• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.666-668
• /
• 2016

Salt and pepper noise generally occurs due to errors in the transmission channel or sensors and it lowers the resolution of the image and causes visual errors. To remove this salt and pepper noise, SMF(standard median filter), which represents simple algorithm and excellent noise removal performance, is widely used. However preservation characteristics in the pitch areas of the image is rather lacking. Therefore to effectively restore images damaged by salt and pepper noise, the study suggested a multiple filter that applies filters differently according to size by applying noise density threshold value of local mask on noise signal, while preserving non-noise signal.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.409-411
• /
• 2016

Salt and pepper noise is caused by various causes such as camera malfunction, storage media memory error, and transmission channel error. Representative filters to remove salt and pepper noise include SMF(standard median filter), CWMF(center weighted median filter), and AMF(adaptive median filter). However previous filters have inadequate noise removal characteristics in high density salt-and-pepper noise environment. Therefore the study suggested a composite filter which, through noise evaluation, preserves original pixels when the central pixel is non-noise, and uses spatial weighted value mask and median when there is noise.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9B
• /
• pp.1518-1526
• /
• 2000

This paper proposes an optical transmission link design method based on an optimum compensation scheme using dispersion compensating fiber (DCF), so that high-speed long-distance optical transmission would be possible over the conventional standard single mode fiber (SMF) link. The proposed design method provides the maximized transmission distances according to the signal speeds, where the amplifier spacing and repeater spacing are optimized wit respect to self-phase modulation(SPM) due to fiber nonlinearity and amplified spontaneous emission (ASE) noises caused by optical amplifies. It is also shown that there exists an optimum input signal power range balancing the effects of ASE noise and SPM for the given amplifier spacing and repeater spacing.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.9
• /
• pp.2173-2179
• /
• 2015

In digital era image processing has been utilized in a variety of media such as TV, camera and smart phone. Typically salt and pepper noise are generated by various causes during the analysis, identification, and processing of image data. Principal filters such as SMF, CWMF, and AMF have been used to remove these noise. But the existing filters fall short of edge preservation and noise elimination in high noise densities. Thus, a processing algorithm, on which the size of deformable mask varies depending on the noise density, is proposed to remove salt and pepper noise effectively in this study. The performance of the proposed method was evaluated compared with the existing methods using PSNR.

• Journal of information and communication convergence engineering
• /
• v.11 no.1
• /
• pp.1-6
• /
• 2013

Suppressing or mitigating signal distortion due to group velocity dispersion and optical Kerr effects is necessary in ultra-high speed and long-haul wavelength division multiplexing (WDM) transmission systems. Dispersion management (DM), optical phase conjugation (OPC), and the combination of these two are promising techniques to compensate for signal distortion. In this paper, to implement a flexible optical WDM network, a new optical link configuration with a randomly distributed single-mode fiber (SMF) length and fixed residual dispersion per span in the combination of DM and OPC is proposed and investigated. The simulation results show that the best net residual dispersion (NRD) in the proposed optical links is +10 ps/nm, which is independent of pre- and postcompensation. The effective launch power of the WDM channel is increased more in the optical links with NRD = +10 ps/nm controlled by only precompensation. Furthermore, the system performance difference between the proposed optical link configuration with the best NRD and the conventional optical link with uniform distribution of the SMF length had little significance. Consequently, it is confirmed that the proposed optical link configuration with the best NRD is effective and useful for implementing a reconfigurable long-haul WDM network.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.711-713
• /
• 2017

Fiber Brag grating sensors were written in standard Ge-doped telecom optical fiber (Corning SMF-28) using an 800nm femtosecond laser and a phase mask. It were exposed to gamma-radiation up to a dose of 100 kGy to evaluate the radiation effect. The fs-FBG-2 sensor showed incomplete optical characteristics during irradiation, but the fs-FBG-1 sensor showed excellent radiation resistance with Bragg wavelength shift(BWS) of less than 10pm at a dose of 100 kGy.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.780-783
• /
• 2010

Net residual dispersion (NRD) available to transmit RZ formats with different 24 wavelength as a function of duty cycles of RZ format and residual dispersion per span (RDPS) is induced by controlling precompensation only in 960 km optical transmission links of single mode fiber (SMF) with inline dispersion management (DM) for compensating of accumulated dispersion. It is confirmed that effective NRD range for different 24 wavelengths is gradually broadening as RDPS is more smaller, and as duty cycle of RZ format is more larger in the same RDPS.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.252-255
• /
• 2014

Image treatment is becoming mainstream as the demand for image restoration has drastically increased in the digital era. But in the process of acquiring, transmitting and treating video data, the salt and pepper noise damages the image. One of the major methods used for restoring images are SMF(standard median filter), CWMF(center weighted median filter) and SWMF(switching weighted median filter), but these filters all leave a bit to be desired in terms of removing noise and preserving edge. Therefore, a transformed median filter is suggested through the algorithm presented for the restoration of damaged images.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.798-800
• /
• 2014

In recent years, according to the improvement of Digital image technology have been recently developed most of communication technology from multimedia communication service as well as image data transmission. But In the process of storing and transmitting noise is still generated in noise and the image degrades rapidly quality of a lot of image impulse noise. To eliminate this noise, SMF, CWMF, SWMF etc. The filters have been proposed to interfere with the noise characteristics of the filter are somewhat sufficient. Therefore, in this paper, in order to remove impulse noise is proposed a modified median filter. And impulse noise removal algorithms to confirm the existed PSNR(peak signal to noise ratio) from using conventional methods were compared.

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.2
• /
• pp.85-93
• /
• 2008

This study summarizes the results of a research project aimed at investigating the inelastic rotation capacity of beam-column joints of reinforced concrete special moment frames. All of the test specimens were classified as special moment frame (SMF), based on the design and detailing requirements of the ACI 318-02 provisions. The acceptance criteria, originally defined for steel moment frame connections in the 1997 edition of the AISC Seismic provisions, were used to evaluate the beam-column joints of the reinforced concrete moment frames. A total of 39 test specimens were examined in detail. Most of the joints that satisfy the design requirements for special moment frame structures were found to be ductile up to a plastic rotation of 3% without any major degradation in strength. This is mainly due to the stringent ACI 318-02 requirements for special moment frame joints. The presence of transverse beams increases confinement and shear resistance of joints, which results in better performance than for joints without transverse beams. All of the SMF connections that satisfy the ACI 318-02 limitations on joint shear stress turned out to meet the acceptance criteria.