• 한국화재소방학회논문지
• /
• 제28권3호
• /
• pp.20-28
• /
• 2014

대향류 메탄/공기 확산화염에서 복사모델이 소화한계에 미치는 영향이 수치적으로 검토되었으며, 수치결과의 검증을 위하여 기초실험이 병행되었다. 소화약제로는 $N_2$와 $CO_2$가 고려되었으며, 다른 정확도를 갖는 복사모델 OTM과 SNB에 따른 소화농도의 차이가 검토되었다. 주요 결과로서, $N_2$가 첨가된 경우, 복사모델의 정확도에 따라 소화농도의 큰 차이가 발생되지 않는다. 그러나 강한 복사효과를 갖는 $CO_2$가 낮은 신장율의 화염에 첨가되었을 때, SNB와 같은 예측 정확도가 높은 복사모델이 고려되어야 한다. 특히 연료에 첨가된 $CO_2$의 경우 복사모델 SNB와 OTM에 의한 소화농도는 차이를 갖게 된다. 따라서 소화농도 예측을 위해서는 수치해의 정확도와 계산시간을 고려한 합리적인 복사모델의 선택이 필수적이라 할 수 있다.

• 항공우주기술
• /
• 제8권1호
• /
• pp.17-25
• /
• 2009

복사전달식에서 흡수 계수의 정확한 계산은 액체 엔진 저부의 단열재 설계의 입력 값으로 사용되는 플룸의 복사 열전달을 예측하는데 매우 중요하다. 이를 위해서 가스 흡수 계수를 직접 모델링 할 수 있는 WNB 모델을 중요 인자의 선정을 위주로 설명하였고, 그 결과를 비교적 정확한 기준 값을 제공하는 SNB의 결과와 비교하였다. 비교 인자들은 총 방사율, 좁은밴드 복사강도 및 총 복사강도이며, 결과적으로 방사율의 경우 주어진 조건에서 3.1% 이내, 총 복사 강도역시 5%이내의 계산결과를 보여 이 모델의 타당성을 확인할 수 있었다. 추가적으로, 액체 엔진의 연소가스들의 성분비를 예측하고 이 조건에 대한 가스모델링 인자를 계산하여 데이터베이스를 구축하였다.

• 한국연소학회지
• /
• 제10권2호
• /
• pp.9-17
• /
• 2005

WSGGM with gray gas regrouping is successfully applied to study the flame structure of opposed flow flames including effect of radiative transfer. The statistical narrow band model is used to obtain the benchmark solutions. Results obtained by using the optically thin model are shown to overestimate the emission and to predict the flame structures inadequately especially for optically thick and low stretch rate flames. Computed results by using the WSGGM with 10 gray gases and SNB model show reasonable agreements with each other, and the required calculation time for the WSGGM is acceptable for engineering applications.

• 대한기계학회논문집B
• /
• 제24권4호
• /
• pp.533-542
• /
• 2000

Analytical experiments to determine the line-of-sight temperature distribution is conducted by using spectral radiation intensities. For this study, fourteen narrow bands of $25cm^{-1}$ interval in $CO_2\;4.3{\mu}m$ band ($2,050cm^{-1}$ to $2375cm^{-1}$) are selected. The applied system is a one-dimensional gas slab filled with 100% $CO_2$ gas at 1 atm. Two types of temperature profile are tested; parabolic and boundary layer types. Three kinds of radiation calculation are used in the iteration procedure for the temperature inversion; LBL(Line by Line), SNB(Statistical Narrow Band) and WNB(WSGGM. based Narrow Band) models. The LBL solution shows perfect agreement while some error of temperature prediction is caused by radiation modeling error when using SNB and WNB models. The inversion result shows that the WNB model may be used more accurately in spectral remote sensing techniques than the traditional SNB model.

• 한국항공우주학회지
• /
• 제31권6호
• /
• pp.88-95
• /
• 2003

임의의 성분비로 혼합되어 있는 CO$_2$와 H$_2$O 혼합가스에 대하여 회색가스가중합법(WSGGM)을 적용하였다. 모델의 타당성을 검증하기 위하여 두 가지 다른 형태의 문제를 고려하였다. 첫 번째는 문제는 일정한 분압하의 균일, 포물선 및 경계층 온도 분포를 갖는 매체에 대한 문제이고, 두 번째는 온도 및 분압이 일정치 않은 매체에 대한 문제이다. 고려된 두가지 형태의 문제들에 대하여 WSGGM을 이용한 결과는 기준이 되는 좁은밴드 모델(SNB)의 결과와 잘 일치하고 있는 것을 확인하였다. 본 연구에서 제안된 모델과 데이터베이스는 연소가스에 의한 복사열전달의 해석에 유용하게 사용될 수 있을 것이다.

