• 전자공학회논문지A
• /
• 제31A권4호
• /
• pp.21-29
• /
• 1994

Three protocols based on the slotted Aloha technique are proposed for very high-speed optical fiber local area networks using wavelength division multiplexing (WDM) passive star topology and the throughputs and delays are derived. For getting a high probability in successful transmission of control packets determining the transmission of a data packet, we adopt control mini slot groups in these protocols. The retransmission probability is also considered in analysis. Both throughput and delay of three protocols are compared and analyzed by varying the number of control solt groups, the retransmission probability the length of a data packet and the number of channels. The numerical analysis shows that the proposed protocols adopted the control slot groups give the increase of throughput and the decrease of delay.

• 한국기계가공학회지
• /
• 제9권5호
• /
• pp.34-39
• /
• 2010

The characteristic evaluation of an aluminium filler tube for automotive is presented in this paper. The material of filler tube was used AL3003 aluminium. In characteristic evaluation of an aluminium filler, we measured the corrosion, chemical resistance, weight, leak, welding strength, exciting endurance, and the solt spray test etc.. It has been shown that the weight decreased approximately 61% in aluminum filler tube developed comparing with steel filler tube. As the characteristic evaluation on the manufactured aluminium filler it was enough satisfied to use at the automotive filler tube.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.32-35
• /
• 1996

This paper analyzes characteristics of PMLSM using 3 dimensional equivalent magnetic circuit network method (3-D EMC). PMLSM of which the effective electric-airgap is not only very large, but also the width is finite width lateral edges has much leakage flux. Therefore, 2-D analysis method cannot consider it so carefully that 3-D analysis method must required. 3-D EMC which will be used for analysis of PMLSM performs modeling of it including solt and teeth structure, uses the magnetic motive force of stator winding and permanent magnet as source. and calculates magnetic flux density and force considering nonlinear characteristics of materials. we verified analysis validity by comparing simulation results with expermental results.

• 한국해양바이오학회지
• /
• 제15권2호
• /
• pp.90-95
• /
• 2023

This study aimed to develop low-salt seasoned Gim (김) with new functionality to meet the diversification of the export market and consumer demand for Gim, which is one of the four major seafood products in Chungcheongnam-do province. Spirulina, a microalgae containing essential amino acids, vitamins, and minerals, is known to have antioxidant components such as phycocyanin. Therefore, to determine the suitability of spirulina as a seasoning material, we conducted seaweed. It can be used as a substitute for seasoning salt in the development of low-salt seasoned laver with enhanced functionality.

• 한국항공우주학회지
• /
• 제43권9호
• /
• pp.830-837
• /
• 2015

최근 지구를 공전하는 우주잔해물의 개수가 급격하게 증가함에 따라 인공위성과의 충돌 위험성이 높아져 우주잔해물은 우주개발 국가들에게 심각한 문제로 대두되고 있다. 현재 인공위성 충돌 위험성을 감시하고 회피기동 여부를 판단하기 위해서 레이더 및 전자광학 시스템이 사용되고 있다. 그러나 레이저추적 시스템과 같이 보다 정밀한 추적데이터와 연계하여 정밀한 예측 궤도력을 생성할 수 있다면 충돌회피기동 여부의 정확한 판단과 회피기동 계획 수행에 많은 도움을 줄 수 있다. 레이저추적 시스템은 가장 정밀한 거리측정 정보를 제공하기 때문에 기존 예측궤도력 정밀도를 향상시킬 수 있는 대안으로 인식되고 있다. 한국천문연구원은 반사경을 장착한 인공위성 레이저추적, 고출력 레이저를 이용한 우주잔해물 레이저추적 및 적응광학을 이용한 우주물체 영상취득이 가능한 우주물체 레이저추적 시스템을 개발하고 있다. 본 연구에서는 우주물체 레이저추적 시스템에 사용되는 고출력 레이저를 이용한 link budget, 배경잡음에 의한 오경보 및 신호검출 확률 분석을 통해 우주잔해물 레이저추적을 위한 성능분석을 수행하였다.

