• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.1
• /
• pp.75-87
• /
• 2005

This study aims at predicting and mapping of the landslide susceptibility in the Geumho river watershed using GIS and Remote Sensing techniques. We constructed the spatial database of affecting factors such as slope angle, slope aspect, lithology, landuse, and vegetation index (NDVI) at a $30m{\times}30m$ resolution. The landslide susceptibility of the study area was predicted through overlay analysis and adding up estimation matrix, and the predicted map of landslide susceptibility with six categories (stable, very low, low, moderate, high, very high) was constructed. As the results, it showed that the very high susceptibility zones made up approximately 0.3% of the total study area, and these zones were mainly distributed in the forest area with the high slope angle and low vegetation index.

• Korean Journal of Environment and Ecology
• /
• v.22 no.2
• /
• pp.119-127
• /
• 2008

This research managed to establish the space information on incidence factors of landslide targeting Bukhansan National Park and aimed at suggesting a basic data for disaster prevention of a landslide for the period to come in Bukhansan National Park through drawing up the map indicating vulnerability to a landslide and ecological risks by the use of overlay analysis and adding-up estimation matrix analysis methods. This research selected slope angle, slope aspect, slope length, drainage, vegetation index(NDVI) and land use as an assessment factor of a landslide and constructed the spatial database at a level of '$30m\times30m$' resolution. The analysis result was that there existed high vulnerability to a landslide almost all over Uidong and Dobong valleys. As for ecological risks, Dobong valley, Yongueocheon valley, Jeongneung valley and Pyeongchang valley were analyzed to be higher, so it is judged that the impact on a landslide risk should be also considered in time of establishing a management plan for these districts for the time to come.

• Journal of the Korean Institute of Landscape Architecture International Edition
• /
• no.1
• /
• pp.13-25
• /
• 2001

Recently there have been increasing demands and desire for the urban open space due to urban development or environmental deterioration. Urban natural parks in Seoul provide citizens with comfortable open space and thus play an important role as learning spaces to experience nature and understand the environment. Accordingly, this study aims to analyze existing vegetation and provide basic data for the conservation and management plans of urban natural parks and education programs. The contents of the study encompass natural environment such as topography, altitude, slope and aspect and botanical ecosystem including the structure of plant communities and tree growth. According to the result of topography analysis, the overall altitude was not high but the slope was relative steep. Vegetation of Seoo Royal Tomb, a urban natural park has been classified into 12 types, and they include; Quercus acutissima community(lowland type), Quercus acutissima community(valley type), quercus variabilis community, Quercus mongolica community, Castanea crenata community, Capinus laxiflora community, Pinus densiflora community(lowland type), Pinus densiflora community(slope type), Robinia pseudo-acacia community, Populos$\times$albaglandulosa community, Pinus rigida community, and Pinus koraiensis community. Based on the survey and analysis results, we have classified the study area into conservation, buffer, and utilization zones for the effective management. This study provides basic data to support the establishment of master plans for urban natural parks by analyzing vegetation conditions at Seoo Royal Tomb, an urban natural park, Based on the results presented in the study, consistent monitoring work needs to be conducted, and elaborate management plans also should be prepared.

