LCD), thousands of vibration-sensitive precision equipments operate in the clean rooms. Various utility equipments that are installed around them for proper operation cause various sources of noise and of vibration to exist inside the clean rooms and thus deteriorate the noise and the vibration environment within. In this study, we check if the existing transient vibration phenomenon is caused by the vibrations that arise from operating the utility installed near these equipments; compare and evaluate the vibration criteria of precision equipments regarding the transient vibration phenomenon; and check the efficiency of these criteria.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.11
• /
• pp.1082-1088
• /
• 2010

In this paper, we propose a new gel-type biomimetic variable-focus lens system. The miniaturization of conventional lens system is limited due to the use of a set of glass lenses for adjusting the focal length. Biologically inspired by the focus adjustment mechanism of the human eye, a gel-type single lens system with variable-focus is presented. The proposed system consists of a gel-type lens, mechanical parts such as body, rotation ring, and winding-type SMA actuator. In addition, the proposed system is designed to operate with a simple and miniaturized mechanical structure using a new attachment and driving mechanism. The focusing performance of the proposed system is verified through a series of experiments and measurements of the shape of the lens using tomography.

• ETRI Journal
• /
• v.20 no.2
• /
• pp.241-249
• /
• 1998

The structure and electrical characteristics of metal-ferroelectric-semiconductor FET(MFSFET) for a single transistor memory are presented. The MFSFET was comprised of polysilicon islands as source/drain electrodes and $BaMgF_4$ film as a gate dielectric. The polysilicon source and drain were built-up prior to the formation of the ferroelectric film to suppress a degradation of the film due to high thermal cycles. From the MFS capacitor, the remnant polarization and coercive field were measured to be about $0.6{\mu}C/cm^2$ and 100 kV/cm, respectively. The fabricated MFSFETs also showed good hysteretic I-V curves, while the current levels disperse probably due to film cracking or bad adhesion between the film and the Al electrode.

• ETRI Journal
• /
• v.17 no.4
• /
• pp.1-12
• /
• 1996

A novel body-tied silicon-on-insulator(SOI) n-channel metal-oxide-semiconductor field-effect transistor with grounded body electrode named GBSOI nMOSFET has been developed by wafer bonding and etch-back technology. It has no floating body effect such as kink phenomena on the drain current curves, single-transistor latch and drain current overshoot inherent in a normal SOI device with floating body. We have characterized the interface trap density, kink phenomena on the drain current ($I_{DS}-V_{DS}$) curves, substrate resistance effect on the $I_{DS}-V_{DS}$ curves, subthreshold current characteristics and single transistor latch of these transistors. We have confirmed that the GBSOI structure is suitable for high-speed and low-voltage VLSI circuits.

• Journal of the Korean Society for Railway
• /
• v.9 no.5 s.36
• /
• pp.555-560
• /
• 2006

This study finds out and suggests success factors for the application of RIMS project through the case study of Seoul Metro and literature survey. The successful application of RIMS needs expert knowledge and concept of BOM, standardization of maintenance planning, check lists of heavy maintenance inspection, organization structure of rolling stock maintenance offices, material management system of warehousing and the process of parts repairing between offices, connection of material ordering system, problem solving of circular spare parts administration among inspection, maintenance, and material organizational units, systemic serial number management of parts with RFID, daily closing diary connected with work process chart, and sufficient period of RIMS's test run. RIMS contributes to real time management of rolling stock maintenance, transparency of management, reliability of train operation, customer satisfaction, and management innovation.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.57-64
• /
• 2007

RIMS（Rolling Stock Information Maintenance System)　was installed in structure which it can analyze the data base in need of credibility maintenance. So it could accumulate real data without repulsion of working spot. Information system was installed not following to system but following to working spot. The development of RIMS project was started from March 29, 2001 and it has been operating from October 12, 2004 in Chang-dong Car depot for light maintenance in charge subway line4. So substantial data base was accumulated for three years. This study calculated all RAMS data by analyzing data base accumulated in RIMS and used in dada base about credibility maintenance and found investigation of propriety, expectation of the life cycle cost, the improvement plan on credibility of sorts of cars and formation about the cycle of repairing and maintenance. This got MKBSF MKBF and MTBF about devices and sorts of line4 Rolling Stocks for it.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.143-150
• /
• 2007

RIMS（Rolling Stock Information Maintenance System)　was installed in structure which it can analyze the data base in need of credibility maintenance. So it could accumulate real data without repulsion of working spot. Information system was installed not following to system but following to working spot. The development of RIMS project was started from March 29, 2001 and it has been operating from October 12, 2004 in Chang-dong Car depot for light maintenance in charge subway line4. So substantial data base was accumulated for three years. This study calculated all RAMS data by analyzing data base accumulated in RIMS and used in dada base about credibility maintenance and found investigation of propriety, expectation of the life cycle cost, the improvement plan on credibility of sorts of cars and formation about the cycle of repairing and maintenance. This got MKBSF MKBF and MTBF about devices and sorts of line4 Rolling Stocks for it.

• Journal of the Korean Geophysical Society
• /
• v.9 no.1
• /
• pp.7-19
• /
• 2006

Laser scanning is a new technology for obtaining Digital Surface Models(DSM) of the earth surface.It is a fast method for sampling the earth surface with high density and high point accuracy. This paper is for buildings extraction from LiDAR points data. The core part of building construction is based on a parameters filter for distinguishing between terrain and non-terrain laser points. The 3D geometrical properties of the building facades are obtained based on plane fitting using least-squares adjustment. The reconstruction part of the procedure is based on the adjacency among the roof facades. Primitive extraction and facade intersections are used for building reconstruction. For overcome the difficulty just reconstruct of laser points data used with digital camera images. Also, 3D buildings of city area reconstructed using digital map. Finally, In this paper show 3D building Modeling using digital map and LiDAR data.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.03a
• /
• pp.118-119
• /
• 2009

As the rapid development of the electronics, the demand for portable electronics and wireless sensors is growing faster, also with the increased needs of one material which can power it automatically, and then power the electrical devices. The piezoelectric effect of the PVDF material can be used for this. So in this paper, PVDF multilayer films were made for this aim. Make the PVDF / DMAc solution in the 10% concentration; use the spin coater technique to make films with the optimum process parameters: the spin rate is 1260rpm; the spin time is 70s; the dry temperature is 100$^{\circ}C$; the dry time is 30mins. And also, for obtaining the higher $\beta$-phase crystallinity, put the Ca(NH3)2.4H2O into the PVDF / DMAc solution system.

• Korean Journal of Pharmacognosy
• /
• v.25 no.2
• /
• pp.167-170
• /
• 1994

The platelet activating factor (PAF) is a newly discovered chemical mediator, the chemical structure of which is 1-O-alkyl-2-acetyl-sn-glycero-3-phosphocholine. Since PAF has potent and broad activities, its pathophysiological roles have received much attention. To develope a new PAF antagonist from medicinal plants, extracts of twenty medicinal herb were screened using PAF receptor binding, $[^{14}C]$ serotonin release and platelet aggregation.