• Geophysics and Geophysical Exploration
• /
• v.10 no.1
• /
• pp.60-68
• /
• 2007

Conventional analysis of spectral induced polarization (SIP) data consists of measuring impedances over a range of frequencies, followed by spectral analysis to estimate spectral parameters. For the quantitative and accurate estimation of subsurface SIP parameter distribution, however, a sophisticated and stable inversion technique is required. In this study, we have developed a two-step inversion approach to obtain the two-dimensional distribution of SIP parameters. In the first inversion step, all the SIP data measured over a range of frequencies are simultaneously inverted, adopting cross regularisation of model complex resistivities at each frequency. The cross regularisation makes it possible to enhance the noise characteristics of the inversion by imposing a strong assumption, that complex resistivities should show similar characteristics over a range of frequencies. In numerical experiments, we could verify that our inversion approach successfully reduced inversion artefacts. As a second step, we have also developed an inversion algorithm to obtain SIP parameters based on the Cole-Cole model, in which frequency-dependent complex resistivities from the first step are inverted to obtain a two-dimensional distribution of SIP parameters. In numerical tests, the SIP parameter images showed a fairly good match with the exact model, which suggests that SIP imaging can provide a very useful subsurface image to complement resistivity.

• Geophysics and Geophysical Exploration
• /
• v.25 no.3
• /
• pp.99-108
• /
• 2022

Among induced polarization (IP) methods, spectral IP (SIP) uses alternating current as a transmission source to measure amplitudes and phase of complex electrical resistivity at each source frequency, which disperse with respect to source frequencies. The frequency dependence, which can be explained by a relaxation model such as Cole-Cole model or equivalent models, is analyzed to estimate SIP parameters from dispersion curves of complex resistivity employing multi-objective optimization (MOO). The estimation uses a generic algorithm to optimize two objective functions minimizing data misfits of amplitude and phase based on Cole-Cole model, which is most widely used to explain IP relaxation effects. The MOO-based estimation properly recovered Cole-Cole model parameters for synthetic examples but hardly fitted for the real laboratory measures ones, which have relatively smaller values of phases (less than about 10 mrad). Discrepancies between scales for data misfits of amplitude and phase, used as parameters of MOO method, and it is in necessity to employ other methods such as machine learning, which can deal with the discrepancies, to estimate SIP parameters from dispersion curves of complex resistivity.

• Journal of KIISE:Information Networking
• /
• v.34 no.1
• /
• pp.73-80
• /
• 2007

This paper presents an approach to support dynamic QoS(Quality of Service) requirements of largely emerging SIP(Session Initiation Protocol) multimedia applications in broadband access networks. The topology of QoS-enabled broadband access networks and its operational model to support SIP QoS are firstly suggested. And then the procedures to bind QoS-enabled SIP signaling into an IP QoS mechanism are presented. In this paper, DiffServ-based IP QoS architecture is deployed due to the complexity problem of the other IntServ architecture, and COPS(Common Open Policy Service) and COPS-PR protocol based signaling mechanisms are used to support dynamic DiffServ QoS, correspondent with dynamic SIP QoS. The broadband access network is assumed to support rapidly expanding Metro Ethernet 802.1 D/Q QoS, and how to translate SIP QoS parameters into IP DiffServ classes and DiffServ classes into 802.1 D/Q QoS parameters is also presented in this paper.

• Journal of Navigation and Port Research
• /
• v.27 no.1
• /
• pp.41-48
• /
• 2003

The most great GPS is working on CNS(Car navigation System) and Personal terminal, but ocean has not been. First studied GPS is sailing to ship but We have been connivance that The ship is not need detail navigation. Lately, harbor facilities and transportation service in harbors are complication. We have need accurate ship navigation system. In this paper, author developed algorithms of ellipsoid conversion between WGS84 and BESSEL and develope algorithms of map projection between ellipsoid coordinate system, and plane cartesian system. Author used 3-parameter in covering ellipsoids and used TM and UTM projection in converting between ellipsoid and plane cartesian coordinate. And author analyzed errors through static surveying and dynamic surveying of GPS for proving accuracy of GPS sensor, Furthermore author analyzed deflection error of received position. Finally author developed real time ship navigation system using cheep GPS sensor.