• Journal of Welding and Joining
• /
• v.27 no.6
• /
• pp.74-79
• /
• 2009

Titanium and titanium alloy can be reproduced immediately even if oxide films($TiO_2$) break apart in sea water. Therefore, since titanium demonstrates large specific strength and outstanding resistance to stress corrosion cracking, crevice corrosion, pitting and microbiologically influenced corrosion in sea water environment, it has been widely applied to heat exchanger for ships. In particular, with excellent elongation, pure titanium may be deemed as optimal material for production of heat exchanger plate which is used with wrinkles formed for efficient heat exchange. Conventional plate type heat exchanger prevented leakage of liquid through insertion of gasket between plates and mechanical tightening by bolts and nuts, but in high temperature and high pressure environment, gasket deterioration and leakage occur, so heat exchanger for LPG re-liquefaction device etc do not use gasket but weld heat exchanger plate for use. On the other hand, since welded plate cannot be separated, it is important to obtain high quality reliable welds. In addition, for better workability and production performance, lasers that can obtain weldment with large aspect ratio and demonstrate fast welding speed even in atmospheric condition not in vacuum condition are used in producing products. So far, 1st report and 2nd report compared and analyzed embrittlement degrees by bead colors of weldment through quantitative analysis of oxygen and nitrogen and measurement of hardness as fundamental experiment for the evaluation of titanium laser welding, and evaluated the welding performance and mechanical properties of butt welding. This study welded specimens in various conditions by using laser and GTA welding machine to apply edge welding to heat exchanger, and evaluated the mechanical strength through tensile stress test. As a result of tensile test, laser weldment demonstrated tensile strength 4 times higher than GTA welds, and porosity could be controlled by increasing and decreasing slope of laser power at overlap area.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.3
• /
• pp.21-28
• /
• 2009

As the natural aggregates such as sand and clay are getting exhausted, the quantity of utilizing geosynthetics is being increased in the solid waste landfill. Especially, the waste landfills have been constructed at the gorge in the mountainous area and reclaimed land from the sea in the Korean Peninsula. Those areas are not favorable for construction of waste landfill in geotechnical engineering aspect. In this study, the frictional characteristics of geosynthetics that used in the waste landfill were estimated. Then, the studies of the behavior of geosynthetics and stability of LDCRS (Leachate Detection, Collection, and Removal System) of side slope were conducted in the waste landfill by means of the pilot test, and numerical analysis. Geocomposite which is combined type or separated type is influenced on the strain itself, and also implicated in the stress and strain of geomembrane at the lower layer. The strain on the combined type of geocomposite is about 50% smaller than that of the separated type at the side slope. The lateral displacement and settlement of top at the slope with the separated type are three times greater than that of the combined type. In the numerical analysis, discontinuous plans in between ground and geosynthetic, geosynthetic and geosynthetic, goesynthetic and waste have been modeled with the interface element. The results gave a good agreement with the field large-scale model test. The relative displacements of geosynthetics were also investigated and hence the interface modeling of liner system is appropriate for analysis of geosynthetics liner system in the waste landfill.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.1
• /
• pp.59-67
• /
• 2004

This study was carried out to select proper species for early stage replantation in granite forest roads cut-slope. From one to fourteen year elapsed forest roads in eight regional areas of Gyeongsang-do and Jeolla-do, sample plots were selected, and their vegetations and environmental factors were investigated. Soil organic matter, total nitrogen, soil moisture content, and bulk density in the granite weathering soils were below 0.4%, 0.03%, 12.4%, and above 1.2g/$cm^3$, respectively. The result indicated that the soil was not good for plant growth. The environmental factors affecting distribution of species in the granite forest roads were the elapsed year, elevation, and cut-slope aspect. Invaded species with high frequency in the forest road cut-slope ordered Pinus densiflora, Lespedeza bicolor, Rubus crataegifolius, Alnus hirsuta, Youngia denticulata, Patrinia villosa, Artemisia princeps var. orientalis, Zanthoxylum schinifolium, and Dactylis glomerata. Herbs seeded in earth stage such as Dactylis glomerata, Eragrostis curvula, Festuca arundinacea, Lespedeza sp., and Amorpha fruticosa had changed into perennial herbs and shrubs such as Youngia denticulata, Patrinia villosa, Aster scaber, Patrinia scabiosaefolia, Melica onoei, Astilbe chinensis var. davidii, Chrysanthemum zawadskii var. latilobum, Pueraria thunbergiana, Stephanandra incisa, and Clematis apiifolia, and had changed into plants such as Artemisia princeps var. orientalis, Artemisia keiskeana, Miscanthus sinensis, Pinus densiflora, Rhododendron mucronulatum, Rubus crataegifolius, and Zanthoxylum schinifolium according to elapsed year of forest roads. Leguma such as Lespedeza sp., Pueraria thunbergiana, Amorpha fruticosa, etc., herbs such as Artemisia keiskeana, Artemisia princeps var. orientalis, Chrysanthemum zawadskii var. latilobum, Miscanthus sinensis, etc., and woody plants such as Pinus densiflora, Rubus crataegifolius, Rhododendron mucronulatum, etc., with foreign herbs were considered as proper species for replantation in granite forest road cut-slope.

