• Title/Summary/Keyword: SM5-1

Search Result 717, Processing Time 0.023 seconds

Partial Oxidation of Methane to Syngas over M(10)-Ni(5)/SBA-15(M=Ce, Nd, Sm) Catalysts (M(10)-Ni(5)/SBA-15(M=Ce, Nd, Sm) 촉매상에서 합성가스 제조를 위한 메탄의 부분산화반응)

  • Seo, Ho Joon;Kim, Yong Sung
    • Applied Chemistry for Engineering
    • /
    • v.28 no.6
    • /
    • pp.720-725
    • /
    • 2017
  • M(10)-Ni(5)/SBA-15(M=Ce, Nd, Sm) catalysts were prepared for the partial oxidation of methane (POM) to syngas. The catalysts were characterized by BET, TEM, and XPS. The BET-specific surface area and average pore size for M(10)-Ni(5)/SBA-15(M=Ce, Nd, Sm) were 538.8, 504.3, and $447.3m^2/g$ and 6.4, 6.8, and 7.1 nm, respectively. TEM results showed that the mesoporous hexagonol structure was formed for SBA-15, while the homogeneous dispersion of Ni and Ce particles on the surface was formed for Ce(10)-Ni(5)/SBA-15 caused by the confinment effect of SBA-15. XPS data confirmed that $Ce^{4+}$ and $Ce^{3+}$ on the surface catalyst have two oxidation states due to the lattice oxygen species ($O^{2-}$, $O^-$). The yields of POM to syngas over Ce(10)-Ni(5)/SBA-15 were 52.9% $H_2$ and 21.7% CO at 1 atm, 973 K, $CH_4/O_2=2$, $GHSV=1.08{\times}10^5mL/g_{cat.}{\cdot}h$, and these values were kept constant even after 75 h on streams. The same tendency of syngas yields was observed for M(10)-Ni(5)/SBA-15(M=Ce, Nd, Sm). These results confirm that the redox reaction of promoters including Ce, Nd, and Sm enhanced the stability and yield of catalysts.

A study on optimum of cutting ability with change of tool rake angles (바이트 인선각의 변화에 따른 절삭성의 최적화 방안에 관한 연구)

  • 염성하;오재응;현청남
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.12 no.5
    • /
    • pp.1043-1054
    • /
    • 1988
  • The optimum cutting condition of rake angle in turning was investigated in SM45C and SM20C. Results of experiments in SM45C and SM20C are as follow. Specific cutting resistance became higher as the depth of cutting, feed or cutting velocity decreases at same rake angle and resistance became low value at 20.deg.(SM45C), 10.deg.(SM20C). The optimum cutting condition for SM45C is depth of cutting 0.7mm, rake angle 30.deg., cutting velocity 200mm/min, feed 0.1mm/rev, and for SM20C is depth of cut 0.5mm, rake angle 10.deg., cutting velocity 150mm/min, feed 0.1mm/rev.The rake angle for good roughness is 15.deg for SM45C, and that for SM20C is 25.deg. The roughness is influenced by feed and it has the lowest value at 0.1mm/rev and the cutting condition is closely related with the change of cutting velocity and feed.

Microstructure and Magnetic Properties of Rapidly Solidified Nd-Fe(-Co) and Sm-Co(-Fe) Laves Compounds (급속냉각된 Nd-Fe(-Co)와 Sm-Co(-Fe)계 Laves 화합물의 미세조직과 자기특성)

