• Resources Recycling
• /
• v.7 no.5
• /
• pp.46-51
• /
• 1998

A study has been on the recovery of nitric acid and valuable metals such as Fe, Cu, Sn, Pb, from spent nitric etching solutions. The effects of extractant of extractant type, concentrations, phase raios and selectivity from Fe, Cu, Sn, Pb on nitric acid extraction were studied. The results showed that TBP as an extractant for recovering of nitric acid was more effective than Alamine336, and the optimal concentration of TBP was found to be 60~70% of organic phase. Also, the nitric acid were only extracted by TBP from the spent etching solutions and the heavy metals such as Fe, Cu, Sn, Pb were not extracted above 0.1N nitric acid in spent etching solutions, From the analysis of McCabe-Thiele diagram, the extraction of 95% nitric acid is attained at a ratio of O/A=3 with five stages by 60% TBP and the stripping of 98% nitric acid from 80 g/l nitric acid in organic phase is attained at a ratio of O/A=1 with four stages by distilled water.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.3
• /
• pp.317-326
• /
• 2011

Today there is a growing range of applications for Concrete-Filled Steel Tube (CFT) member because of its superior performance. Ductility estimation test of concrete-filled seismic resistant steel tubular columns, subjected to axial and cyclic lateral load, was carried out in this study. Seismic resistant steel tubes are manufactured using SN400B plates by a two-seam welding at center of the column width for cold press-formed shape plates of two pieces. A total of eight specimens were manufactured and tested with the parameters of width-thickness ratio of steel tubular column, axial load ratio, and loading conditions to act axial and cyclic lateral load two dynamic actuators were used. From test results, flexural strength, deformation capacity, energy dissipation capacity, and ductility behavior of columns were analyzed.

• Journal of the korean society of oceanography
• /
• v.33 no.3
• /
• pp.90-99
• /
• 1998

Butyltin and phenyltin residues were quantified in seawater and biota of the Chinhae Bay System, Korea in 1995. Butyltin compounds were detected in all seawater and biota samples, whereas phenyltin compounds were found only in the biota samples. Tributyltin (TBT) concentrations in seawater ranged from < 8-35 ng Sn/l. Tributyltin concentrations in Crassostyea gigas and Thais clavigera ranged from 95-885 and 23-414 ng Sn/g, respectively, Triphenyltin(TPhT) concentrations in each species ranged 155-678 and 46-785 ng Sn/g, respectively. Spatial distribution of TBT was closely related to boating and dry-docking activities. However, spatial distribution of TPhT was not consistent with that of TBT. The biological concentration factor for TBT in C. gigas was about 25000 that is four times greater than that of T. clavigera. Butyl- to phenyltin concentration ratio was greater than one in C. gigas, but that in T. clavigera was less than one. Major tissues of C. gigas also showed different accumulation patterns for butyl- and phenyltin compounds. Furthermore, 19 and 28% of total body burdens of TBT and TPhT were found in gonadal mass of C. gigas just prior to spawning.

• Applied Science and Convergence Technology
• /
• v.25 no.4
• /
• pp.73-76
• /
• 2016

Multi-layer films of $SiN_x/SiO_x$/InSnO with anti-reflective effect were grown by new-concept plasma enhanced chemical vapor deposition system (PECVD) with hybrid plasma source (HPS). Anti-reflective effect of $SiN_x/SiO_x$/InSnO was investigated as a function of ratio of $SiN_x$ and $SiO_x$ thickness. Multi-layers deposited by PECVD with HPS represents the enhancement of anti-reflective effect with high transmittance, comparing to the layers by conventional radio frequency (RF) sputtering system. This change is strongly related to the optical and physical properties of each layer, such as refractive index, composition, film density, and surface roughness depending on the deposition system.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.1
• /
• pp.44-52
• /
• 2006

New organotin(IV) derivatives with general formulae R_2SnL_2 and R_3SnL, where R = methyl, n-butyl, n-octyl and phenyl and HL is either 3-[N-(4-nitrophenyl)amido]-propenoic acid or 3-[N-(4-nitrophenyl)amido] propanoic acid have been synthesized in 1 : 2 and 1 : 1 molar ratio by different methods. The FTIR spectra clearly demonstrated that the organotin(IV) moieties react with [O,O] atoms of the ligands. The bonding and coordination behavior in these complexes are discussed on the basis of multinuclear (^1H,\,^{13}C,\,^{119}Sn) NMR and mass spectrometric studies. Antibacterial, and antifungal screening tests were performed for these compounds and reported here. These values were compared to those of the precursors and it was found that diorganotin(IV) complexes exhibit less activity as compared to triorganotin(IV) complexes . LD_{50} data were obtained by Brine Shrimp assay method. Insecticidal activity was performed for selective compounds by contact toxicity method.

