• Title/Summary/Keyword: SOLA

Search Result 100, Processing Time 0.023 seconds

Progression of a persisting mesenchymal hamartoma to intrahepatic cholangiocarcinoma 24 years after the initial diagnosis: A case report

  • Sujin Gang;YoungRok Choi;Sola Lee;Su young Hong;Sanggyun Suh;Eui Soo Han;Suk Kyun Hong;Nam-Joon Yi;Kwang-Woong Lee;Kyung-Suk Suh
    • 한국간담췌외과학회지
    • /
    • 제26권4호
    • /
    • pp.407-411
    • /
    • 2022
  • Mesenchymal hamartoma of the liver (MHL) is a rare benign tumor that often presents in early childhood, and it rarely occurs in adulthood. Aberrant development of the portal tract is a known cause of MHL. Although limited information is available on the natural course of MHL, malignant transformation has been reported in a few cases. Here, we report a case of a 26-year-old female with intrahepatic cholangiocarcinoma secondary to unresected MHL. The patient underwent resection of the hepatic mass, which was diagnosed as MHL at 2 years of age, due to an increase in mass size and a suspicion of malignant transformation during work-up. Histopathology confirmed intrahepatic adenosquamous carcinoma in the background of MHL, with a T2N0M0 pathological stage (stage II). The surgical margin was free from tumor cells. The patient fully recovered postoperatively and started receiving adjuvant chemotherapy. Previous case reports have only reported about the development of undifferentiated embryonal sarcoma or angiosarcoma as malignant transformation of MHL. Cases of other malignancies have not been published; however, it is difficult to rule out the occurrence of various malignancies related to the portal tract when considering the pathogenesis of the disease. To the best of our knowledge, this is the first case report of adenocarcinoma of bile duct origin secondary to MHL. This case report suggests that aggressive surgical management should be considered after the initial diagnosis of MHL.

간수와 불순물을 제거시킨 천일염의 재 결정화 특성 (Recrystallization Characteristics of Solar Salt After Removing of Bittern and Impurities)

  • 이예경;김순동
    • 한국식품영양과학회지
    • /
    • 제37권2호
    • /
    • pp.203-209
    • /
    • 2008
  • 천일염에 함유된 간수와 불순물의 제거와 재결정화 특성을 조사하였다. 간수제거를 위하여 습도 95%로 온도별(30, 40, $50^{\circ}C$)로 처리한 결과 $30^{\circ}C$에서 3주간 둠으로써 간수성분의 86%가 제거되었다. 천일염에 함유된 불순물의 총량은 6.94%(w/w)였으며, 유기태가 5.58%, 무기태가 1.36%이었고, 유기태 불순물은 89%가 가용성이었다. 수용성의 유기태 불순물은 천일염을 $350^{\circ}C$에서 40분간 볶음 처리함으로써 90.14%가 침전, 제거되었으나 50분간 볶음 처리한 경우는 침전량이 감소되었다. 소금의 색상은 볶음 40분까지는 L*값은 감소한 반면 a*, b*값은 증가하였으나 50분간 볶음에서는 이와 반대의 경향을 나타내었다. 간수와 불순물을 제거시킨 천일염을 온도별, 염도별, 소금물의 깊이별로 재결정화시킨 결과 결정의 크기는 온도가 높을수록 커지고 낮아지면 작아지는 경향이었으며 소금물의 깊이가 깊어짐에 따라 컸다. 결정화시간은 온도가 높을수록 염도가 높을수록 단축되었으며 소금결정의 수율은 온도가 높을수록 낮았다. 종합적 기호도는 결정화 온도가 낮고 소금농도가 높은 경우에 높아지는 경향을 보였다.

