• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.01a
• /
• pp.487-488
• /
• 2023

전 세계적으로 도시화가 가속화됨에 따라 도시 내 차량의 수가 지속해서 증가하고 있지만 주차 공간의 부족으로 인해 도심 내 불법주차 문제가 심각해지고 있다. 또한 주차된 차량의 운전자 정보가 노출된 환경으로 인해 개인 정보 유출이 중요한 사회적 문제가 되고 있다. 따라서 본 논문에서는 불법주차 해소와 운전자 개인정보 보호를 동시에 해결하기 위한 자율주행 로봇 시스템을 제안한다. 제안한 방법에서는 정상 주차를 식별하기 방안으로 마커 인식을 적용하였고 ROS 기반 Stella N1을 사용하여 자율주행할 수 있는 로봇을 제작하였다. 또한 전화번호 없이 운전자와 연락을 취할 수 있는 메시지전달 앱을 개발하였다.

• International conference on construction engineering and project management
• /
• 2024.07a
• /
• pp.1283-1283
• /
• 2024

Recently, construction sites have faced significant challenges due to arbitrary changes and poor communication between general contractors and subcontractors. This study proposes a technological solution by integrating Unmanned Ground Vehicles (UGVs) into the existing workflow of apartment construction. By analyzing current processes, we identified a scenario where UGVs, equipped with LiDAR (Light Detection and Ranging) systems, can generate and provide real-time 3D models of construction sites. These models can be linked with extended reality (XR) technology or office PCs for intuitive comparisons between digital and actual site conditions as a digital twin of the construction site. The study suggests an improved construction process that enhances contractors' understanding and on-site efficiency and enables managers to monitor progress effectively. To address challenging terrain on construction sites, a caterpillar driven UGV was developed, equipped with stereo cameras, a LiDAR sensor for scanning and gathering environmental data, and an embedded PC for data processing. Utilizing SLAM (Simultaneous Localization and Mapping) technology, the UGV autonomously navigates and scans the site at night, minimizing disruptions. Additionally, an embedded system analyzes images from stereo cameras to assess the quality of construction, mapping the findings onto 3D models. This innovation allows site managers to efficiently verify construction quality and identify issues without manual inspections, significantly improving site management efficiency.

• Journal of Internet of Things and Convergence
• /
• v.10 no.2
• /
• pp.69-75
• /
• 2024

This paper proposes an IoT-based indoor autonomous driving system that applies SLAM (Simultaneous Localization And Mapping) and Navigation techniques in a ROS (Robot Operating System) environment based on TurtleBot3. The proposed autonomous driving system can be applied to indoor autonomous wheelchairs and robots. In this study, the operation was verified by applying it to an indoor self-driving wheelchair. The proposed autonomous driving system provides two functions. First, indoor environment information is collected and stored, which allows the wheelchair to recognize obstacles. By performing navigation using the map created through this, the rider can move to the desired location through autonomous driving of the wheelchair. Second, it provides the ability to track and move a specific logo through image recognition using OpenCV. Through this, information services can be received from guides wearing uniforms with the organization's unique logo. The proposed system is expected to provide convenience to passengers by improving mobility, safety, and usability over existing wheelchairs.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.3
• /
• pp.353-360
• /
• 2012

This paper describes a SLAM method which estimates landmark locations and robot pose simultaneously. The particle filter can deal with nonlinearity of robot motion as well as the non Gaussian property of robot motion uncertainty and sensor error. The state to be estimated includes the locations of landmarks in addition to the robot pose. In the experiment, four beacons which transmit ultrasonic signal are used as landmarks. The robot receives the ultrasonic signals from the beacons and detects the distance to them. The method uses rang scanning sensor to build geometric feature of the environment. Since robot location and heading are estimated by the particle filter, the scanned range data can be converted to the geometric map. The performance of the method is compared with that of the deadreckoning and trilateration.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.9
• /
• pp.813-821
• /
• 2013

In this paper, we present the development of P-SURO II hybrid AUV (Autonomous Underwater Vehicle) which can be operated in both of AUV and ROV (Remotely Operated Vehicle) modes. In its AUV mode, the vehicle is supposed to carry out some of underwater missions which are difficult to be achieved in ROV mode due to the tether cable. To accomplish its missions such as inspection and maintenance of complex underwater structures in AUV mode, the vehicle is required to have high level of autonomy including environmental recognition, obstacle avoidance, autonomous navigation, and so on. In addition to its systematic development issues, some of algorithmic issues are also discussed in this paper. Various experimental studies are also presented to demonstrate these developed autonomy algorithms.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.6
• /
• pp.711-720
• /
• 2015

