• Applied Chemistry for Engineering
• /
• v.34 no.3
• /
• pp.264-271
• /
• 2023

In this study, ASCO^Ⓡ SLES-430 surfactant was synthesized by adducting 3 moles of ethylene oxide and 1 mole of propylene oxide to lauryl alcohol followed by a sulfation process, and the structure of the synthesized ASCO^Ⓡ SLES-430 was elucidated by performing FT-IR, ¹H-NMR and ¹³C-NMR analyses. Interfacial properties such as critical micelle concentration, static surface tension, emulsification index, and contact angle were measured, and environmental compatibility indices such as oral toxicity and skin irritation were also estimated for ASCO^Ⓡ SLES-430. Both results were compared with ASCO^Ⓡ SLES-226 and ASCO^Ⓡ SLES-328 SLES surfactants possessing 2 moles and 3 moles of ethylene oxide, respectively. In particular, both foaming ability and foam stability were evaluated for ASCO^Ⓡ SLES-430 and compared with ASCO^Ⓡ SLES-226 and ASCO^Ⓡ SLES-328, which have been widely used in detergent products, in order to test the potential applicability of ASCO^Ⓡ SLES-430 in detergent product formulation for a small capacity built-in washing machine.

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.620-625
• /
• 2018

Liquid detergent based on sodium lauryl ethoxy sulfate (SLES) as main ingredient sometimes met gelling film on the surface when it is opened in the air. It was assumed because of the change of phase diagram of micelle by concentration change of surfactant, major ingredient of detergent when the water of detergent is evaporated. SLES showed strong hexagonal liquid crystal (LC) in 30~60 wt%, and lamellar LC over 60 wt%. In this research surface gelling formation of liquid detergent which is based on SLES as main ingredient was because of water evaporation. As water of detergent was evaporated, concentration of surfactant became higher. It was checked that surface gelling was LC of mixed surfactant system. Conclusionally we applied alpha olefin sulfonate (AOS) having good solubility, Sodium secondary alkane sulfonate (SAS) preventing hexagonal LC and hydrotrope sodium xylene sulfonate (SXS) and PEG1500 in order to prevent gelling film in SLES based liquid detergent. Like this, improved formula 4 and 5 can prevent the formation of gelling film on the surface of liquid detergent when it is opened in the air.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.881-885
• /
• 1997

The solubilizing capacity of GL-12, LAS, SLES aqueous solutions and that of mixed surfactant systems were studied using sudan III, which is oil-siluble dye. The solubilizing capacity of mixed surfactant systems was greatly influenced by the mixing ratios. Generally, the solubilizing capacity increased as the composition of GL-12 in the mixed systems increased. From the effect of NaCl on the solubilizing capacity, it was found that the solubilizate is located near the palisade layer in the GL-12/LAS system, and the solubilizate is located inside the micellar core in the GL-12/SLES mixed system. These differences in the location of slubilizate inside micelles result from the difference of molecular structure between LAS and SLES.

• Applied Chemistry for Engineering
• /
• v.7 no.1
• /
• pp.101-108
• /
• 1996

The dynamic surface tension of GL12 (easily biodegradable nonionic surfactant and mild to skin), LAS and SLES aqueous solutions and that of mixed surfactant systems were measured by the maximum bubble pressure method at different mixing ratios. The effects of various salt such as NaCl, CsCl and urea on the dynamic surface tension of mixed surfactant systems were also studied. The dynamic surface tension of GL12 was not influenced by the presence of salts. On the contrary, the dynamic surface tensions of anionic surfactants (LAS and SLES) were significantly affected by the salts. In the mixed surfactant systems, the effect of salt increased as the composition of anionic LAS or SLES increased in the GL12/LAS and GL12/SLES mixtures.

• Animal cells and systems
• /
• v.2 no.3
• /
• pp.341-349
• /
• 1998

To analyze the effects of surfactants on the biosynthesis of galactolipid and the composition of fatty acids, the chloroplast envelope and thylakoid membrane were cultivated in medium treated with anionic surfactants, such as linear alkylbenzene sulfonate (0.002%, LAS), a-olefin sulfonate (O.01%, AOS), and sodium lauryl ether sulfate (0.08%, SLES), respectively. During the cultivation, the chloroplast envelope and thylakoid membrane were isolated from the cells collected at the early and middle phase of the culture and the contents of their fatty acid composition were compared with the control. When treated with surfactants, the contents of total lipid MDGD methylesters, and DGDG methylesters decreased significantly when compared with the control. It was also confirmed that more unsaturated fatty acids were involved in the biosynthesis of galactolipid. The fatty acids utilized in the biosynthesis of MGDG were in the chloroplast envelope and in the control, and linoleic acid in LAS, linolenic acid and oleic acid in AOS, and linolenic acid and oleic acid in SLES. The fatty acids in the biosynthesis of DGDG were linolenic acid and oleic acid in the control linolenic acid and stearic acid in LAS, oleic acid and linolenic acid in AOS, oleic acid and linolenic acid in SLES. In the thylakoid membrane, the major fatty acids in the biosynthesis of MGDG were linolenic acid and oleic acid in the control, oleic acid and linolenic acid in LAS, linolenic acid and linoleic acid in AOS, linolenic acid and palmitoleic acid in SLES. The fatty acids in the biosynthesis of DGDG were linolenic acid and oleic acid in the control, oleic acid and linolenic acid in LAS, linolenic acid and linoleic acid in AOS, palmitoleic acid and oleic acid in SLES.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 1997.11a
• /
• pp.582-589
• /
• 1997

