• The Journal of Dong Guk Oriental Medicine
• /
• v.6 no.2
• /
• pp.135-143
• /
• 1998

This experiment was performed in order to study the effects of Sojadodamgangkitang on the injured tracheal tissue induced $SO_2$ in rats. Healthy adult male rats weighting about 250g were divided into 4 groups-the Normal group, the Control group, the group of Sojadodamgangkitang administration for 5 days after $SO_2$ gas exposure (Sample I), and the group of Sojadodamgangkitang administration for 10 days before and for 5 days after $SO_2$ gas exposure (Sample II). The results were obtained as follows ; 1. In the trachea Control group. the lesion of the ciliated epithelium was severe and the mucus secretion of the respiratory tract was increased iginificantly. 2. In the trachea of Sample I group, the lesion of the ciliated epithelium and the mucus secretion of the respiratory tract were decreased compared with Control group. 3. In the trachea of Sample II group, the lesion of the ciliated epithelium and the mucus secretion of the respiratory tract were decreased compared with Control and Sample I group. According to the above results, Sojadodamgangkitang has significant effect on the injuried tracheal tissue caused by $SO_2$ in rats.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.2
• /
• pp.189-195
• /
• 2020

In this study, the inlet duct and guide vane of the gas floating absorption tower were redesigned to improve the desulfurization efficiency so that the exhaust gas can be uniformly introduced into the absorption tower. In order to reduce the sulfur oxide pollutants among the main sources of air pollutants in industrial boilers, the existing equipment is redesigned and solved. For this purpose, change the exhaust gas, the slurry and recycling the adsorbent to improve the removal efficiency of SOx component in the exhaust gas inside the gas floating absorption tower so as to uniformly contact. And the initial design value and CFD value for the pressure loss from the boiler outlet to the gas floating absorption tower outlet are verified. Also, the velocity distribution of the exhaust gas, the concentration distribution of the recycled adsorbent, the liquid slurry behavior, and the pressure loss were compared. The results confirmed that the desulfurization efficiency was improved because the pressure loss from the boiler outlet to the absorption tower outlet was reduced and the deflection of the exhaust gas was minimized.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.312-315
• /
• 2001

Water-Electrolyzed gas is a mixed gas of the constant volume ratio 2:1 Hydrogen and Oxygen gained from electrolyzed water, and it has better characteristics in the field of economy, efficiency of energy, and environmental intimacy than acetylene gas and LPG used for existing gas welding equipment. So studies of Water-Electrolyzed gas are activity in progress nowadays, and commercially used as a source of thermal energy for gas welding in the industry. The object of this paper is V-I feature of Hydrogen -Oxygen Gas Generator using DC source

• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.88-95
• /
• 2014

In general, odorants are added to fuel gases, such as LPG, LNG and city gas, to prevent gas poisoning, ignition, explosion, or other accident caused by fuel gases, and to enable immediate and easy detection of fuel-gas leakage by emitting an offensive smell. This study describes a study on the performance and exhaust emissions (CO, THC, $CO_2$, $NO_x$, $SO_2$) characteristics of liquefied petroleum gas (LPG) engine using LPG fuel with new sulfur free odorant (K-Petro S-Free). New sulfur free odorant (40 mg/kg) was added to 2 type LPG fuels for summer, and winter and it was used in performance and exhaust emissions, compare to LPG fuel with sulfur containing odorant (EM, ethyl mercaptan). Engine performance using LPG with sulfur free odorant was similar to LPG with sulfur-containing odorant. Exhaust emissions (CO, THC, $CO_2$, $NO_x$) of LPG with sulfur free odorant were also similar characteristics, compare with sulfur containing odorant. Especially, $SO_2$ emission using LPG with K-Petro S-Free odorant was more reduced 83 % than LPG with sulfur containing odorant(EM) at 2000 rpm.

• Geosystem Engineering
• /
• v.21 no.6
• /
• pp.318-325
• /
• 2018

Eight tight sandstone reservoir samples from $He_8$ and $Shan_1$ Formations of the Sulige Gas field were selected to perform gas-water micro-displacement experiment based on authentic sandstone micro-model. The gas pressure-relief experiment was proposed for the first time to simulate the pressure change and gas-water percolation characteristics in the process of gas exploitation. The experiment results show that: (1) In the process of gas accumulation, the gas preferentially flows into the well-connected pores and throats with large radius, but rarely flows into the area without pores and throats. (2) Under sufficient gas drive, the water in pores and throats usually exists in the forms of 'thin water film', 'thick water film', and 'water column', but under insufficient gas drive, gas fails to flow into new pathways in time, so that the reservoirs with large pores and throats are high in water cut. (3) Under the same water saturation, the reservoirs with better petrophysical properties has higher gas recovery factor within unit time. Under the same petrophysical conditions, the reservoirs with lower water saturation show higher gas recovery factor within unit time. The higher the permeability, the stronger the liquid carrying capacity of reservoirs.

