• Journal of the Korean Geotechnical Society
• /
• v.23 no.4
• /
• pp.101-112
• /
• 2007

This paper presents the results of an investigation on the ways of utilizing bed sediment as levee materials by laboratory tests. A series of laboratory tests were performed to asses the improved engineering characteristics of bed sediment using admixture cement and weathered granite soils. In this study, several tests such as the grain size analysis test, direct shear test, permeability test, unconfined compression test were peformed. The results of the analyses indicated that the treated bed sediment with cement and weathered granite soils can have the adaptability to the fill material for levee.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.2
• /
• pp.73-82
• /
• 1989

When the flood occurs in the alluvial rivers, the rivers adjust to the flood by means of the mechanism of the river bed variations and its morphological changes to pass that safely, the numerical model was developed to simulate the process of the alluvial river bed variation due to flood wave and carried out by the flood routing for flood wave and the sediment routing for river bed variation. The flood wave, river bed variation, and bed material size distribution may be analysed and predicted by this model. The ability of this model to predict the process of river bed response was proved by the application to the reach from Paldang dam to Indogyo site. In view of the flood analysis considering the sediment process, the effects of river bed variation for the flood routing may be negligible because the river bed variation is smaller than the unsteady flow variation during the same period. By the application of this model, it is shown that, in occurring of sequential flood events, the variation of the river bed and bed material size distribution due to flood wave is more dependent on the first flood event than the latter flood events, and that the river bed variation in this reach of the downstream Han river is dependent on the degradation and the coarsening of bed materials.

• Journal of Korea Water Resources Association
• /
• v.49 no.6
• /
• pp.529-536
• /
• 2016

The existing methods to estimate the maximum scour depth in the bend of steep gravel bed channel have been evaluated by the hydraulic movable-bed experiments. In the $90^{\circ}$ bend steep-slope channel paved with the fluvial gravels which are uniform in size and have a mean diameter of 43mm, the maximum scour depths due to the flow discharge and the gradient of bed slope have been investigated and compared with the scour depth computed from the equations. The local scour has occurred in conditions that the bed slope is steeper than 0.02 and the $F_r$ is greater than 0.95. Except Lacey's equation and Zeller's equation, the existing methods computing the maximum scour depth overestimate the maximum scour depth in the steep channel with the very coarse gravel bed. However, Lacey's equation with the bed material size and Zeller's equation considering the approach channel gradient and the bend angle may be relatively used to estimate the scour depth in bend of the steep gravel-bed river.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.9
• /
• pp.773-779
• /
• 2015

The laser Powder Bed Fusion (PBF) system is currently recognized as a leading process. Due to the various materials employed such as thermoplastic, metal and ceramic composite powder, the application's use extends to machinery, automobiles, and medical devices. The PBF system's surface quality of prototypes and processing time are significantly affected by several parameters such as laser power, laser beam size, heat temperature and laminate thickness. In order to develop a more elaborate and rapid system, this study developed a new PBF system and sintering process. It contains a 3-axis dynamic focusing scanner system that maintains a uniform laser beam size throughout the system unlike the $f{\theta}$ lens. In this study, experiments were performed to evaluate the effects of various laser scanning parameters and fabricating parameters on the fusion process, in addition to fabricating various 3D objects using a PA-12 starting material.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.108-113
• /
• 1993

The material for the machine tool structure should have high static stiffiness and damping in its property to improve both the static and dynamic performances. The static stiffness of a machine tool can be inceased by using either higher modulus material in the structure of a machine tool. However, the machine tool structrue with high stiffness but low damping is vulnerable to vibration at the resonance frequencies of the structure . For the high precision and highsped machine tool structure, therefore, the high damping capacity is most important in order to suppress vibration. The damping of a machine tool can not be increased by increasing the static stiffness. The best way to increase the damping capacity of the machine tool structure is to use a composite material which is composed of on material with high stiffness with low damping and another material with low stiffness with high damping. Therefore, in this paper, the bed of the ultra high precision grinding machine for mirror surface machining of brittle materials such as ceramics and composite materials was designed and manufactured with the epoxy concrete material. The epoxy concrete material was prepared by mixing epoxy resin with different size sands and gravels. The modulus, compressive strength, coefficient of thermal expansion, specific heat, and damping factor were measured by varying the compaction ratio, sizes and contents of the ingredients to assess the effect of the processing parameters on the mechanical properties of the material. Based of the measured properties, the prototype epoxy resin concrete bed for the mirror surface CNC grinding machine was designed and manufactured.