Experiments were conducted to develop foaming agents by using SLES and DH-l09EX as raw material. PG (Propylene glycol) and BC (Butyl cellusolve) were adopted as subsidiary material. The undiluted foam solution was produced with these materials. This solution determined the expansion ratio, viscosity, drainage time and extinguishing ability of the final product. The results indicate that the expansion ratio is over 16 and drainage time is over one minute. The extinguishing ability for SLES system was succeeded in the unit of B-0.5.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.4
• /
• pp.422-427
• /
• 2009

We have investigated the effects of polyols and NaCl on the rheological behaviours of surfactant mixtures. Sodium lauryl ether sulfate (SLES), cocamidopropyl betaine (CAPB), disodium cocoamphodiacetate (DSCA), cocamide DEA (CDEA) and lauroyl/myristoyl DEA (LMDE) were used as surfactants. The polyols added into the surfactant mixture were 1,3-butylene glycol, propylene glycol, glycerin, sorbitol, dipropylene glycol, PEG 1500 and PEG 400. The addition of amphoteric surfactant to SLES aqueous solution lead to increase the height of foam and the viscosity of the system. The addition of nonionic surfactant, LMDE or CDEA to the SLES aqueous solution increased the viscosity and the effect of LMDE was better than that of CDEA. The effect of adding polyols and NaCl into the surfactant mixture aqueous solution lead to increase or decrease the viscosity of the systems depending on the concentration of NaCl and the kinds of polyols. These results can be explained through the salting in or salting out of surfactant of the systems.

• Journal of Environmental Health Sciences
• /
• v.21 no.4
• /
• pp.37-43
• /
• 1995

The course of biodegradation of anionic surfactants, Linear Alkylbenzene Sulfonates(LAS), Sodium Lauryl Ethoxylate Sulfonate(SLES), and Sodium Lauryl Sulfonates(SLS), which are mainly used to make detergents and shampoo, was investigated. The degree of biodegradation was studied as a function of concentration, volumetric flow rate, and temperature in Naktong River. MethyleneBlue Active Substances(MBAS), Total Dissolved Organic Carbon(TOC), and Chemical Oxygen Demand(COD) were measured to evaluate the degree of biodegradation. The degree of biodegradation of LAS was highly dependent upon the concentration and was increased as the concentration was decreased and that of SLES and SLS was almost constant at the concentration of less than 200 ppm, but was much increased as the volumetric flow rate was increased or the temperature was increased.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.10 no.1
• /
• pp.24-41
• /
• 1984

Tallow fatty acid consists of mixtures of fatty acids differing in chain length and saturation. In separation of tallow fatty acid, the effects of the type and concentration of detergents and electrolytes were studied. And the changes of acid composition of particular fractions were determined by gas-chromatography. Sodium lauryl sulfate (SLS), sodium lauryl ether sulfate (SLES) and sodium lauryl benzene sulfonate (SLBS) were used as detergents and NaCl, Na2SO4 and MgSO4 were used as electrolytes. At low concentration of detergent, the tallow fatty acid was not fully wetted, and at high concentration, the emulsion was so stable that the tallow fatty acid was not well separated. The addition of proper amount of electrolyte increased the separation efficiency by the decrease of interfacial tension and by the increase of the amount of adsorbed detergent on the surface of solid fatty acid crystals. The optimum range of detergent was 0.4-0.6% (wt.) in SLS, 0.2-0.4% in SLES and 2.0-) .0% in SLBS. And the optimum range of electrolyte was 2.0-2.5% in NaCl, 3.0-4.0% In Na2SO4 and 0.5-1.0% in MgSO4 respectively.

• Analytical Science and Technology
• /
• v.11 no.2
• /
• pp.105-111
• /
• 1998

The biodegradabilities of surfactants were measured for shampoos and powder detergents for clothing(six kinds of each) in domestic market at present. Also the phosphates that cause of eutrophication and heavy metals to have a direct effect on human body were measured. Analysis results show that though they all come up to KS(Korean Industrial Standards), samples containing plenty of sodium ${\alpha}$-olefin sulfonate(AOS), linear alkyl benzene sulfonate(LAS) and synthetic sodium lauryl etoxylate sulfonate (SLES) have the lower biodegradability than the others. It was found that these samples were petroleum surfactants, and the lower biodegradability than surfactants extracted naturally. The contents of phosphates and heavy metals in the samples were under the regulation limits for the cosmetic standards.