• Advances in aircraft and spacecraft science
• /
• v.11 no.2
• /
• pp.195-213
• /
• 2024

This article deals with the changes in flow air properties across an oblique shock wave for a real gas. The flow through is investigated to find a general form for oblique shock waves. The main objective of this work will result in the development of a new numerical algorithm to determine the effect of the stagnation pressure on supersonic flow for thermally and calorically imperfect gases with a molecular dissociation threshold, thus giving a better affinity to the physical behavior of the waves. So, the effects of molecular size and intermolecular attraction forces are used to correct a state equation, emphasizing the determination of the impact of upstream stagnation parameters on oblique shock waves. As results, the specific heat pressure does not remain constant and varies with the temperature and density. At Mach numbers greater than 2.0, the temperature rise considerably, and the density rise is well above, that predicted assuming ideal gas behavior. It is shown that caloric imperfections in air have an appreciable effect on the parameters developed in the processes is considered. Computation of errors between the present model based on real gas theory and a perfect gas model shows that the influence of the thermal and caloric imperfections associated with a real gas is important and can rise up to 16%.

• Particle and aerosol research
• /
• v.8 no.4
• /
• pp.125-132
• /
• 2012

Mercury oxidation in an SCR(selective catalytic reduction) catalyst was tested in this study with the conditions simulating the SCR system in full-scale coal-fired flue gas. A commercially available SCR catalyst was located in a temperature-controlled reactor system, and simulated gas was injected into the reactor. Mercury oxidation efficiency was determined from the difference between inlet and outlet elemental mercury concentrations. A control experiment was carried out with the gas composition of 12% $CO_{2}$, 5% $H_{2}O$, 5% $O_{2}$, 500 ppm $SO_{2}$, 400 ppm NO, 400 ppm $NH_{3}$, 5 ppm HCl, and 20 ${\mu}g/m^{3}$ Hg. Additional tests were conducted with different gas composition from the control condition to investigate the effect of gas composition on mercury oxidation in the SCR catalyst.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.75-78
• /
• 2015

A growing body of evidence has been supporting the existence of so-called "dark molecular gas" (DMG), which is invisible in the most common tracer of molecular gas, i.e., CO rotational emission. DMG is believed to be the main gas component of the intermediate extinction region from Av~0.05-2, roughly corresponding to the self-shielding threshold of $H_2$ and $^{13}CO$. To quantify DMG relative to $H{\small{I}}$ and CO, we are pursuing three observational techniques; $H{\small{I}}$ self-absorption, OH absorption, and THz $C^+$ emission. In this paper, we focus on preliminary results from a CO and OH absorption survey of DMG candidates. Our analysis shows that the OH excitation temperature is close to that of the Galactic continuum background and that OH is a good DMG tracer co-existing with molecular hydrogen in regions without CO. Through systematic "absorption mapping" by the Square Kilometer Array (SKA) and ALMA, we will have unprecedented, comprehensive knowledge of the ISM components including DMG in terms of their temperature and density, which will impact our understanding of galaxy evolution and star formation profoundly.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.2
• /
• pp.108-114
• /
• 1998

Development on the mechanical properties of steel sheet for the automobile body panel is very important in the BAF(Batch annealing furnace) annealing process. Because of the heat treatment method in the BAF, mechanical properties was decided on the heat treatment method of the coil. So, we tested on the development of mechanical properties according to heat treatment method at the annealing furnace using the Ax(H$_2$75%, $N_2$25%) atmospheric gas and the HNx(H$_2$4%, $N_2$96%) atmospheric gas. As a result of several investigations. We confirmed the following characteristics ; mechanical properties was changed under the influence of the annealing cycle, the heat treatment method and the atmospheric gas. And, elongation in the HNx BAF was better than the Ax BAF. Finally, most important thing in the BAF is using of proper annealing cycle in order to get a good quality.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.2 no.1
• /
• pp.60-69
• /
• 1992

Fine $TiO_2$ powders were synthesized from ammonium titanium sulphate which produced from $TiCI_4$, and$(NH_4)_2$ SO. solution. Rutile single crystal were grown by the verneuil method with anatase powders and investigated the property of rutile crystal. The optimun growing conditions were as follows $\cdot$The ratio of hydrogen gas and oxygen gas; 3: 1 $\cdot$Growing temperature: $1900^{\circ}C$ $\cdot$The feeding rate of powders: 10g/hr