종교개혁과 근대철학의 형성 (The Protestant Reformation and the Formation of Modern Philosophy)

  • 이태하
    • 철학연구
    • /
    • 제126권
    • /
    • pp.321-343
    • /
    • 2013
  • 종교개혁은 근대철학과는 무관한 듯 보이지만 실상은 근대철학과 밀접한 연관을 갖고 있다. 철학적으로 볼 때, 종교개혁은 두 가지 면에서 근대철학의 형성에 지대한 영향을 미쳤다. 종교개혁의 기본원리인 신적 이성에 대한 신적 의지의 우위를 강조하는 주의주의는 교회의 전승을 무시한 채 '오직 믿음으로'를 강조함으로써 성서와 교리에 대한 자의적 해석을 허용하게 되었다. 이로 인해 극심한 종교적 분쟁이 야기되었고 근대지성인들은 이를 종식시킬 수 있는 방안으로 이른바 보편종교라 할 수 있는 이신론과 자연종교를 추구하게 되었다. 또한 주의주의는 자연에 대한 탐구에 있어 종래의 사변적 탐구를 탈피해 관찰과 실험에 근거한 실험적 탐구에 나서게 함으로써 인간 본성에 대한 실험적 탐구인 실험철학(경험론)의 단초를 제공하였다. 요컨대 종교개혁은 한편에서는 보편종교의 추구를 그리고 다른 한편에서는 실험철학의 출현을 가져왔다고 할 수 있다. 보편종교란 행동과 실천의 근거가 되는 신비적 종교가 아니라 단순히 과학적 탐구를 위한 근거가 되는 세계관에 불과한 것이기에 보편종교를 추구한 철학은 '과학을 위한 철학'이었다. 또한 실험철학은 실험과 관찰을 통해 인간본능을 탐구한 이른바 인간학이란 점에서 '과학에 의한 철학'이었다. 결국 종교개혁은 과거 철학의 안방을 차지하고 있던 종교를 쫓아내고 그 자리에 과학을 앉힌 것이다.

코르셋 타입 하네스의 신체 하중압력 분포 측정 및 가상착의 적용 (Investigation of the body distribution of load pressure and virtual wear design according to the corset type harness)

  • 권미연;최솔아;김주혜
    • 한국의상디자인학회지
    • /
    • 제23권3호
    • /
    • pp.1-10
    • /
    • 2021
  • Harnesses are used in a variety of industries, such as rescue operations, medicine, and entertainment. However, conventional harnesses have problems as they are uncomfortable to wear and causes continuous pain. Therefore, in this study, the load and pressure applied to the body in the flying state when using a conventional harness were measured in real time and the distribution change was observed. Load and pressure were measured using a modified corset harness, a pressure sensor, and a human mannequin to measure the maximum and average pressure on the waist. As a result, it was confirmed that the load concentrated on the waist in the flying state was 104 N, and the pressure was applied to the left and right sides was 800 kPa or greater. The pressure distribution showed a pressure of 3-45 kPa in 73% in all measurable pressures. The results of the load and pressure distribution are presented as basic data for improving the wearability and reducing the discomfort of harnesses in the future, aid in the development of a harnesses that can minimize discomfort for various activities, and increase the concentration on experiential activities. In addition, using the CLO 3D program, which is a 3D virtual wearing system, a harness was put on a virtual model, and the compression level was checked and compared with the actual pressure distribution. As a result of comparing the measured pressure values in the flying state with the clothing pressure wearing the harness in the CLO 3D program, the total pressure value was found to be about 68% of the actual measured value. This helps develop a harness that can minimize discomfort during activities by predicting the load and pressure on the body by first applying new designs to a virtual wearing system during development. These new harness patterns can solve the problems of conventional harnesses.

텍스트 마이닝 기법을 활용한 ECDIS 사고보고서 분석 (Text Mining Analysis Technique on ECDIS Accident Report)