  • 이우영;최승덕;양충진
    • Journal of the Korean Magnetics Society
    • /
    • v.1 no.1
    • /
    • pp.17-24
    • /
    • 1991
  • Laves phases of $NdFe_2$, $Nd{(Fe_{0.5})}_2$, $SmCo_2$ and $Sm{(Fe_{0.5}Co_{0.5})}_2$ stoichiometry were prepared using a rapid solidification technology. Low temperature magnetic properties show ferromagnetic behaviors for the $Nd{(Fe_{0.5}Co_{0.5})}_2$, $SmCo_2$ and $Sm{(Fe_{0.5}Co_{0.5})}_2$Nd(Feo,Coo,) Laves compounds while a sort of spin reorientation has been suggested for the supposed composition of $NdFe_2$ alloy. This rapidly solidified $NdFe_2$ alloy is believed to consist of metastable rhombohedral $NdFe_7$ phase plus fine particles of Nd-rich phase. Some evidence of phase transition from the mixture of unstable $NdFe_7$ compound plus Nd-rich to $Nd_2Fe_{17}$ plus Fe-Nd-O phase was obtained after annealing the $NdFe_2$, alloy. The pseudo-binary Laves compound, $Sm{(Fe_{0.5}Co_{0.5})}_2$ exhibits a high coercivityof 4 kOe at room temperature with Curie temperature of $400^{\circ}C$ while the $Nd{(Fe_{0.5}Co_{0.5})}_2$ compound shows a magnetic moment of $2.8\;{\mu}_B/f.u.$.

  • PDF

The Magnetic Properties of Sm-(Co-Fe) Alloy Thin Films (Sm-(Co-Fe)계 합금 박막의 자기적 성질)

  • Kim, Taek-Su;Hong, Yeon-Gi;Kim, Jong-O
    • Korean Journal of Materials Research
    • /
    • v.7 no.2
    • /
    • pp.136-139
    • /
    • 1997
  • 증착법을 이용하여 $Sm(Co_{1-x}Fe_{x})$$Sm_{2}(Co_{1-x}Fe_{x})_{17}$(X=0, 0.3,0.5,0.7)박막을 제작하여 조성변화 및 열처리 온도 변화에 따른 자기적 성질의 변화에 대해 검토 하였다. Fe의 양이 증가 할 수록 포화자화 값은 증가 하지만 각형비는 감소하였고 보자력도 약간 감소하는 경향을 보였다. $Sm(Co_{0.5}Fe_{0.5})_{5}$ 조성박막의 경우, $800^{\circ}C$, 20분 열처리에 의해 약 6.1MGOe의 $(BH)_{max}$을 보였다. 본 박막자석의 자기적 성질의 증대를 위해서는 시료제작 방법의 개선이 필요하다고 사료 된다.

  • PDF

Breeding of Phalaenopsis 'SM 333' with Mini Multiple Flower Formation (소형 다화 분지성 호접란 'SM 333' 육성)

  • Park, No Eun;Son, Beung Gu;Kim, Hong Yul;Lim, Ki-Byung
    • Horticultural Science & Technology
    • /
    • v.33 no.1
    • /
    • pp.149-154
    • /
    • 2015
  • A new Phalaenopsis cultivar 'SM 333' was bred by Sangmiwon Orchid, Korea, which produces young plants through tissue culture techniques. The new cultivar 'SM 333', showing the phenotype of multiflora with pink color and small, multibranching-type characteristics, was derived from crossing between Phalaenopsis 'Odoriko' and 'Be Tris'. An elite individual number '02-03-33' later termed 'SM 333' was selected among about 300 individual progenies, based on an intensive selection process covering vegetative and flowering distinctiveness over more than 2 years. In year 2004-2005, the 1st and 2nd characteristic analyses were carried out through performance and uniformity tests. 'SM 333' shows flower color that is bright clean pink (RHS # RP69D) and flower shape that is formal type with 5.0 and 5.8 cm in flower height and width, respectively. 'SM 333' is regarded as raceme flower type suitable for the small casual flower market. The leaves of 'SM 333' grow horizontally and about 20.8 cm in length and 6.5 cm in width. This cultivar also possesses no genetic variation, and is amenable to fast in vitro propagation and easy growth due to its vigorous growth habit. This 'SM333' was registered (Reg. # 2916) with Korea Seed & Variety Service (KSVS) on 1st December, 2009, and the plant breeder's right is currently controlled by Sangmiwon Orchid Company, Korea.

