• 제목/요약/키워드: SLED

검색결과 94건 처리시간 0.022초

슬림형 광 디스크 드라이브의 방진설계 (An Anti-vibration Design of Slim-type Optical Disk Drive)

  • 김남웅;김국원;홍구;정문채;김외열
    • 소음진동
    • /
    • 제9권2호
    • /
    • pp.324-330
    • /
    • 1999
  • With the increase of track density, high rotational speed and the compatibility for various media such as CD-ROM, CD-R/RW, DVD-ROM/RAM/RW etc. in optical disk drive, the effective anti-vibration design is so crucial for robust operaton. Especailly when the drive is self-excited by unbalanced disk, internal sled base vibration and its external transmission to the case bring about so severe problem. Generally these two consideration points the practical anti-vibration design process to control thses two conflictive properties using finite element analysis. As an example of the design process, Duro 25 and 40 visco-elastic rubber mount was selected and analyzed. The stiffness obtained from FEM rubber model was well matched with the experiments. Also it was confirmed that the internal and external vibration induced from unbalanced disk have good agreement with experimental results. The proposed design process is adopted to the slim-type optical disk drive.

  • PDF

정면충돌 시 편의자세 승객의 거동 및 상해 연구 (Behavior and Injury Investigation of Reclined Occupants in Frontal Crash)

  • 조영주;백창민;김성호;한경희;김경진;신재호
    • 자동차안전학회지
    • /
    • 제15권4호
    • /
    • pp.95-101
    • /
    • 2023
  • As the popularization of autonomous vehicles is anticipated, it is expected that the variety of passenger postures will diversify. However, the current vehicle safety system is expected to be inadequate for accommodating these diverse passenger postures, particularly in reclined positions where severe injuries have been reported in frontal collisions. Therefore, it is necessary to investigate the biomechanical responses and tolerances of occupants in reclined postures. In this study, the behavior and injuries of a Hybrid-III dummy model in a reclined position are analyzed through frontal collision sled simulations equipped with the semi-rigid seat provided by the previous study, three-point safety belt with pretensioner and load limiter, and airbag models. The results are evaluated by comparing thouse reponses with post-mortem human surrogate (PMHS) data, and the findings are expected to be applicable to the basic design of a new restraint system suitable for various postures in autonomous vehicles.

한국형 봅슬레이화 개발을 위한 구간 시간과 족저압력 분석 (The Analysis of Foot Pressure and Lap Time for the Development of Korean Bobsleigh Shoes)

  • 박종진;김경훈;박승범
    • 한국운동역학회지
    • /
    • 제25권4호
    • /
    • pp.465-474
    • /
    • 2015
  • Objective : A study and development of Korean Bobsleigh athletes's shoe which considers their physical condition has yet to be completed. So this study examines the effects of running shoes used by athletes based on plantar pressure and sprint time in order to provide raw data for the development of bobsleigh shoes suitable for Koreans. Method : The study selected seven bobsleigh athletes as subjects and selected three pairs of spiked running shoes from three companies, which will be referred to as Company N (Type A), Company A (Type B), and Company M (Type C). To analyze sprint time and plantar pressure for each shoe, the subject of the study were instructed to wear the selected shoes and to drag a sled at maximum sprint for 15 meters for 15 meters for in each condition that would be in real bobsleigh competitions. Results : The average sprint intervals for each athlete in each pair of shoes revealed Type C produce the fastest sprint in the order of Type C < Type A< Type B. Shoe Type C also had the largest contact area in order of Type C > Type B > Type A (p<.01). None of the three shoe types seem to yield a distinct advantage in terms of maximum average pressure or maximum pressure. Conclusion : In the future, functional analysis should be carried out by comparing the material properties, hardness, and toe spring of shoes based on the Type C shoe from Company M in order to develop bobsleigh shoes suitable for Koreans.

모노스키 유압 완충장치 특성에 따른 탑승 안락감 평가 (Comfort Analysis of Mono-ski with Hydraulic Absorber)

  • 조현석;박진국;김규석;문무성;김창부
    • 대한기계학회논문집 C: 기술과 교육
    • /
    • 제3권2호
    • /
    • pp.131-140
    • /
    • 2015
  • 하반신 마비환자가 스키를 탈 수 있도록 고안된 모노스키는 스키 플레이트 위에 좌석이 설치된 형태의 썰매이다. 스키를 탈 때 설면으로부터 전달되는 충격은 정상인의 경우 다리관절의 거동에 의하여 흡수되지만 모노스키의 경우에는 좌석에 탑승한 인체에 그대로 전달된다. 상용화된 대부분의 모노스키에는 이를 보완하기 위하여 스키 마운트와 시트 간에 링크 메커니즘과 충격완충장치가 설치되어 있다. 본 연구에서는 유압 실린더가 장착된 모노스키의 주행 시뮬레이션을 수행하고 불규칙한 표면 주행 중 발생하는 진동 충격 가속도를 분석하여 탑승자의 안락감을 평가할 수 있는 모델을 개발하였다. 안락감 평가방법은 국제 규격인 BS6841 을 사용하였다. 개발 모델을 이용하여 유압 완충장치의 노즐조절에 따른 안락감을 평가하였다.