  • 이정석;이보경;조익순
    • 해양환경안전학회지
    • /
    • 제25권4호
    • /
    • pp.405-412
    • /
    • 2019
  • SOLAS에서는 국제 항해에 종사하는 총톤수 500톤 이상의 선박에 대하여 2018년 7월 1일 이후 도래하는 최초 검사까지 ECDIS를 설치해야 한다고 규정하고 있다. 새로운 주요 항해 장비로 ECDIS가 탑재되면서 ECDIS 사용에 관련한 다양한 사고가 발생하고 있다. MAIB, BSU, BEAmer, DMAIB, DSB에서 발행한 12가지의 사고보고서에는 항해사의 운용 미숙과 ECDS 시스템의 사고 원인으로 분석하였고, 사고 원인과 관련된 단어들을 정량적으로 분석하기 위해 R-프로그램을 사용하여 텍스트를 분석하였다. 도출 빈도에 따른 단어의 중요도를 나타내기 위해 텍스트 마이닝 기법인 단어 구름, 단어 연관성, 단어 가중치의 방법을 사용하였다. 단어 구름은 사용된 단어들의 빈도수를 구름 형태로 나타내는 방법으로써 N-gram 모델을 적용하였다. N-gram 모델 중 Uni-gram 분석 결과 ECDIS 단어, Bi-gram 분석 결과는 Safety Contour 단어의 사용 빈도가 가장 많았다. Bi-gram 분석을 기반으로 사고 원인 단어를 항해사와 ECDIS 시스템으로 구분하고, 연관된 단어들을 단어 연관성으로 나타내었다. 마지막으로 항해사와 ECDIS 시스템에 연관된 단어들을 단어 말뭉치로 구성한 후 단어 가중치를 적용하여 연도별 말뭉치 빈도 변화를 분석하였다. 추세선 그래프로 말뭉치 변화 경향을 분석한 결과, 항해사 말뭉치는 최근으로 올수록 감소하였으며 반대로 ECDIS 시스템 말뭉치는 점점 증가함을 나타내었다.

세탁 중 세탁물 중량과 여과 기공 크기에 따른 미세플라스틱 분석 (Analysis of microplastics released from textiles according to filter pore size and fabric weight during washing)

  • 최솔아;권미연;박명자;김주혜
    • 한국의상디자인학회지
    • /
    • 제23권1호
    • /
    • pp.37-45
    • /
    • 2021
  • This study observed the release of microplastics according to washing weights and filtering conditions, measured microplastic generation rates, fiber lengths, and fiber diameters. This study attempted to present data for the development of filters that decrease microplastic generation. For test samples, polyester piled knit fabric (cut-pile) was selected, which currently has the highest amount of consumption in the clothing industry, but can easily cause marine pollution because of its low biodegradability. For test equipment, a drum washer was used and microplastics were collected using two filter pore sizes, 5 ㎛ and 20-25 ㎛. Microplastic fibers weights and lengths were measured. The results of the experiment showed the following: 1) The release of microplastics differed according to the fabric weights and washing process; 2) washing fabric weights showed a differences in the collection amount according to the filter pore size (5 ㎛, 20-25 ㎛); 3) observations of differences in the lengths of the microplastics that occur during the washing process by filter pore size were made. Fibers with shorter lengths appeared with filter pore sizes of 5㎛ in comparison to filter pore sizes of 20-25㎛. The results from this study on microplastic generation by fabric during washing, demonstrated the following conclusions that can be used to reduce the release of microplastics. First, the release of microplastics according to fabric weights and washing courses are affected by physical force. Therefore, it is necessary to reduce the amount of physical force due to water flow, increase the fabric weight, or wash the material in low temperatures. Second, in the manufacturing of washing machines, microplastic filtration can be promoted or legislatation supporting microplastic filtration can be introduced.

Portal vein reconstruction in pediatric liver transplantation using end-to-side jump graft: A case report

  • Jaewon Lee;Nam-Joon Yi;Jae-Yoon Kim;Hyun Hwa Choi;Jiyoung Kim;Sola Lee;Su young Hong;Ung Sik Jin;Seong-Mi Yang;Jeong-Moo Lee;Suk Kyun Hong;YoungRok Choi;Kwang-Woong Lee;Kyung-Suk Suh
    • 한국간담췌외과학회지
    • /
    • 제27권3호
    • /
    • pp.313-316
    • /
    • 2023
  • Attenuated portal vein (PV) flow is challenging in pediatric liver transplantation (LT) because it is unsuitable for classic end-to-end jump graft reconstruction from a small superior mesenteric vein (SMV). We thus introduce a novel technique of an end-to-side jump graft from SMV during pediatric LT using an adult partial liver graft. We successfully performed two cases of end-to-side retropancreatic jump graft using an iliac vein graft for PV reconstruction. One patient was a 2-year-old boy with hepatoblastoma and a Yerdel grade 3 PV thrombosis who underwent split LT. Another patient was an 8-month-old girl who had biliary atresia and PV hypoplasia with stenosis on the confluence level of the SMV; she underwent retransplantation because of graft failure related to PV thrombosis. After native PV was resected at the SMV confluence level, an end-to-side reconstruction was done from the proximal SMV to an interposition iliac vein. The interposition vein graft through posterior to the pancreas was obliquely anastomosed to the graft PV. There was no PV related complication during the follow-up period. Using a jump vascular graft in an end-to-side manner to connect the small native SMV and the large graft PV is a feasible treatment option in pediatric recipients with inadequate portal flow due to thrombosis or hypoplasia of the PV.