Inhibitory Effect of Mouse Paw Edema by Solanum melongena Aqueous Extract (노랑가지 물추출물에 의한 생쥐 발바닥 부종의 억제효과)

  • 김대기;백옥선;임종필;이영미
    • YAKHAK HOEJI
    • /
    • v.47 no.5
    • /
    • pp.325-330
    • /
    • 2003
  • Solanum melongena L. (Solanaceae) has anti-oxidant, analgesic, and hypolipidemic effects. We previously showed that Solanum melongena (SM) aqueous extract inhibits mast cell-mediated allergic reactions. The activation of protease-activated receptor-2 (PAR-2) induces acute inflammation in rat hindpaw. In the present study, we investigated the effects of the SM aqueous extract on mouse paw edema induced by PAR2 agonists. Trypsin or trans-cinnamoyl-LIGRLO-NH$_2$ (tc-NH$_2$), PAR-2 agonists, was injected into the hind paw of mice to induce paw edema. SM aqueous extract (1, 5, 10, and 100 mg/kg) was orally administered 1 hr before induction of paw edema. SM aqueous extract (5, 10, and 100 mg/kg) significantly inhibited both paw edema and vascular permeability in the dose-dependent manner. Furthermore, SM aqueous extract (10 mg/kg) significantly inhibited PAR-2 agonist-induced myeloperoxidase (MPO) activity and tumor necrosis factor (TNF)-$\alpha$ expression in paw tissue compared to that of saline. These results suggest that SM aqueous extract may be useful for treatment of PAR-2-mediated inflammation.

Effect of Sm2O3 Doping on Microstructure and Electrical Properties of ZPCCA-Based Varistors

  • Nahm, Choon-Woo
    • Korean Journal of Materials Research
    • /
    • v.31 no.10
    • /
    • pp.539-545
    • /
    • 2021
  • The effect of Sm2O3 doping on the microstructure and electrical properties of the ZPCCA-based varistors is comprehensively investigated. The increase of doping content of Sm2O3 results in better densification (from 5.70 to 5.82 g/cm3) and smaller mean grain size (from 7.8 to 4.1 ㎛). The breakdown electric field increases significantly from 2568 to 6800 V/cm as the doping content of Sm2O3 increases. The doping of Sm2O3 remarkably improves the nonlinear properties (increasing from 23.9 to 91 in the nonlinear coefficient and decreasing from 35.2 to 0.2 µA/cm2 in the leakage current density). Meanwhile, the doping of Sm2O3 reduces the donor concentration (the range of 2.73 × 1018 to 1.18 × 1018 cm-3) of bulk grain and increases the barrier height (the range of 1.10 to 1.49 eV) at the grain boundary. The density of the interface states decreases in the range of of 5.31 × 1012 to 4.08 × 1012 cm-2 with the increase of doping content of Sm2O3. The dielectric constant decreases from 1594.8 to 507.5 with the increase of doping content of Sm2O3.

Phase Relation and Microwave Dielectric Properties of $BaO-(Nd, Sm)_2O_3-TiO_2$ Ceramic System ($BaO-(Nd, Sm)_2O_3-TiO_2$계 세라믹스의 상관계 및 마이크로파 유전특성)

