• 보건교육건강증진학회지
• /
• 제20권4호
• /
• pp.51-65
• /
• 2003

Objectives： To examine the regional mortality differences in The Republic of Korea according to geographic location. Methods： All 232 administrative districts of the Republic of Korea in 1998 were studied according to their geographic locations by dividing each district into three categories； "metropolis," "urban," and "rural". Crude mortality rates for doth sexes from total deaths as well as the three major causes of death in Korea (cardiovascular disease, cancer, and external causes) were calculated with raw data from the "1998 report on the causes of death statistics" and resident registration data. Standardized mortality ratios (SMR) were calculated using the indirect standardization method. Poisson regression analyses were performed to examine the effects of geographic locations on the risk of death. To correct for the socioeconomic differences of each region, the percentage of old ($\geq$ 65 years old) population, the number of privately owned cars per 100 population, and per capita manufacturing production industries were included in the model. Results： Most SMRs were the lowest in the metropolis and the highest in the rural areas. These differences were more prominent in men and in deaths from external causes. In deaths from cancer in women, the rural region showed the lowest SMR. In Poisson regression analysis after correcting for regional socioeconomic differences, the risk of death from all causes significantly increased in both urban (OR＝1.111) and rural (OR＝1.100) regions, except for rural women, compared to the metropolis region. In men, the rural region showed higher risk (OR＝1.180) than the urban region (OR＝1.l51). For cardiovascular disease and cancer, significant differences were not found between geographic locations, except in urban women for cardiovascular disease (OR＝1.151) and in rural women for cancer (OR＝0.887), compared to metropolis women. In deaths from external causes, the risk ratios significantly increased in both urban and rural regions and an increasing tendency from the metropolis to the rural region was clearly observed in both sexes. Conclusions： Regional mortality differences according to geographic location exist in The Republic of Korea and further research and policy approaches to reduce these differences are needed. to reduce these differences are needed.

• 한국압력기기공학회 논문집
• /
• 제20권1호
• /
• pp.49-55
• /
• 2024

Stainless 630 (or 17-4PH) is a precipitation-hardening martensitic stainless steel that has excellent mechanical properties and corrosion resistance. These characteristics make the STS630 to be used as a consisting material for various components such as spider, pin, spring, and spring retainer, of the control rod drive mechanism (CRDM) in pressurized water reactors (PWRs). In general, it is well known that the oxide layer of stainless steel consists of a duplex layer, a compact inner layer of FeCr₂O₄ spinel, and a coarse-grained outer layer of Fe₃O₄ spinel in PWR primary coolant condition. However, the characteristics of the oxide layer can be sensitively influenced by various water chemistry conditions such as temperature, dissolved oxygen, dissolved hydrogen, pH, pH adjuster type, and exposure time. In this work, we investigate the corrosion properties of the STS630 as a function of coolant temperature in an NH3 alkaline solution for its boron-free application in a small modular reactor, to confirm the feasibility for usage as a boron-free SMR structural material. As a result, oxide layer of corroded STS630 is consist of double-layer oxides consisting of a Cr-rich dense inner oxide and a Fe-rich polyhedral outer particles like as that in commercial PWR primary coolant. The corrosion rate of STS630 increases with increase in test time and temperature and the corrosion rate-time model equation was developed based on experimental data. Overall, it is expected that the results in this study provides useful data for the corrosion behavior of STS630 in alkaline environments, contributing to the development of selecting suitable materials for SMRs.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.803-811
• /
• 2024

Nuclear accidents such as Fukushima Daiichi have highlighted the potential of passive safety systems to replace or complement active safety systems as part of the overall prevention and/or mitigation strategies. In addition, passive systems are key features of Small Modular Reactors (SMRs), for which they are becoming almost unavoidable and are part of the basic design of many reactors available in today's nuclear market. Nevertheless, their potential to significantly increase the safety of nuclear power plants still needs to be strengthened, in particular the ability of computer codes to determine their performance and reliability in industrial applications and support the safety demonstration. The PASTELS project (September 2020-February 2024), funded by the European Commission "Euratom H2020" programme, is devoted to the study of passive systems relying on natural circulation. The project focuses on two types, namely the SAfety COndenser (SACO) for the evacuation of the core residual power and the Containment Wall Condenser (CWC) for the reduction of heat and pressure in the containment vessel in case of accident. A specific design for each of these systems is being investigated in the project. Firstly, a straight vertical pool type of SACO has been implemented on the Framatome's PKL loop at Erlangen. It represents a tube bundle type heat exchanger that transfers heat from the secondary circuit to the water pool in which it is immersed by condensing the vapour generated in the steam generator. Secondly, the project relies on the CWC installed on the PASI test loop at LUT University in Finland. This facility reproduces the thermal-hydraulic behaviour of a Passive Containment Cooling System (PCCS) mainly composed of a CWC, a heat exchanger in the containment vessel connected to a water tank at atmospheric pressure outside the vessel which represents the ultimate heat sink. Several activities are carried out within the framework of the project. Different tests are conducted on these integral test facilities to produce new and relevant experimental data allowing to better characterize the physical behaviours and the performances of these systems for various thermo-hydraulic conditions. These test programmes are simulated by different codes acting at different scales, mainly system and CFD codes. New "system/CFD" coupling approaches are also considered to evaluate their potential to benefit both from the accuracy of CFD in regions where local 3D effects are dominant and system codes whose computational speed, robustness and general level of physical validation are particularly appreciated in industrial studies. In parallel, the project includes the study of single and two-phase natural circulation loops through a bibliographical study and the simulations of the PERSEO and HERO-2 experimental facilities. After a synthetic presentation of the project and its objectives, this article provides the reader with findings related to the physical analysis of the test results obtained on the PKL and PASI installations as well an overall evaluation of the capability of the different numerical tools to simulate passive systems.