경량 휠체어 탑승자의 차량 전방충돌시 안전성 평가 (A Safety Assessment on Light Weight Wheelchair Occupant in Frontal Crash)

  • 김성민;김성재;강태건
    • 대한의용생체공학회:의공학회지
    • /
    • 제24권1호
    • /
    • pp.15-21
    • /
    • 2003
  • 본 연구에서는 경량휠체어 탑승자의 차량 전방충돌시 안전성 평가를 위하여 동적 슬래드 충격실험을 하였다. 실험은 총 6회 시행하였으며 충격속도는 20g/48 $\pm$2km/h 였고, Hybrid III 50%ile 성인남자 인체모형을 사용하여 두부손상기준(Head Injury Criteria), 목의 굴전모멘트, 축 인장력, 전단력, 흉부 가속도. 두부, 휠체어, 무릎의 전방 쏠림량을 측정하였으며 미국자동차학회 규격인 SAE J2249에서 제안한 동작기준 (Motion Criteria)과 미국 제너럴모터스사의 자체기준(GM-IARV)인 복합상해기준(Combined Injury Criteria)을 이용하여 안전성평가를 하였다. 실험결과는 경량 휠체어 탑승자의 전방 충돌 시 최대 상해치를 100%로 봤을 때 휠체어와 탑승자 거동의 위험도지수 MC는 52%, 탑승자의 상체 위험도지수 CIC는 60.1% 였다.

Biomechanical Effect of In-line Skating Wrist Guards on the Prevention of Wrist Fracture

  • Lim, Tae-Hong;Linda M. McGrady;Peter Hoepfner;Craig C. Young;William G. Raasch;Han, Jung-Soo
    • Journal of Mechanical Science and Technology
    • /
    • 제15권7호
    • /
    • pp.1072-1076
    • /
    • 2001
  • A biomechanical study was conducted in this study to investigate if in-line skating wrist guards can effectively reduce the impact forces so as to protect the wrist from fracture. The forearm specimens with and without wrist guards were dropped using a specially designed sled to simulate the impact on the wrist while falling. A force plate was used to measure the total impact force on the dropping weight whereas a load cell was attached to the proximal end of the specimen and used to quantify the impact transmitted through the wrist joint. From the non-destructive tests, mean peak force measured from a force plate showed no difference between the guarded and unguarded groups whereas mean impulse of the guarded group was significantly greater than that of the unguarded group (p<0.01). Comparing the peak force and impulse measured from the load cell, the peak force of the guarded group was significantly less than that of the unguarded group (p<0.001), while the impulse values were similar. When the specimens were dropped from a higher position (2.5ft ve. 1ft), all unguarded specimens had severe wrist fractures whereas fracture was found in three out of 5 guarded specimens. Comparison of mean peak forces and impulses showed as significant difference between the guarded and unguarded groups only in the mean impulse measured from the force plate. These results suggest that the wrist guard may protect the wrist by attenuating the peak force transmitted to radius and ulnar although it may not be effective when the wrist is subjected to an impact sufficiently large to cause fractures.

  • PDF

모내기전 벼이삭선충(Aphelenchoides besseyi Christie)의 약제방제에 관한 연구 (Studies on the Chemical Control of White-tip Nematode, Aphelenchoides besseyi Christie, before Transplanting)

  • 이영배;박중수;한상찬
    • 한국응용곤충학회지
    • /
    • 제11권1호
    • /
    • pp.37-40
    • /
    • 1972
  • 벼 이삭선충의 효율적이고 능율적인 방제를 위한 약제의 종류 및 방법을 구명하기 위하여 본 시험을 수행하였다. 1. 종자에 대한 약제처리 : 선충피해 종자를 Malathion $80\%$ EC 등 6종의 약제 500, 1,000 배액에 각각 12, 24, 36시간 침종한 후 선충을 Baermmann씨법으로 분리, 조사한 결과 Malathion $80\%$ EC, Sumithion $50\%$ EC, Lebaycid $50\%$ EC, 등의 약제에 12-24시간 처리하는 것이 효과적이었으며 실용성이 있었다. 2. 못자리시기의 입제처리 : $30\times40cm$의 밧드에 피해종자를 파종하고 모내기 15일전에 PSP-204 $5\%$ G등 6종의 약제를 $15g/3.3m^2$의 비율로 시용하여 $20\times18cm$ 폿트에서 재배하여 효과를 조사한 결과 PSP-204 $5\%$ G, Diazinon $3\%$ G, Nemagon $20\%$ G, Terracurr-P $5\%$ G 등의 약제가 이삭선충의 방제효과가 높았다. 3. 모내기전의 침근처리 : 밧드에서 육묘한 피해묘를 모내기직전에 뽑아서 Sumithion $50\%$ EC 등 6종의 약제 1,000배액에 침근처리한 후 $20\times18cm$ 폿트에서 재배하여 효과를 조사한 견과, Sumithion $50\%$ EC, Lebaycid $50\%$ EC Nemagon $80\%$ EC 등의 약제가 가장 효과적이었다.

