• Journal of the Korean Ceramic Society
• /
• v.52 no.5
• /
• pp.320-324
• /
• 2015

Optimization of the fabrication process of NiO-yttrium doped barium zirconate (BZY) composite anode substrates using tape-casting for high performance thin-film protonic ceramic fuel cells (PCFCs) is investigated. The anode substrate is composed of a tens of microns-thick anode functional layer laminated over a porous anode substrate. The macro-pore structure of the anode support is induced by micron-scale polymethyl methacrylate (PMMA) pore formers. Thermal gravity analysis (TGA) and a dilatometer are used to determine the polymeric additive burn-out and sintering temperatures. Crystallinity and microstructure of the tape-cast NiO-BZY anode are analyzed after the sintering.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.263-268
• /
• 2005

Nowadays, the vessel size is tending to be bigger and bigger, so port facilities are following this trend, which has been shown inthe competition of Hub-Port among the main ports such as Port of Busan and Port of Shanghai. But there are limited numbers of large container vessels and $70\%$ of the call ships at Busan port are middle and small sized ships which are less than 20,000ton. So we need to consider the handling facilities for these sized ships, but it has disregarded. In this paper, we estimate the optimum level of crane and labor according to vessel's size by container handling cost value reflecting size of vessel; size and number of crane and labor structure.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.173-177
• /
• 2006

From the viewpoint of coastal hydrodynamics, one of the most important effects of global warming is a sea-level rise in coastal areas. In the present study, impacts on port facilities against sea-level rise were investigated. The sea-level rise causes the increase of the water depth, and it generates variations on the wave height, buoyancy, tidal system and nearshore current system and so on. The increase of water depth gives rise to the decrease of crown height of the structure and it causes increase of wave overtopping quantity. It may flood the port zone and its facilities, and may decrease harbor tranquility. It also leads to difficulties on navigation, mooring and loading/unloading at the port. Increase in water depth also causes increase of wave height in surf zone. This high wave makes structures unstable and may cause them to collapse during storm. In addition, increase in buoyant force due to sea-level rise also makes the gravity type structures unstable. Consequently, theses variations due to sea-level rise will cause functional deterioration of port facilities. In order to protect port facilities from the functional deterioration, reinforcement plan is required such as raising the crown height and increase in block weight and so on. Hence proper estimation method for the protection cost is necessary in order to protect port facilities efficiently. Moreover response strategies and integrated coastal zone management plan is required to maintain the function of port facilities. A simple estimation of cost for breakwaters in Korea was performed in the present study.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.6
• /
• pp.348-352
• /
• 2016

In this paper, GaN film was grown on AlN/PSS by hydride vapor phase epitaxy compared with GaN on planar sapphire. Thin AlN layer for buffer layer was deposited on patterned sapphire substrate (PSS) by metal organic chemical vapor deposition. Surface roughness of GaN/AlN on PSS was remarkably decreased from 28.31 to 5.53 nm. Transmittance of GaN/AlN grown on PSS was lower than that of planar sapphire at entire range. XRD spectra of GaN/AlN grown on PSS corresponded the wurzite structure and c-axis oriented. The full width at half maximum (FWHM) values of ${\omega}$-scan X-ray rocking curve (XRC) for GaN/AlN grown on PSS were 196 and 208 arcsec for symmetric (0 0 2) and asymmetric (1 0 2), respectively. FWHM of GaN on AlN/PSS was improved more than 50% because of lateral overgrowth and AlN buffer effect.

• Journal of Conservation Science
• /
• v.28 no.4
• /
• pp.411-416
• /
• 2012

The purpose of this study was to analyze AMS radiocarbon dating, using wiggle match, of a charcoal column excavated from a fired dwelling site (ra-#8) at the Pungnaptoseong earthen wall made in Baekje era. The result of wiggle matching for 6 decadal single-ring samples of the charcoal produced ${\pm}2{\sigma}$ radiocarbon date (95.4% confidence interval) as A.D. 190~280. It indicated that the dwelling site (ra-#8) belonged to the early and middle of the 3rd century. Radiocarbon dating results confirmed the date speculated by archaeologists according to dwelling structure and pottery style.