Recently many studies of Radar systems mounted on ground vehicles for autonomous driving, SLAM (Simultaneous localization and mapping) and collision avoidance have been reported. Since several pixels per an object may be generated in a close-range radar application, a width of an object can be estimated automatically by various signal processing techniques. In this paper, we tried to attempt to develop an algorithm to estimate obstacle width using Radar images. The proposed method consists of 5 steps - 1) background clutter reduction, 2) local peak pixel detection, 3) region growing, 4) contour extraction and 5)width calculation. For the performance validation of our method, we performed the test width estimation using a real data of two cars acquired by commercial radar system - I200 manufactured by Navtech. As a result, we verified that the proposed method can estimate the widths of targets.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.6
• /
• pp.810-820
• /
• 2014

Recently many studies of Radar systems mounted on ground vehicles for autonomous driving, SLAM (Simultaneous localization and mapping) and collision avoidance are reported. In near field, several hits per an object are generated after signal processing of Radar data. Hence, clustering is an essential technique to estimate their shapes and positions precisely. This paper proposes a method of grouping hits in range-doppler domains into clusters which represent each object, according to the pre-defined rules. The rules are based on the perceptual cues to separate hits by object. The morphological connectedness between hits and the characteristics of SNR distribution of hits are adopted as the perceptual cues for clustering. In various simulations for the performance assessment, the proposed method yielded more effective performance than other techniques.

• Journal of Sensor Science and Technology
• /
• v.32 no.2
• /
• pp.118-123
• /
• 2023

This study presents sensor system for autonomous mobile robot capable of floor-to-floor self-navigation. The robot was modified using the Turtlebot3 hardware platform and ROS2 (robot operating system 2). The robot utilized the Navigation2 package to estimate and calibrate the moving path acquiring a map with SLAM (simultaneous localization and mapping). For elevator boarding, ultrasonic sensor data and threshold distance are compared to determine whether the elevator door is open. The current floor information of the elevator is determined using image processing results of the ceiling-fixed camera capturing the elevator LCD (liquid crystal display)/LED (light emitting diode). To realize seamless communication at any spot in the building, the LoRa (long-range) communication module was installed on the self-navigating autonomous mobile robot to support the robot in deciding if the elevator door is open, when to get off the elevator, and how to reach at the destination.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.1
• /
• pp.36-43
• /
• 2021

In this research, the accuracy of YOLO v3 algorithm in object detection during AGV (Automated Guided Vehicle) operation was investigated. First of all, AGV with 2D LiDAR and stereo camera was prepared. AGV was driven along the route scanned with SLAM (Simultaneous Localization and Mapping) using 2D LiDAR while front objects were detected through stereo camera. In order to evaluate the accuracy of YOLO v3 algorithm, recall, AP (Average Precision), and mAP (mean Average Precision) of the algorithm were measured with a degree of machine learning. Experimental results show that mAP, precision, and recall are improved by 10%, 6.8%, and 16.4%, respectively, when YOLO v3 is fitted with 4000 training dataset and 500 testing dataset which were collected through online search and is trained additionally with 1200 dataset collected from the stereo camera on AGV.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.2
• /
• pp.370-376
• /
• 2022

Smart ships related studies are being conducted in various fields owing to the development of technology, and an engine room patrol robot that can patrol the unmanned engine room is one such study. A patrol robot moves around the engine room based on the information learned through artificial intelligence and checks the machine normality and occurrence of abnormalities such as water leakage, oil leakage, and fire. Study on engine room patrol robots is mainly conducted on machine detection using artificial intelligence, however study on movement and control is insufficient. This causes a problem in that even if a patrol robot detects an object, there is no way to move to the detected object. To secure maneuverability to quickly identify the presence of abnormality in the engine room, this study experimented with whether a patrol robot can determine the shortest path by applying the A* algorithm. Data were obtained by driving a small car equipped with LiDAR in the ship engine room and creating a map by mapping the obtained data with SLAM(Simultaneous Localization And Mapping). The starting point and arrival point of the patrol robot were set on the map, and the A* algorithm was applied to determine whether the shortest path from the starting point to the arrival point was found. Simulation confirmed that the shortest route was well searched while avoiding obstacles from the starting point to the arrival point on the map. Applying this to the engine room patrol robot is believed to help improve ship safety.