• Journal of Life Science
• /
• v.13 no.4
• /
• pp.433-440
• /
• 2003

Osmotic and solid matrix priming treatments enhanced germination performance. We compared osmotic with solid matrix priming to determine the more effective treatment for improving seed germination in pepper and tomato. Seed hydration was immediately observed after osmotic priming and solid matrix priming treatment. The moisture content of solid matrix primed seeds was lower than that of osmotic primed seeds in the two vegetable crops. Osmotic priming and solid matrix priming did not increased percent germination, but showed shorter number of days to 50% of the final germination percentage ($T_{50}$) compared with untreated seeds, regardless of germination temperature. $T_{50}$ value was reduced in osmotic or solid matrix primed pepper seeds about 6.0, 5.0, 4.6 and 4.0 days compared with untreated seeds at 15, 20, 25, and $30^{\circ}C$, respectively. While, that in tomato seeds was reduced about 3.3, 5.0, 4.6 and 4.0 days compared with untreated seeds at 15, 20, 25, and $30^{\circ}C$, respectively. The effectiveness of osmotic priming or solid matrix priming in reducing the $T_{50}$ was greater when the seeds were germinated at $15^{\circ}C$ than at temperature of higher than $20^{\circ}C$. Solid matrix primed seeds germinated faster than osmotic primed seeds at all temperature in pepper. However, there was no significant difference on the percentage germination between solid matrix and osmotic primed seeds in tomato. After priming, dried-bark seeds showed faster germination than surface-dried seeds in pepper. On the other hand, there was no significant difference in tomato. Emergence of pepper and tomato seeds was markedly enhanced by osmotic priming or SMP treatment although the final emergence percentage was not significantly influenced. On the other hand, early growth was not significantly influenced by osmotic priming or SMP treatment of pepper and tomato seeds.

• Journal of Digital Convergence
• /
• v.10 no.6
• /
• pp.331-339
• /
• 2012

The easy and simple simultaneous analytical method of preservatives (BA, SA, DHA, MP, EP, IPP, PP, IBP and BP) was studied by more easily changing from method used in food and drug using HPLC with scherzo SM-C18 column. All presevatives were seperated successfully in mobile phase of 50 mM ammonium formate : 0.1% phosphoric acid (50:50 v/v%) and 50 mM ammonium formate : acetonitrile (30 : 70). Retention time of BA, SA, DHA, MP, EP, IPP, PP, IBP and BP was 7.74, 9.08, 12.57, 13.83, 21.62, 27.29, 28.20, 33.20 and 33.68 min, respectively. The calibration curves of BA, SA, DHA, MP, EP, IPP, PP, IBP and BP were linear over the concentration range of 5~80 ${\mu}g/mL$ with correlation coefficient of above 0.999. The limit of detection (LOD) and limit of quantitation (LOQ) of BA, SA, DHA, MP, EP, IPP, PP, IBP and BP were 0.52 and 1.58, 1.09 and 3.29, 1.00 and 3.03, 1.36 and 4.13, 1.26 and 3.83, 1.02 and 3.08, 1.11 and 3.37, 0.82 and 2.48, 0.85 and 2.59 ${\mu}g/mL$, respectively. The coefficients of variation for intra- and inter-day assay were 0.12~2.68 and 0.18~2.66%, respectively. The developed method showed good intra- and inter-day precision and accuracy. The preservatives used in mouthwashes were BA, MP and PP and were detected in 24 samples(86%) except for 4 samples and not showed significant difference in using dose of adult and children. In conclusion, the developed method can be useful for simultaneous analysis of preservatives in mouthwashes and these results suggest that could be applied to fundamental study and guideline on content of preservatives in mouthwashes.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.1
• /
• pp.22-26
• /
• 2013