  • PDF

적응형 듀얼레벨 로드리미터 개발 (The Development of an Adjustable Dual-Level Load Limiter)

  • 이인범;강신유;김석현;유원화
    • 대한기계학회논문집A
    • /
    • 제35권10호
    • /
    • pp.1187-1191
    • /
    • 2011
  • 이 응용논문에는 적응형 로드리미터에 대해 기술되어 있다. 적응형 로드리미터는 안전벨트의 구성품 중 하나이며, 이는 승객의 다양한 체중과 키에 따라 하중량을 고하중과 저하중으로 변환시킬 수 있는 장치이다. 최근, FMVSS 208규정은 다양한 더미크기에 대해 엄격한 안전기준을 요구하고 있다. 이에 따라 우리는 고하중 조건과 저하중 조건 시 각각 더미에 흉부 상해정도를 알아보았고, 실험을 통해서 벤치마킹모델의 하중조건을 확인하였다. 이를 토대로 적응형 듀얼레벨 로드리미터를 개발하여 성능 실험을 실시하였고, 유한요소해석을 통해 설계 개선점을 확인하였다.

Damage and vibrations of nuclear power plant buildings subjected to aircraft crash part II: Numerical simulations

  • Li, Z.R.;Li, Z.C.;Dong, Z.F.;Huang, T.;Lu, Y.G.;Rong, J.L.;Wu, H.
    • Nuclear Engineering and Technology
    • /
    • 제53권9호
    • /
    • pp.3085-3099
    • /
    • 2021
  • Investigations of large commercial aircraft impact effect on nuclear power plant (NPP) buildings have been drawing extensive attentions, particularly after the 9/11 event, and this paper aims to numerically assess the damage and vibrations of NPP buildings subjected to aircrafts crash. In Part I of present paper, two shots of reduce-scaled model test of aircraft impact on NPP were conducted based on the large rocket sled loading test platform. In the present part, the numerical simulations of both scaled and prototype aircraft impact on NPP buildings are further performed by adopting the commercial program LS-DYNA. Firstly, the refined finite element (FE) models of both scaled aircraft and NPP models in Part I are established, and the model impact test is numerically simulated. The validities of the adopted numerical algorithm, constitutive model and the corresponding parameters are verified based on the experimental NPP model damages and accelerations. Then, the refined simulations of prototype A380 aircraft impact on a hypothetical NPP building are further carried out. It indicates that the NPP building can totally withstand the impact of A380 at a velocity of 150 m/s, while the accompanied intensive vibrations may still lead to different levels of damage on the nuclear related equipment. Referring to the guideline NEI07-13, a maximum acceleration contour is plotted and the shock damage propagation distances under aircraft impact are assessed, which indicates that the nuclear equipment located within 11.5 m from the impact point may endure malfunction. Finally, by respectively considering the rigid and deformable impacts mainly induced by aircraft engine and fuselage, an improved Riera function is proposed to predict the impact force of aircraft A380.

유한요소해석을 통한 차량내 복합재 휠체어 고정구의 구조 강도 특성 평가 (Strength Characterisation of Composite Securement Device in the Vehicle by FE Analysis)

  • 함석우;양동규;손승녀;어효경;김경석;전성식
    • Composites Research
    • /
    • 제32권4호
    • /
    • pp.171-176
    • /
    • 2019
  • 본 연구는 복합재를 사용한 휠체어 고정구의 구조 강도 특성에 대하여 평가하였다. 이를 위해 특별교통수단 내 휠체어 고정구의 시험 기준 ISO 10542에 의거하여 전방 충돌 슬레드 유한요소해석을 진행하였고, 이를 통해 얻은 고정구에 작용하는 하중데이터를 휠체어 고정구 유한요소해석의 초기 조건으로 사용하였다. 고정구는 블록, 가이드, 레일로 구성되어 있으며, 이 중에서 레일의 중량 비율이 가장 높기 때문에 탄소섬유 에폭시 복합재를 레일에 적용하는 것이 적합한 것으로 나타났다. 또한 기존의 레일에서 하단 부분을 복합재로 적용한 하이브리드 레일은 기존 SAPH 440으로 제작된 레일의 구조강도와 비슷하게 설계할 경우, 약 27% 정도 경량화를 달성할 수 있는 것으로 나타났다.