• 한국통신학회논문지
• /
• 제29권1B호
• /
• pp.1-7
• /
• 2004

최근 인터넷 사용자 수의 증가와 게임, 뉴스, 분산컴퓨팅, 화상회의, 실시간 오디오, 비디오 등의 새로운 응용 트래픽의 등장으로 각 응용의 요구 대역폭이 증가하게 되었다. 이러한 요구에 파장 단위의 전송이 제시되었지만 파장의 한계성이 존재하므로 본 논문에서는 파장 단위의 Time slot을 적용한 빠른 스케줄링 알고리즘을 제안하였다. 이 알고리즘은 일반적인 파장 스위칭 기능과 시간분할전송 기능을 포함한 복합 구조의 광 교환기의 형태를 나타낸다. 제안한 OXC(Optical Cross Connect) 구조의 성능 평가는 패킷의 종류에 따른 구분을 위해 LFS(Limit Frame Size)와 VFS(Variable Frame Size)를 정의하였다. 임계값 이내에서는 두개의 프레임 구조가 유사하게 나타나지만 임계값의 초과 시에는 현저한 차이가 있음을 알 수 있었다. 이러한 구조의 광 교환기는 노드가 증가함에 따라 발생하는 프레임들의 충돌을 감소시킴은 물론 망의 확장성을 보장 할 수 있는 장점을 가지고 있다.

• Journal of Nutrition and Health
• /
• 제29권10호
• /
• pp.1080-1086
• /
• 1996

The purpose of this study was to determine the effects of taurine supplementation on the hepatic lipid peroxidation, activiteis of defense enzymes and membrane stability during rat hepatocarcinogenesis. Hepatocarcinogenesis was induced by Solt & Farber modification. Lipid peroxide contents of carcinogen treated group which was not supplemented with taurine were lower than those of control group. This might be that peroxide is decreased because of the activation of detoxifing enzyme. Glutathione S-transferase(GST) activites of carcinogen treated groups were significantly (p<0.05) increased compared to those of control groups. The GST activities of group supplemented with taurine before treatment of carcinogen and during the all period of experiment were only less increased. In carcinogen treated groups, glutathione peroxidase(GPx) activites of groups supplemented with taurine were higher than those of non supplemented group. By carcinogen treatemtn, glucose 6-phosphatase(G6Pase) activites, index of membrane stability were decreased, but in carcinogen treated groups supplemented with taurine, they were less decreased. These results suggest that taurine supplementation seems to inhibit lipid peroxidation, to change the activities of defense enzymes and to prevent to membrane disintegration during chemically induced hepatocarcinogenesis.

• 대한치과교정학회지
• /
• 제23권2호
• /
• pp.283-294
• /
• 1993

The friction of orthodontic appliances is recogonized to be detrimental to tooth movement. The purpose of this study was to determine the magnitude of frictional force changes between bracket$(018'\times025'\;solt)$ and orthodontic wires(stainless steel, cobalt-chromium, and $\beta-titanium$, $017'\times0.25'$ rectangular) with time. The wire was secured in the bracket slot with a elastomeric ligature. Frictional forces were measured by universal testing machine. The following conclusions were obtained. 1. The frictional forces under dry condition were greater than those in saliva. 2. The frictional forces produced by cobalt-chromium wire were less than those generated by stainless steel and $\beta-titanium$ wire. 3. The frictional forces increased progressively with time, and the amount of increase on first two weeks was greater than on last two weeks. 4. The change of frictional force under dry condition was greater than in artificial saliva.

• 한국지반공학회지:지반
• /
• 제10권3호
• /
• pp.97-110
• /
• 1994

Lining이 타설되기 이전의 unlink 안정 문제를 야기시킬 수 있으며 이 구조물의 역학적 상호작용에 관한 unlined 터널의 3차원적 거동에 관한 원 탄소성 유한요소해석 프로그램을 기초의 극한 지지력, 지반과 터널주컴퓨터 해석 결과를 고찰하여 정방형 unlined 터널은 기초의 극한 지지력을 기초의 형상이나 근입깊이 등에 의해 치하는 터널은 터널의 축방향으로 발생하는 응력의 크기는 정방형 기초 위치와 음력의 종류에 따라 다른 것으로 상호작용의 정도에 따라 다름을 볼 수 있었다.

• 한국농공학회지
• /
• 제34권E호
• /
• pp.30-44
• /
• 1992

A modification of the TEACH-like computer program based on the k-$\varepsilon$ turbulence transport was applied for predicting air mixing patterns and temperature distributions in a rectangular, slot-ventilated enclosure having obstructions ; a rectangular obstacle with heat flux, solid walls separates the passage and the pig pens, and purlins beneath the ceiling. Air flow patterns were calculated for the cases with and without the purlin, extending 300mm beneath the ceiling. Comparisons of prediction data of Randall & Battams(1976) showed air flow pattern predicted well for the case without the purlin. Heat was accumulated at the corner of the left side of the solid wall and the right-upper region of the simulated pigs. However the air distribution pattern was completely different from data for the case with the purlin. The deviation from the observation may be attributed to the difference of the geometric configuation. Exploring the cause of the deviation should be conducted in a further study. Temperature stratification was also observed due to incomplete mixing. The obstruction in the route of the inlet air jet at inlet should be avoided since most of kinetic energy dissipates at the abstacle duet to impingement.