PTCR ceramics of $(Ba_{0.998}Sm_{0.002})TiO_3+0.001MnCO_3+xSiO_2$ (x=1, 2, 3, 4, 5, 6 mol%) were fabricated by solid state method. Disk samples of diameter 5 mm and thickness about 1mm were sintered at $1,290^{\circ}C$ for 2 h in reduced atmosphere of $5%H_2-95%N_2$ followed by re-oxidation at $600^{\circ}C$ for 30 min. in $20%O_2-80%N_2$.and their microstructures and electrical properties were investigated with SEM and Multimeter. The color of sintered samples was strongly dependent on $SiO_2$ content showing that the color of samples with $SiO_2$ of 1~2 mol% was gray but that of samples with $SiO_2$ of 4~6 mol% was changed from gray to blue, which seems to be related with the reduction of samples due to the oxygen vacancies created during the sintering in reduced atmosphere. $SiO_2$ content had a great influence on the microstructure and the electrical properties. With increasing $SiO_2$ content, the grain size of samples increased and the resistivity as well as the resistivity jump ($R_{285}/R_{min}$) decreased, which is considered to be attributed to the resistivity change at grain interior and grain boundary due to the fast mass transfer through $SiO_2$ liquide phase during the sintering. Samples with 2 mol% $SiO_2$ has the resistivity of $202{\Omega}cm$ and the resistivity jump of 3.28. It is expected that $SiO_2$ doped $BaTiO_3$ based PTC ceramics can be used for multilayered PTC thermistor due to the resistance to the sintering in reduced atmosphere.

• Journal of the Korean Society for Precision Engineering
• /
• v.3 no.2
• /
• pp.62-75
• /
• 1986

An experimental investigation of the machining characteristics such as cutt- ing resistance, surface roughness and tool wear in turning the test pieces of SM45C steel with both coated and uncoated carbide tool tips under various cutting conditions was conducted. Also a specially designed simple vibration damping device was experimentally evaluated for its effectiveness on machined surface roughness and a vibration test was conducted to confirm its ability to reduce the amplitude. Based on these tests finding, the following conclusions are made; 1. The cutting resistance($\textrm{p}_{1}$) increases as the depth of cut(d) increases at fixed feed rate(f) over the cutting speed(v) range of 43-226 m/min and p decreses about 18% average when V is increased for fixed d and f. At V= 226m/min, $\textrm{p}_{1}$/for A, C tips are about the same level but $\textrm{p}_{1}$ for B tip is 15% less than A, C tips. 2. The specific cutting resistance(Ks) at V=226 m/min was derived for A, B, C tips respectively and the value of Ks for B rip is about 20% less than A, C tips. 3. The surface roughness(Ra) improves significantly as the cutting speed(V) is increased and this effect was greater when V>100 m/min. On the other hand, Ra deteriorates as the feed rate(f) is increased and this trend was accelerated when f>0.3 mm/rev. With regard to the difference of Ra values among A, B, C tips, at V=226m/min, d=0.4mm, and f=0.31-0.61mm/rev, Ra values for B.C tips are about 17% less than tip A. 4. The experimental tool wear equations were derived for A, B, C tips and from these equations, the tool life($\textrm{T}_{\textrm{L}}$) baced on the I.S.O. criteria was calculated to be $\textrm{T}_{\textrm{L}}$<$\textrm{T}_{\textrm{LB}}$<$\textrm{T}_{\textrm{LC}}$ for both flank wear($\textrm{V}_{\textrm{B}}$) and boundary wear($\textrm{V}_{\textrm{N}}$). Hence, the coated tips are superior to the uncoated tip and tip C is considered to be the best. 5. The cutting resistance may be slightly reduced and the surface rounghness improved when the damper is used especially when V>100 m/min. Therefore this damping device is considered to be effective and practical. The experimental surface roughness equations were also derived. Based on the vibration test, it is established that the surface roughness improvement was the result of amplitude reduction made possible by the damper.

