• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.1
• /
• pp.120-125
• /
• 2010

For application of transparent bulletproof materials, the SLS(soda-lime-silicate) glass was heated by 2-step crystallization. The DTA curve for SLS glass revealed the nucleation and crystal growth temperature at about $575^{\circ}C$ and $675^{\circ}C$, respectively. The crystallized glass was heated at various conditions(temperature, time). As a result, the maximum nucleation and crystal growth rates were $3.8\times10^5/mm^3{\cdot}hr$ at $575^{\circ}C$ and 20.58nm/min at $680^{\circ}C$, respectively. The bending strength, fracture toughness and vickers hardness were 451.7MPa, $0.9388MPa{\cdot}m^{1/2}$, and $693.9H_v$ which were 201%, 31%, and 22% higher than parent glass, respectively. Surface image and transmittance of crystallized SLS glass were analyzed by optical microscopy and UV/VIS/NIR spectrophotometer. Transmittance of crystallized SLS glass at visible-range(200~800nm) was not changed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.561-564
• /
• 2002

With Rapid Prototyping system, the efficient packing in a fixed work volume reduces build time when multiple parts are built in a process. In this paper, an efficient and rapid packing algorithm is developed for SLS system that has cylindrical workspace. A genetic algorithm is implemented to place as many part as possible in a vat. For fast computation, a collision detection algorithm "k-DOPs Tree" is implemented.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.790-792
• /
• 2005

In this work we attempted to find the origin of brightness non-uniformity in SLS poly-Si TFT AMOLED. By developing a suitable SLS process with a compensation circuit, we have successfully improved the non-uniformity from 40% to 1.7%. We could fabricate 2.2" AMOLED display using SLS poly-Si.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.6
• /
• pp.235-240
• /
• 2003

In this paper, we present the fabrication and the characteristic analysis of sequential lateral solidification(SLS) poly-Si thin film transistors(TFT's) with molybdenum gate for active matrix liquid displays (AMLCD's) pixel controlling devices. The molybdenum gate is applied for the purpose of low temperature processing. The maximum processing temperature is 55$0^{\circ}C$ at the dopant thermal annealing step. The SLS processed poly-Si film which is reduced grain and grain boundary effect, is applied for the purpose of electrical characteristics improvements of poly-Si TFT's. The fabricated low temperature SLS poly-Si TFT's had a varying the channel length and width from 10${\mu}{\textrm}{m}$ to 2${\mu}{\textrm}{m}$. And to analyze these devices, extract electrical characteristic parameters (field effect mobility, threshold voltage, subthreshold slope, on off current etc) from current-voltage transfer characteristics curve. The extract electrical characteristic of fabricated low temperature SLS poly-Si TFT's showed the mobility of 100~400cm$^2$/Vs, the off current of about 100pA, and the on/off current ratio of about $10^7$. Also, we observed that the change of grain boundary according to varying channel length is dominant for the change of electrical characteristics more than the change of grain boundary according to varying channel width. Hereby, we comprehend well the characteristics of SLS processed poly-Si TFT's witch is recrystallized to channel length direction.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.529-530
• /
• 2007

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.571-572
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.15-16
• /
• 2006

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.973-974
• /
• 2008

• Journal of Pharmaceutical Investigation
• /
• v.22 no.4
• /
• pp.307-315
• /
• 1992

Dissolution rate of practically insoluble mefenamic acid was improved by roll mixing with sodium lauryl sulfate (SLS) or polyvinylpyrrolidone (PVP). The dissolution rate of the drug roll mixtures with SLS was superior to that of roll mixtures with PVP. The maximal dissolution rate was found in the roll mixtures system with SLS content of 60%. The dissolution rate of mefenamic acid roll mixtures with SLS content of 60% reached to the maximum value after 10 min of roll mixing. The transport of roll mixtures with SLS across rat jejunum was studied by the perfusion method using everted rat jejunum in vitro. The absorption rate of roll mixtures was superior to that of mefanamic acid.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1389-1393
• /
• 2007

Selective Laser Sintering (SLS) is currently recognized as a leading process in the new field of solid freeform fabrication (SFF). It is used to fabricate in a short time any 3 dimensional shapes by layer-by-layer sintering of polymer, ceramic or metal powder. To develop this SFF system, it needs effective laser scanning path, temperature and z-axis control for lamination. Therefore, in this study, through the application of control algorithm for sintering process have performed, temperature evaluation for sintering process has performed and the manufacturing sample using SLS process.