• Korean Journal of Materials Research
• /
• v.24 no.1
• /
• pp.43-47
• /
• 2014

NiO-doped hibonite pigments were synthesized by the solid state method to get stabilized blue color pigment in both oxidation and reduction atmospheres. Optimum substitution condition with NiO for hibonite blue pigment was investigated. Experimental results were comparable to those of previous cobalt-minimization studies performed with other phosphate- or oxide-based cobalt-containing ceramic pigments (having olivine ($Co_2SiO_4$), spinel ($CoAl_2O_4$), or with co-doped willemite ($(Co,Zn)_2SiO_4$) structures). Composition was designed varying the NiO molar ratio increasing with $SnO_2$. The optimum substitution content is 0.93 mole NiO with 0.75mole $SnO_2$. The characteristics of the synthesized pigment were analyzed by XRD, Raman spectroscopy, SEM, and UV-vis. Synthesized pigment was applied to a lime-barium glaze with 10 wt% each and fired at an oxidation atmosphere of $1250^{\circ}C/1h$ and a reducing atmosphere $1240^{\circ}C/1h$. Blue color was obtained with $L^*a^*b^*$ values at 43.39, -6.78, -18.20 under a reducing atmosphere and 41.66, -6.36, -14.7 under and oxidation atmosphere, respectively.

• The Korean Journal of Food And Nutrition
• /
• v.7 no.4
• /
• pp.345-352
• /
• 1994

High protein beverage of cow-soy milk was prepared by mixing the soymilk and commercial homogenized cow milk in the various ratios. Effect of heat treatment, pH and addition of calcium and sucrose was studied on the water-soluble nitrogen of cow-soy milk The heat-treated soymilk at 10$0^{\circ}C$ were centrifuged at the range of 830~29,900xg for 30 min and 11,200xg was found to be proper for determination of the degree of protein denaturation by centrifugal method. When soymilk was heated at 70~10$0^{\circ}C$ for 30~240 min, soluble nitrogen (QA SN) in supernatant of protein was decreased to 78.0~56.8% due to protein denaturation. Most of heat denaturation of protein was found to be occurred during Initial heating 10$0^{\circ}C$ for all mixed cow-soy milk. The sedimentation of SN was maximum at pH 4.0 In the range of pH 3~8. Addition of sucrose affected little on oASN while calcium addition reduced %SN significantly to approx. 55% for soymilk(100%). The effect of Ca was less as the ratio of cow milk increased.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.8
• /
• pp.874-880
• /
• 1997

Various classes of phospholipids were investigated for the structural determination of fatty acyl groups by fast atom bombardment tandem mass spectrometry (FAB-MS/MS). Phospholipids were desorbed by FAB as molecules chelated with sodium ion (or ions). Collision-induced dissociation (CID) of intact sodium adduct molecular ions ([M+Na]+, [M-H+2Na]+ or [M+Na-2H]-) produced a series of homologous fragment ions via the charge-remote fragmentation along the fatty acid chains. These ions were found useful to locate the double bond positions even for the polyunsaturated fatty acid chains. The regiospecificity of the acyl chain linkages in phosphatidylcholine (PC) could also be determined based on the ratio of relative abundance of the product ions (i.e., [M+Na-85-R2COOH]+ vs [M+Na-85-R1COOH]+) in CID-MS/MS of [M+Na]+. These are generated by the loss of fatty acyl groups at sn-1 and sn-2, respectively, together with the choline group. In all the phospholipid compounds investigated, loss of the fatty acid at the sn-2 position was dominant. The present method was applied to the structural determination of molecular species of phosphatidylglycerols (PG) isolated from cyanobacterium Synechocystis sp. PCC 6803.

• IE interfaces
• /
• v.22 no.1
• /
• pp.95-103
• /
• 2009

During the past few years, design of experiments (DOE) has been gaining acceptance in the telecommunications research community as a mean for designing and analyzing experiments economically and efficiently. In addition, the need for introducing a systematic robust design methodology (i.e., one of the most popular DOE methodologies) to network simulations has been increasing. In this paper, we present an architecture of voice over IP (VoIP) application and the E-Model for calculating the perceived quality of service (QoS). Then, we apply the Taguchi robust design methodology to optimize the perceived QoS of VoIP application, and describe the detailed step-by-step procedures. We have used ns-2 simulator to collect experimental data in which the SN ratio, a robustness measure, is analyzed to determine an optimal design condition. The analysis shows that "initial delay time in playout buffer" is a major control factor for ensuring robust behaviors of the perceived QoS of VoIP. Finally, we verify the proposed optimal design condition using a confirmation experiment.

• Journal of Korean Society for Quality Management
• /
• v.45 no.2
• /
• pp.293-306
• /
• 2017

Purpose: In this study, an optimal design level of influencing factors on semiconductor polishing process was determined to minimize flexion of both sides on wafers. Methods: First, significant interactions are determined by the stepwise regression method. ANOVA analysis on SN ratio and mean of dependent variable are performed to draw mean adjustment factors. In addition, the optimal levels of mean adjustment factors are decided by comparing means of each level of mean adjustment factors. Results: As a result of ANOVA, a mean adjustment factor was determined as a width of formed flexion on the plate. The mean of the difference has the nearest to 0 in the case when the width of formed flexion has level 2 (4mm). Conclusion: Optimal design levels of semiconductor polishing process are determined as follows; (i) load applied to the wafer carrier has a level 1 (3psi), (ii) load applied to the wafer has a level 1(3psi), (iii) the amount of slurry supplied during polishing has a level 3 (300 co/min), (iv) the width of formed flexion on the plate has level 2 (4mm).