• Tuberculosis and Respiratory Diseases
• /
• v.56 no.3
• /
• pp.261-268
• /
• 2004

Background : The resurgence of tuberculosis and outbreaks of multidrug resistant (MDR) tuberculosis have increased the emphasis for the development of new susceptibility testing of the Mycobacterium tuberculosis for the effective treatment and control of the disease. Conventional drug susceptibility testings, such as those using egg-based or agar-based media have some limits, such as the time required and difficulties in determining critical inhibitory concentrations, but these are still being used in many diagnostic laboratories because of no better lternatives, considering cost and accuracy. To overcome these limits, a rapid and simple method for new susceptibility testing, using live and dead assays, was applied for a bacterial cell viability assay to distinguish dead from live bacterial cells based on two-color fluorescence. Materials and Methods Strains : Forty strains were used in this study, 20 susceptible to all antituberculosis drugs and the other 20 resistant to the four first line antituberculosis drugs isoniazid, rifampicin, streptomycin and ethambutol. Antibiotics : The four antibiotics were dissolved in 7H9 broth to make the following solutions: $0.1{\mu}g\;isoniazid(INH)/m{\ell}$, $0.4{\mu}g\;rifampicin(RMP)/m{\ell}$, $4.0{\mu}g\;streptomycin(SM)/m{\ell}$ and $4.0{\mu}g\;ethambutol(EMB)/m{\ell}$. Results : Live and dead Mycobacterium tuberculosis cells fluoresced green and red with the acridin (Syto 9) and propidium treatments, respectively. These results are very well accorded with conventional drug susceptibility testing by proportional method on Lowensen-Jensen media (L-J) containing 4 drugs (INH, RMP, EMB and SM), showing a 93.7 % accordance rate in susceptible strains and 95% in resistant strains. Conclusion : The results of the drug susceptibility testing using the live and dead bacterial cell assay showed high accordance rates compared with the conventional proportion method on L-J. This finding suggests that the live and dead bacterial cell assay can be used as an alternative to conventional drug susceptibility testing for M. tuberculosis strains.

• Journal of Aquaculture
• /
• v.20 no.2
• /
• pp.140-143
• /
• 2007

Cytogenetic analyses of an endemic species, Coreoleuciscus splendidus (Cyprinidae) was performed including erythrocyte measurement, chromosome count and karyotyping, nucleolar organizing region (NOR) banding and flow cytometric analysis of genome size. C. splendidus had the same modal chromosome number of 2n = 48 between sexes, however, displayed a sex-related dimorphism in their chromosome karyotypes. Males represented a pair of heteromorphic chromosomes which couldn‘t be seen in any female individuals, indicating that the sex determination mechanism of this species should be a typical XX-XY based male heterogamety (female=10M+6SM+8A+XX vs male=10M+6SM+8A+XY). Other cytogenetic features such as Ag-NORs located in a pair of acrocentric chromosomes, estimated nuclear volume ($28{\mu}m^3$) and cellular DNA content (2.4 pg/cell) suggest that genetic recombination might be the main driving force responsible for the evolution of this species rather than the polyploidy-based evolutionary process as in many other Cyprinidae species.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.12
• /
• pp.1756-1763
• /
• 2017

Objective: The study aimed at assessing the effects of frozen storage duration on quality characteristics, lipid oxidation and sensory quality of various horse muscles. Methods: Five representative muscles: longissimus dorsi (LD), gluteus medius (GM), semimembranosus (SM), biceps femoris (BF), and triceps brachii (TB) at 24 h post-mortem obtained from 28-mo-old Jeju female breed horses (n = 8) were used in the present investigation. The muscles were vacuumpackaged and frozen at $-20^{\circ}C$ for 120, 240, and 360 days. All the samples were analyzed for thawing and cooking losses, pH, Warner-Bratzler shear forces (WBSF), color traits, total volatile basic nitrogen (TVBN), thiobarbituric acid reactive substances (TBARS) and sensory traits. The muscle samples analyzed on day 0 of frozen storage (fresh, non-frozen) were used for comparison. Results: Results revealed that thawing and cooking losses significantly (p<0.05) increased in all the muscles after 120 days and then remained unchanged up to 360 days of frozen storage. The TBARS and TVBN contents significantly increased as increasing frozen storage time up to 360 days (p<0.05). While, significant decreases in WBSF values were observed for all the muscles with increased frozen storage time (p<0.05). Frozen storage variously affected the color traits of the muscles for instance; the redness of LD, GM, and BF muscles showed a decreasing tendency during frozen storage while it was not changed in TB and SM muscles. Furthermore, the frozen storage did not produce detrimental effects on sensory quality as it did not cause flavor and juiciness defects whereas it partially improved the tenderness of all the muscles studied. Conclusion: Based on the results obtained from our work, it is concluded that frozen storage could be applied to increase the long-term shelf life of horsemeat while still retaining its sensory quality.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.3
• /
• pp.91-98
• /
• 2017