• Journal of Embryo Transfer
• /
• v.22 no.4
• /
• pp.229-234
• /
• 2007

This study was undertaken to determine the normal appearance of the postpartum uterine involution. Postpartum changes in uterine shape, architecture, echogenicity and diameter were monitored with ultrasonography in 8 Miniature Schnauzer dogs. Vaginal discharge was observed visually during the 3 weeks of postpartum. A large amount of viscous dark green discharge changed progressively to a small amount of transparent discharge. In the uterine shape, the transverse images were crescent or polygonal at the beginning, but became circular after 16 days. At postpartum day 24, the longitudinal images of placental and interplacental sites were similar to each other The echogenicity of uterine structure was clearly distinguishable among the hyperechoic serous membrane, hypochoic myometrium, hyperechoic endometrium, and anechoic uterine contents during the first week postpartum, but afterward the interluminal boundaries and echogenicity became obscure gradually. In addition, the anechoic substance of the endometrial cavity was not observed after postpartum day 28. In the uterine diameter, the diameter of placental sites decreased markedly from 24 mm at the first day postpartum to 13 mm at day 7, and the diameter of interplacental sites decreased from 15 mm at postpartum day 1 to 10 mm at day 7. At postpartum day 65, the uterus (6.4 mm) changed little and had a uniform homogenous echo, and thus it was confirmed that uterine involution was completed at that time in Miniature Schnauzer dogs.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.6
• /
• pp.1373-1383
• /
• 2017

Deduplication is a function to effectively manage data and improve the efficiency of storage space. When the deduplication is applied to the system, it makes it possible to efficiently use the storage space by dividing the stored file into chunks and storing only unique chunk. However, the commercial digital forensic tool do not support the file system analysis, and the original file extracted by the tool can not be executed or opened. Therefore, in this paper, we analyze the process of generating chunks of data for a Windows Server 2012 system that can apply deduplication, and the structure of the resulting file(Chunk Storage). We also analyzed the case where chunks that are not covered in the previous study are compressed. Based on these results, we propose the method to collect deduplicated data and reconstruct the original file for digital forensic investigation.

• Korean Journal of Materials Research
• /
• v.30 no.7
• /
• pp.376-382
• /
• 2020

CeO₂ nanoparticles, employed in a lot of fields due to their excellent oxidation and reduction properties, are synthesized through a solvothermal process, and a high specific surface area is shown by controlling, among various process parameters in the solvothermal process, the type of solvent. The synthesized CeO₂ nanoparticles are about 11~13 nm in the crystallite size and their specific surface area is about 65.38~84.65 ㎡/g, depending on the amount of ethanol contained in the solvent for the solvothermal process; all synthesized CeO₂ nanoparticles shows a fluorite structure. The dispersibility and microstructure of the synthesized CeO₂ nanoparticles are investigated according to the species of dispersant and the pH value of the solution; an improvement in dispersibility is shown with the addition of dispersants and control of the pH. Various dispersing properties appear according to the dispersant species and pH in the solution with the synthesized CeO₂ nanoparticles, indicating that improved dispersing properties in the synthesized CeO₂ nanoparticles can be secured by applying dispersant and pH control simultaneously.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.162-162
• /
• 2000

We have studied magnetic properties of Co/Pt multilayered films which have attracted great interest as high-density magneto-optical (MO) recording media due to their good MO properties. For this study, [Pt(45 )/Co(35 )]$\times$8 films were deposited with a Pt buffer layer of 60 on Si(100) substrate by alternating electron-beam evaporation in a high vacuum and were ion beam mixed by using 80keV Ar+ at 25$0^{\circ}C$. Especially, an external magnetic field was added to help changing magnetic property during ion beam mixing (IBM). The intermixing of Co and Pt layers after IBM was confirmed with Rutherford Backscattering Spectroscopy (RBS) and Transmission Electron Microscopy (TEM). The MO property of the film was measured with magneto-optical Kerr spectrometer and the change of magnetic easy axis in the film plane was observed from Ker loop data. This anomalous result might be correlated with the change of atomic structure due to the intermixing effect.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.382-382
• /
• 2010

$TaO_2$ thin films as gate dielectrics have been proposed to overcome the problems of tunneling current and degradation mobility in achieving a thin equivalent oxide thickness. An extremely thin $SiO_2$ layer is used in order to separate the carrier in MOSFETchannel from the dielectric field fluctuation caused by phonons in the dielectric which decreases the carrier mobility. The electronic and optical properties influenced the device performance to a great extent. The atomic structure of amorphous and crystalline Tantalum oxide ($TaO_2$) gate dielectrics thin film on Si (100) were grown by utilizing atomic layer deposition method was examined using Ta-K edge x-ray absorption spectroscopy. By using X-ray photoelectron spectroscopy and reflection electron energy loss spectroscopy (REELS) the electronic and optical properties was obtained. In this study, the band gap (3.400.1 eV) and the optical properties of $TaO_2$ thin films were obtained from the experimental inelastic scattering cross section of reflection electron energy loss spectroscopy (REELS) spectra. EXAFS spectra show that the ordered bonding of Ta-Ta for c-$TaO_2$ which is not for c-$TaO_2$ thin film. The optical properties' e.g., index refractive (n), extinction coefficient (k) and dielectric function ($\varepsilon$) were obtained from REELS spectra by using QUEELS-$\varepsilon$(k, $\omega$)-REELS software shows good agreement with other results. The energy-dependent behaviors of reflection, absorption or transparency in $TaO_2$ thin films also have been determined from the optical properties.