  • 김희도;김진호;조상희
    • Journal of the Korean Ceramic Society
    • /
    • v.31 no.9
    • /
    • pp.995-1004
    • /
    • 1994
  • Phase relation and microwave dielectric properties of the system BaO.(Nd1-xSmx)2O3.TiO2 (n=4, 5) were studied. With n=5 (1 : 1 : 5), Ba2Ti9O20 and TiO2 formed in case of X$\leq$0.7, and Ba2Ti9O20 and Sm2Ti2O7 formed at X=1.0 as the second phases dispersed in fine-grained orthorhombic matrix phase. With n=4 (1 : 1 : 4). on the contrary, only fine grains of an ortho-rhombic phase were observed irrespective of Nd/Sm ratio. The compositions of these two stable orthorombic phases having distinct lattic constants even with the same Nd/Sm ratio were estimated as 4BaO.5(Nd1-xSmx)2O3.18TiO2 and BaO.(Nd1-xSmx)2O3.4TiO2 with n=5 and n=4 in the system BaO.(Nd1-xSmx)2O3.TiO2, respectively. Consequently the composition BaO.(Nd1-xSmx)2O3.5TiO2 lies in the compatible triangle of 4BaO.5(Nd1-xSmx)2O3.18TiO2 and the second phases mentioned above. The microwave dielectric properties (~4 GHz) of BaO.(Nd1-xSmx)2O3.5TiO2 can be controlled effectively by adjusting Sm content : with increasing X from 0 to 0.7, both dielectric constant and the temperature coefficient of resonant frequency decreased monotonically from 82 to 65 and from 91 (ppm/$^{\circ}C$) to -19(ppm/$^{\circ}C$), respectively, while unloaded Q(Qo) remained constant at about 2,600.

  • PDF

Effect of Upset pressure on weldability in the Friction Welding of SM45C-Solid and SM45C-Pipe which is used in the Piston-Rod (경량화 피스톤 로드에 사용되는 SM45C/SM45C-Pipe의 마찰용접시 업셋압력이 미치는 영향)

  • Min, Byung-Hoon;Choi, Won-Yong;Min, Taeg-Ki
    • Transactions of the Korean Society of Machine Tool Engineers
    • /
    • v.17 no.5
    • /
    • pp.36-43
    • /
    • 2008
  • This research is tendencious to manufacture solid piston-rod of shock absorber as hollow piston-rod using friction welding. The SM45C has been welded to the SM45C-pipe in order to investigate the effect of upset pressure on friction weldability. The friction time and upset pressure was variable conditions under the conditions of spindle revolution of 2,000rpm, friction pressure of 55MPa, and upset time of 2.0seconds. Under these conditions, the microstructure of weld interface, tensile fracture surface and mechanical tests were studied of friction weld, and so the results were as follows. When the upset pressure is sufficient, gets the high tensile strength. The optimal welding conditions were n=2,000rpm, $P_1$=55MPa, $P_2$=95MPa, $t_1$=1.5sec, $t_2$=2.0sec when the total upset length is 4.5mm.

Absorption and Fluorescence of Sm(III) Complexes with some Terdentate Ligands

  • Kim, Jong-Goo;Yoon, Soo-Kyung;Yun, Sock-Sung;Kang, Jun-Gill
    • Bulletin of the Korean Chemical Society
    • /
    • v.13 no.1
    • /
    • pp.54-59
    • /
    • 1992
  • Spectroscopic measurements and theoretical calculations are performed for the four 1 : 3 Sm(III) : ligand solutions. The ligands included in this study are oxidiacetate, iminodiacetate, methyliminodiacetate and dipicolinate. The oscillator strengths for the $4f{\to}4f$ multiplet-to-multiplet transitions are empirically determined from the absorption spectra. The intensity parameters ${\Omega}_{\lambda}\;({\lambda}=2,\;4,\;6)$ of $Sm^{3+}$(aquo) and ${SmL_3}^{3-}$ complexes are also evaluated by applying the Judd-Ofelt theorem to the observed oscillator strengths. The values of the intensity parameters are compared and discussed in term of structural properties of the complexes. In addition, the fluorescence spectra are reported for the Sm(III) complex systems under mild alkaline condition. The excitation from the $^6H_{5/2}$ ground state to any excited states lying above the emitting energy level $(^4G_{5/2})$ produces four fluorescence bands, following nonradiative transitions from a certain excited state to the $^4G_{5/2}$ state. The ratios of oscillator strengths of ${SmL_3}^{3-}$ complexes to that of $Sm^{3+}$(aquo) are also evaluated from the fluorescence spectra and compared to the results obtained from the absorption bands.