• Journal of the Korean association of regional geographers
• /
• v.22 no.4
• /
• pp.887-911
• /
• 2016

The empirical law that transverse dunes migrate inversely with their heights leads logically to the prediction that multiple dune ridges will converse to a single huge dune by merging. This contradicts the existence of the steady state dune fields on the Earth. The recent studies have emphasized dune collisions as a key mechanism to the stability of dunefield. The roles of wind shadow aspect ratio, however, have yet to be fully explored. This research aims to investigate the potential roles of wind shadow aspect ratio in the dynamical behaviors of transverse dune field. The simplified model is established for this, based upon allometric properties of transverse dunes, wind speedup on the stoss slope and sand trapping efficiency. The derived governing equations can be transformed to the zoning criteria and vector field for dune evolution. The dynamics analysis indicates that wind shadow aspect ratios do not produce convergent areas on the behavior space; rather, they just act as one of the factors that affect the trajectories of dune evolution. Though the model cannot represent the stability of dune field, but seem to produce a reasonable exponent for dune spacing-height relations.

• Journal of Forest and Environmental Science
• /
• v.29 no.1
• /
• pp.90-98
• /
• 2013

The purpose of this study was to understand the geographical and environmental distribution of wild animals in Baekdudaegan region using field survey and GIS data. Crucial factors were selected and analyzed to understand the distributional characteristics of wild animals (7 species in 6 families) and rare endemic plants (14 species in 11 families). These crucial factors include stand factors (forest type, DBH class, and crown density), soil factors (bed rock, soil texture, and organic matter), geographical factors (elevation, slope, aspect) and climatic factors (temperature, rain fall, humidity). Finally, 10 factors were selected by statistical analysis and categorized for analyzing geographical and environmental features. Four families such as Muridae, Sciuridae, Suidae and Talpidea in wild animal showed the similar habitat characteristics with the 10 factors.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.292-296
• /
• 2002

This study has been accomplished as a experimental study for field application of 3D Perspective Image Map creation using Digital Topographical Map and based on the Ortho-Projection Image which is generated from Satellite Overlay Images and the precise Relative Coordinates of longitude, latitude and altitude which is corrected by GCP(Ground Control Point). AS to Contour Lines Map which is created by Coordinate conversion of 1:5,000 Topographical Map, we firstly made Satellite Image Map to substitute for Digital Topographical Map through overlapping the original images on top of each Ortho-Projection Image created and checking the accuracy. In addition to 3D Image Map creation for 3D Terrain analysis of a target district, Slope Gradient Analysis, Aspect Analysis and Terrain Elevation Model generation, multidirectional 3D Image generation by DEM can be carried out through this study. This study is to develop a mapping technology with which we can generate 3D Satellite Images of a target district through the composition of Digital Maps and Facility Blueprint and arbitrarily create 3D Perspective Images of the target district from any view point.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.310-313
• /
• 2004

The aim of this study is to evaluate the hazard of landslides at Penang, Malaysia, using a Geographic Information System (GIS) and remote sensing. Landslide locations were identified in the study area from interpretation of aerial photographs and from field surveys. Topographical and geological data and satellite images were collected, processed, and constructed into a spatial database using GIS and image processing. The factors chosen that influence landslide occurrence were: topographic slope, topographic aspect, topographic curvature and distance from drainage, all from the topographic database; lithology and distance from lineament, taken from the geologic database; land use from TM satellite images; and the vegetation index value from SPOT satellite images. Landslide hazardous area were analysed and mapped using the landslide-occurrence factors by logistic regression model. The results of the analysis were verified using the landslide location data and compared with probabilistic model. The validation results showed that the logistic regression model is better prediction accuracy than probabilistic model.