대용량 소셜 미디어 감성분석을 위한 반감독 학습 기법 (Semi-supervised learning for sentiment analysis in mass social media)

  • 홍소라;정연오;이지형
    • 한국지능시스템학회논문지
    • /
    • 제24권5호
    • /
    • pp.482-488
    • /
    • 2014
  • 대표적인 소셜 네트워크 서비스(SNS)인 트위터의 내용을 분석하여 자동으로 트윗에 나타난 사용자의 감성을 분석하고자 한다. 기계학습 기법을 사용해서 감성 분석 모델을 생성하기 위해서는 각각의 트윗에 긍정 또는 부정을 나타내는 감성 레이블이 필요하다. 그러나 사람이 모든 트윗에 감성 레이블을 붙이는 것은 비용이 많이 소요되고, 실질적으로 불가능하다. 그래서 본 연구에서는 "감성 레이블이 있는 데이터"와 함께 "감성 레이블이 없는 데이터"도 활용하기 위해서 반감독 학습기법인 self-training 알고리즘을 적용하여 감성분석 모델을 생성한다. Self-training 알고리즘은 "레이블이 있는 데이터"의 레이블이 있는 데이터를 활용하여 "레이블이 없는 데이터"의 레이블을 확정하여 "레이블이 있는 데이터"를 확장하는 방식으로, 분류모델을 점진적으로 개선시키는 방식이다. 그러나 데이터의 레이블이 한번 확정되면 향후 학습에서 계속 사용되므로, 초기의 오류가 계속적으로 학습에 영향을 미치게 된다. 그러므로 조금 더 신중하게 "레이블이 없는 데이터"의 레이블을 결정할 필요가 있다. 본 논문에서는 self-training 알고리즘을 이용하여 보다 높은 정확도의 감성 분석 모델을 생성하기 위하여, self-training 중 "감성 레이블이 없는 데이터"의 레이블을 결정하여 "감성 레이블이 있는 데이터"로 확장하기 위한 3가지 정책을 제시하고, 각각의 성능을 비교 분석한다. 첫 번째 정책은 임계치를 고려하는 것이다. 분류 경계로부터 일정거리 이상 떨어져 있는 데이터를 선택하고자 하는 것이다. 두 번째 정책은 같은 개수의 긍/부정 데이터를 추가하는 것이다. 한쪽 감성에 해당하는 데이터에만 국한된 학습을 하는 것을 방지하기 위한 것이다. 세 번째 정책은 최대 개수를 고려하는 것이다. 한 번에 많은 양의 데이터가 "감성 레이블이 있는 데이터"에 추가되는 것을 방지하고 상위 몇%만 선택하기 위해서, 선택되는 데이터의 개수의 상한선을 정한 것이다. 실험은 긍정과 부정으로 분류되어 있는 트위터 데이터 셋인 Stanford data set에 적용하여 실험하였다. 그 결과 학습된 모델은 "감성 레이블이 있는 데이터" 만을 가지고 모델을 생성한 것보다 감성분석의 성능을 향상 시킬 수 있었고 3가지 정책을 적용한 방법의 효과를 입증하였다.