• International Journal of Aeronautical and Space Sciences
• /
• 제3권1호
• /
• pp.30-38
• /
• 2002

In multi-dimensional systems, various solution schemes for radiative transfer are suggested but the applicabilities and accuracies of these schemes have not yet fully tested due to the lack of reference solutions especially for nongray gases. In this paper we present some precise radiative transfer solutions for a black walled 3-dimensional cylindrical system filled with nongray gases having uniform temperature and concentration. The ray-tracing method with the $T_N$ quadrature set and the SNB model are used to obtain the radiative transfer solutions by the nongray gases. The solutions presented in this paper are proved to be quite accurate and can be regarded as the reference solutions for the radiative transfer by nongray gases.

• 시스템엔지니어링학술지
• /
• 제15권2호
• /
• pp.79-86
• /
• 2019

Among the government-sponsored projects supported by Ministry of SMEs and Startups(MSS), the financial support of the Consulting Research Institutes of our university is scheduled to be ended this year. In this regard, this study is to develop a profit model for R&D center of Consulting Research Institute that can cultivate the financial independence of R&D center of Consulting Research Institutes and foster technology convergence consulting manpower to strengthen the competitiveness of SMEs in preparation for the Fourth Industrial Revolution. The profit model were derived from the current status of consulting industry and similar organizations, the current status of consulting graduate R&D centers, case studies of other universities, and focus group interviews. In order to select three high profit models and commercialize them, BMC (Biz Model Canvas) was used and business feasibility was examined. Therefore, three profit model of R&D center of Consulting Research Institute are: First, SCB (SME's Consulting Business: Total Solution Provider for SMEs through Technology Convergence Consulting), Second, SNB (SME's Network Business: Experts connection in Consulting Graduate School for Solving Problems and Problems of SMEs / Industry Consolidation) And third, SM (Sustainable Management: Financial independence through structural improvement of Consulting Research Institute), and the road-map was established. As an implementation plan, the company intends to seek financial independence by developing a profit model for R&D center of Consulting Research Institutes and by establishing business goals and strategies, manpower operation plan, organization, and investment plan for three years.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1493-1498
• /
• 2004

WSGGM with gray gas regrouping is successfully applied to study the flame structure of counter flow flames including effect of radiative transfer. The statistical narrow band model is used to obtain the benchmark solutions. Results obtained by using the optically thin model are shown to overestimate the emission and to predict the flame structures inadequately especially for optically thick and low stretch rate flames. Computed results by using the WSGGM with 10 gray gases and SNB model show reasonable agreements with each other, and the required calculation time for the WSGGM is acceptable for engineering applications.

• 대한기계학회논문집B
• /
• 제26권6호
• /
• pp.859-867
• /
• 2002

Radiative transfer in energy systems such as furnaces, combustors, boilers and high temperature machineries is a significant mode of heat transfer. Although there are many solution schemes suggested for analysis of radiative transfer in multi-dimensional systems, the applicabilities and accuracies of these schemes have not fully tested for nongray gases. Especially reference data for enclosures of non-orthogonal shapes are not yet enough. In this paper we present some precise radiative transfer solutions for a black walled 3-dimensional cylindrical system filled with nongray gases. The SNB(statistical narrow band) model and the ray-tracing method with the T$_{N}$ quadrature set are used for finding nongray solutions. Although the solution method used in this study is not suitable for engineering purposes, the resulting solutions are proved to be quite accurate and can be regarded as the exact solutions and the results presented in this paper can be used in developing various solution schemes fur radiative transfer by real gas mixtures.s.

• 대한기계학회논문집B
• /
• 제30권2호
• /
• pp.101-109
• /
• 2006

The narrow band-averaged transmissivity of $CO_2-H_2O$ mixtures is expressed by multiplying the transmissivities of $CO_2\;and\;H_2O$. Applying the multiplication property of narrow band transmissivities for gas mixtures of $CO_2-H_2O$ of the narrow band based WSGGM (weighted sum of gray gases model), the number of gray gases, required for accurate representation of the absorption characteristics by using the narrow band based WSGGM, is significantly increased. To reduce the computational loads by reducing the number of gray gases, we propose a gray gas regrouping process where the gray gases used for .the WSGGM are regrouped into a specified number of groups according to the magnitudes of absorption coefficients. To evaluate the proposed WSGGM for gas mixtures, the radiative transfer problems through 3-dimensional gas media are considered. The radiative source terms and the radiative heat fluxes obtained by using the proposed method are fairly well compared to previous results obtained by using the SNB model and other models. The regrouping technique results in an excellent computational efficiency with minor loss of accuracy.