The purpose of this study is to provide a design and operation technical guideline for meeting the appropriate design criteria to bio-gasification facilities treating organic wastes. 9 anaerobic digestion facilities which is normally operated during the field survey and 14 livestock manure farms were selected for precision investigation. the physicochemical analysis was performed on the moisture and organic contents, nutrients composition (carbohydrate, fat, protein), volatile fatty acids (VFAs), and nitrogen, etc. Volatile solids (VS) of organic wastes brought into the bio-gasification facilities were 2.81 % (animal manure only) and 5.92 % (animal manure+food waste), respectively. Total solids (TS) reults of samples from livestock farms were 5.6 % in piglets and 11~13 % in other kinds of breeding pigs. The actual methane yield based on nutrients contents was estimated to $0.36Sm^3CH_4/kgVS$ which is equivalent to 72 % of theoretical methane yield value. The optimum mixing ratio depending on the effect of the combined bio-gasification was obtained through the continuous stirred-tank reactor (CSTR) which is operated at different mixing ratio of swine manure and food waste leachate. The range of swine manure and food waste leachate from 60:40 to 40:60 were adequate to the appropriate conditions of anaerobic digestion; less than 100 gTS/, more than alkalinity of 1 gCaCO3/L, C/N ratio 12.0~30.0, etc.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.1
• /
• pp.154-159
• /
• 1987

In the previously reported Part I, the behavior of the flank wear for carbide tool was studied as a preceeding step to present a simple method for Quick Tool-Life Testing, and the following general equation was obtained $W_{f}$ =(a+bt) $V^{m}$ . In this study the following step-cutting formula for the constants a, b and m in the above general model is derived by using step-cutting data [a numerical formula] To check the validity of the above formula, the comparison is made between the tool-life equation inferred in this method and that inferred in the conventional tool-life testing method, when the wear criterion is 0.3mm. The equation obtained in the present method is V(T')$^{0.57}$=1763 whereas the equation obtained in the conventional tool-life testing method is V(T)$^{0.56}$=1605 The results of the above two formula are satisfactory and also verify the validity of the present research.earch.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.11 no.1
• /
• pp.75-89
• /
• 1984

A total of 141 strains of Streptococcus mutans were isolated from dental plaques of 153 subjects. Eighty-two children with caries-experience, 18 caries-free children and their mothers were participated. All isolates were examined for their serotypes by immunodiffusion method with 7 reference sera and their antibiotic susceptibilities to 7 antibiotics by agar dilution method using 7 kinds of antibiotics, and were compared their results by caries experience (DMFT ratio) and by intrafamilial levels. 1. Isolation rate of Streptococcus mutans were greater in samples of carious teeth than those of sound teeth, and in mothers than in children. 2. Multiple serotypes of Streptococcus mutans were occasionally found in a single samples. 3. Of the total 141 isolates (83 isolates from children, and 58 from their mothers), type c isolates were most prevalent (63.8%). Type d,e and f were found, comprizing 14.9%, 10.6% and 6.4% respectively. Serotype g, a and untypable strain were also found but far lower frequencies (2.8-0.7%), and type b was detected. 4. These results suggest that there are no significant correlation among the distribution of serotypes, antibiotic susceptibilities, caries experience and intrafamilial relationships. 5. Most of isolates were susceptible to chloramphenicol (100%), penicillin (95.7%), ampicillin (94.3%), and gentamicin (92.2%), but about one-third isolates were resistant to cephaloridine (27%), streptomycin (33.3%) and kanamycin (47.6%), resulting that 91 strains (64.5%) among 141 isolates were resistant to one or more drugs used. 6. Of the 91 resistant strains, 20 different resistant patterns were observed, and the most frequently encountered patterns were KM, SM and CE.