화물선 소화설비 비치에 대한 연구 (A study on the location of fire fighting appliances in cargo ships)

  • 하원재
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제40권9호
    • /
    • pp.852-858
    • /
    • 2016
  • 화물선 거주구역을 화재로부터 보호하기 위하여 SOLAS에서는 방화구조기준을 도입하여 화염과 연기의 전파속도를 늦출 수 있도록 규정하고 있으며 또한 선원들의 소화훈련을 강제화하고 있다. 이 규정은 선체구조 및 설비에 관한 규정과 인적요소에 관한 규정의 조합으로 화재예방과 화재발생시 효과적인 대응을 하고자 하는 것이다. 인적요소에 관한 규정은 선체구조 및 설비에 관한 규정의 보조적인 규정으로 볼 수 있으며, 현행의 선체구조 및 설비로는 거주구역 화재를 완벽하게 소화할 수 없기 때문에 선원에 의한 소화작업이 필요하며 이에 따른 인적과실을 줄이고 효과적으로 소화작업을 할 수 있도록 소화시스템의 구비와 소화절차의 개선이 필요하다. 소화작업의 기본은 화재가 확산되기 전에 소화준비를 마치고 실제 소화작업을 시작하여야 하는 것이다. 소화작업을 신속히 준비하기 위해서는 소화설비를 가능한 신속하게 이용할 수 있는 장소로 재배치하는 것이 중요하다. 이 연구는 거주구역 내의 화재제어장소를 개방갑판에서 접근할 수 있도록 위치를 변경하고, 이곳에 소방원장구 2조를 같이 비치함으로써 화재시 선원들이 신속하게 소방원장구를 반출할 수 있고 동시에 화재제어장소 내의 화재시스템들을 작동하도록 하여 거주구역에 재진입하는 위험을 제거하여 인적위험을 감소시키고자 하는 것이다. 또한 거주구역의 보호를 위하여 채택하고 있는 보호방식 중 유일하게 직접적인 소화를 할 수 있는 IIC방식을 강제화하여 선원들의 소화작업 중 발생할 수 있는 위험을 줄이고 화재 초기에 화재를 진압할 수 있도록 SOLAS 및 관련 국내법령의 개정을 제언하기 위한 기초연구로 수행되었다.

SCR 폐촉매 침출액으로부터 용매추출법에 의한 유가금속의 추출 (Spent SCR Catalyst Leach Liquor Processed for Valuable Metals Extraction by Solvent Extraction Technique)

  • 아나 벨렌 쿠에바 솔라;전종혁;이진영;판카즈 쿠마 파리;라제쉬 쿠마 죠티
    • 자원리싸이클링
    • /
    • 제29권2호
    • /
    • pp.55-61
    • /
    • 2020
  • 선택적 촉매 환원법(SCR)은 여러 산업에서 질소산화물 (NOx)에 의한 대기오염을 줄일 수 있는 매우 유망한 기술이다. SCR 촉매의 소비는 기술이 발전함에 따라 매년 증가하고 있지만, 촉매의 수명은 제한되어 있으며, 일반적으로 수명이 다해 활성이 떨어진 폐촉매는 재활용 되지 않고 매립되어 처리되고 있다. 현재 가장 널리 사용되는 촉매는 V2O5-WO3/TiO2로 구성되어 있으며, 약 5%wt의 V2O5와 7-10%wt의 WO3를 함유하고 있다. 본 연구는 2차 공급원으로부터 유용 금속을 회수할 수 있는 기술개발에 대한 전세계적인 관심과, 다양한 분야에서의 바나듐 및 텅스텐의 수요에 대한 안정적인 공급을 대비하기 위한 기술개발을 바탕으로 한다. 추출 시간, pH 의존도 및 추출 농도에 대한 연구는 희석제 exxol D80에 추출제로 Aliquat 336을 사용하여 수행되었다. 두 금속의 최적 추출을 위한 조건은 약산성(~5.0) 영역에서 0.5mol/L의 Aliquat 336을 함유한 유기상과 30분 동안 추출 반응을 수행해야 하는 것으로 확인되었다. 또한 counter-McCabe-Thiele 분석으로부터 99%의 바나듐을 제거하기 위해 1단의 단수가 필요하고, 텅스텐의 추출을 위해 2단의 단수가 필요하였으며, 향류추출공정(counter-current simulations) 방식을 통한 이론적 접근의 적합성을 증명하였다.