• Korea Journal of Hospital Management
• /
• v.9 no.3
• /
• pp.49-70
• /
• 2004

This study analyzes the effect of separation of dispensary from medical practice on hospital management performance. The results are as follow. The earning ratios of large size hospitals become deteriorated significantly after the separation of dispensary. The growth ratios of revenues from inpatient were unchanged, but the growth ratios of revenues from outpatient of large and middle size hospitals were decreased significantly. Hospitals can't sell the medicines to the outpatient after the separation of dispensary, but they can do to the outpatient. The labor cost ratios of small and large size hospitals are increased significantly after the separation of dispensary. There are two reasons for increase of labor cost ratios. One is the decrease of material cost ratio. The other is the increase of doctor's salary. The material cost ratios of every size hospital are decreased significantly after the separation of dispensary. Because medicines costs of outpatients are decreased. The labor cost and doctors' salary per patient of middle and large size hospitals are increased significantly after the separation of dispensary. And average treatment fees per day of inpatients of middle and large size hospitals are increased significantly after the separation of dispensary. But those of outpatients are decreased significantly. Average numbers of outpatients per bed of small and large hospitals are decreased significantly after the separation of dispensary. And average numbers of inpatients per bed of large hospitals are decreased significantly. In summary, as a consequence of separation of dispensary from medical practice, management performances of large size hospitals become deteriorated significantly.

• Journal of the Korean Geographical Society
• /
• v.33 no.1
• /
• pp.1-16
• /
• 1998

This study surveyed intensively the relationships between grain size of coarse bed materials and some principal factors in channel system, drainage area and channel slope, in Rocky Mountains. The result of this research shows that there are statistically significant relationships between these factors. Generally, the grain size and the channel slope exponentially decreased in the study area with the increase in drainage area. However, there are great differences in grain size and channel slope between upstream and downstream channels. The boundary lines are commonly located at near the mouth of canyon. From these results, it can be concluded that the bed material characteristics and the channel slope are strongly influenced by the geological and geomorphological background of the drainage basin in this study area.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.1
• /
• pp.29-39
• /
• 2011

This study aims to investigate the relationship between the mean diameter of bed material and the tractive force due to flow in domestic natural rivers. To investigate the size of bed material, sampling in the field and estimation of mean diameter have been conducted. The relationship between the mean diameters and tractive force is figured out by calculating tractive force and frictional velocity. The field works have been carried out at 94 location of 18 rivers including 4 large watersheds. In order to determine the quantities of discharge used to calculate the tractive force, the various values of frequency have been estimated and tested. As a result, it is found that the 1.01 year frequency discharge is most appropriate for the bankfull discharge. From results, the relatioship between the mean diameter of bed material the tractive force is presented in this study.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.334-334
• /
• 2017

Representative particle sizes(RPS) are commonly used for particle size distribution of heterogeneous sediment such as bed material. RPS can provide not only information of mean characteristics of sediment, but also other properties like sorting, skewness, kurtosis. For sediment including sand and clay material, RPS is estimated through two steps. The first is experimental step for calculating weight of each size class, the next is interpolation step to get RPS by using the graph plot. At the second step, graph method known as direct reading of value along the interpolation line in the graph plot is commonly used. This method is often time-consuming job. In this study we developed a new program to get RPS by using MS Excel. Simple linear and semi-log interpolation are used. When compared with conventional graph method(direct reading), simple linear shows 5.31%, while semi-log 1.29% of relative difference. We developed MS Excel program for estimation of RPS automatically.

• Journal of Coastal Disaster Prevention
• /
• v.5 no.4
• /
• pp.163-172
• /
• 2018

To propose the design technique and the execution manual of the LWFS(Lightweight Foamed Soil) method using dredged soil, the operation system for the test-bed integrated management, and to establish an amendment for the domestic quantity per unit and specifications, and a strategy for its internationalization. In order to utilize the dredged soil from the coastal area as a construction material, we constructed the embankment with LWFS on soft ground and monitored its behavior. As a result, it can be expected that the use of LWFS as an embankment material on the soft ground can improve the economic efficiency by reducing the depth and period of soil improvement as well as the uses of nearby dredged soil. To verify the utilization of the dredged soil as a material for light-weighted roadbed, soft ground and foundation ground, and surface processing, perform an experimental construction for practical structures and analyze the behavior. It is expected to be able to improve the soft ground with dredged soil and develop technique codes and manuals of the dredged soil reclamation by constructing a test-bed in the same size of the fields, and establish the criteria and manual of effective dredged soil reclamation for practical use. The application technology of the dredged soil reclamation during harbor constructions and dredged soil reclamation constructions can be reflected during the working design stage. By using the materials immediately that occur from the reclamation during harbor and background land developments, the development time will decrease and an increase of economic feasibility will happen. It is expected to be able to apply the improved soil at dredged soil reclamation, harbor and shore protection construction, dredged soil purification projects etc. Future-work for develop the design criteria and guideline for the technology of field application of dredged soil reclamation is that review the proposed test-bed sites, consult with the institutions relevant with the test-bed, establish the space planning of the test-bed, licensing from the institutions relevant with the test-bed, select a test-bed for the dredged soil disposal area.