• 한국전산유체공학회지
• /
• 제13권4호
• /
• pp.86-95
• /
• 2008

For analyses of multi-phase flows in a water-cooled nuclear power plant, a three-dimensional SIMPLE-algorithm based hydrodynamic solver CUPID-S has been developed. As governing equations, it adopts a two-fluid three-field model for the two-phase flows. The three fields represent a continuous liquid, a dispersed droplets, and a vapour field. The governing equations are discretized by a finite volume method on an unstructured grid to handle the geometrical complexity of the nuclear reactors. The phasic momentum equations are coupled and solved with a sparse block Gauss-Seidel matrix solver to increase a numerical stability. The pressure correction equation derived by summing the phasic volume fraction equations is applied on the unstructured mesh in the context of a cell-centered co-located scheme. This paper presents the numerical method and the preliminary results of the calculations.

• ETRI Journal
• /
• 제29권2호
• /
• pp.231-233
• /
• 2007

One of the drawbacks in an OFDM system is the high peak-to-average power ratio (PAPR). Among a number of techniques to reduce the high PAPR, simple amplitude predistortion (SAP), a form of active constellation extension, has been proposed to effectively achieve the desired PAPR. In this letter, a novel scheme, simple amplitude and phase predistortion (SAPP), is proposed. In SAP the carriers' amplitude is utilized to combat the peak signal. Each amplitude is amplified according to its degree of contribution as a metric. In addition to amplitude, SAPP also utilizes the phase. Simulation results indicate that the proposed scheme provides better PAPR reduction than SAP.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2001년도 정기학술대회
• /
• pp.455-462
• /
• 2001

We propose a new method to evaluate the network reliability which greatly reduces the intermediate steps toward calculations of maximum capacity flow by excluding unnecessary simple paths contained in the set of failure simple paths. By using signed simple paths and signed flow, we show that our method is more efficient than that of Lee and Park (2001a) in the number of generated composite paths and in the procedure for obtaining minimal success composite paths. Numerical examples are given to illustrate the use and the efficiency of the method.

• 대한가정학회지
• /
• 제40권8호
• /
• pp.167-182
• /
• 2002

The purpose of this study is to observe the meaning of Minimalism and the characteristics in modem fashion design. The Minimalism appeared in 1960's has affect on fashion design which are simple miniskirt or Courrage look of those days. It leads a fashion system to the simple style goes with the life style of modem persons although the characteristics are somewhat different the styles in 1960's with those of 1990's. Minimal style is not just simple style but abbriviate expression constrained at the minimum. The styles appeared to be an undecorated simple line which are a sleeveless onepiece, a simple suit with no pocket and no collar and narrow shoulder. Colors are monochrome coordination and pursue a simplicity which is monotone variation. Patterns also appeared to be a geometric or abstract pattern for example check and stripe, which intend to minimum expression. Matirials are hightech glossy coating textures which have a futuristic image. In conclusion, the Minimalism in 1990's appeared to be a post-minimalism associated with postmodernism and a hightech-minimal under the technology development.

• 한국도로학회논문집
• /
• 제15권3호
• /
• pp.23-29
• /
• 2013

PURPOSES: This paper aims to give a guideline and the way to apply the advanced composite materials theory to the road structures with different cross sections to the practicing engineers. METHODS: To simple but exact method of calculating natural frequencies corresponding to the modes of vibration of road structures with different cross sections and arbitrary boundary conditions. The effect of the $D_{22}$ stiffness on the natural frequency is rigorously investigated. RESULTS: Simple method of vibration analysis for calculating the natural frequency of the different cross sections is presented. CONCLUSIONS: Simple method of vibration analysis for calculating the natural frequency of the different cross sections is presented. This method is a simple but exact method of calculating natural frequencies of the road structures with different cross sections. This method is extended to be applied to two dimensional problems including composite laminated road structures.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2000년도 춘계 학술대회논문집
• /
• pp.184-190
• /
• 2000

A well-known pressure correction method, a SIMPLE algorithm is extended to treat compressible flows. Collocated grids are used and density is linked to pressure via an equation of state. The influence of pressure on density in the case of compressible flows is implicitly incorporated into the extended SIMPLE algorithm. The first-order Upwind and high-order Quick scheme are compared with respect to an accuracy and convergence time at all speeds. The extended method is verified on a number of test cases and the results we compared with other numerical results available in the literature. The calculated results show that the Quick scheme improves accuracy at all speed and also reduces the calculation time at supersonic flows, compared with the Upwind scheme.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.397-403
• /
• 2010

The Immersed boundary method(IBM) is one of CFD techniques which can simulate flow field around complex objectives using simple Cartesian grid system. In the previous studies the IBM has mostly been implemented to fractional step method based Navier-Stokes solvers. In these cases, pressure buildup near IB was found to occur when linear interpolation and stadard mass conservation is used and the interpolation scheme became complicated when higher order of interpolation is adopted. In this study, we implement the IBM to an incompressible Navier-Stokes solver which uses SIMPLE algorithm. Bi-linear and quadratic interpolation equations were formulated by using only geometric information of boundary to reconstruct velocities near IB. Flow around 2D circular cylinder at Re=40 and 100 was solved by using these formulations. It was found that the pressure buildup was not observed even when the bi-linear interpolation was adopted. The use of quadratic interpolation made the predicted aerodynamic forces in good agreement with those of previous studies.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 학술대회
• /
• pp.71-78
• /
• 2008

For analyses of multi-phase flows in a water-cooled nuclear power plant, a three-dimensional SIMPLE-algorithm based hydrodynamic solver CUPID-S has been developed. As governing equations, it adopts a two-fluid three-field model for the two-phase flows. The three fields represent a continuous liquid, a dispersed droplets, and a vapour field. The governing equations are discretized by a finite volume method on an unstructured grid to handle the geometrical complexity of the nuclear reactors. The phasic momentum equations are coupled and solved with a sparse block Gauss-Seidel matrix solver to increase a numerical stability. The pressure correction equation derived by summing the phasic volume fraction equations is applied on the unstructured mesh in the context of a cell-centered co-located scheme. This paper presents the numerical method and the preliminary results of the calculations.

• 한국전산유체공학회지
• /
• 제5권2호
• /
• pp.1-8
• /
• 2000

A well-known pressure correction method, a SIMPLE algorithm, is extended to treat compressible flows. Collocated grids are used and density is linked to pressure via an equation of state. The influence of pressure on density in the case of compressible flows is implicitly incorporated into the extended SIMPLE algorithm. The first-order Upwind and high-order Quick scheme are compared with respect to an accuracy and convergence time at all speeds. The extended method is verified on a number of test cases and the results are compared with other numerical results available in the literature. The calculated results show that the Quick scheme improves accuracy at all speed and also reduces the calculation time at supersonic flows, compared with the Upwind scheme.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년 추계학술대회논문집
• /
• pp.71-78
• /
• 2008

For analyses of multi-phase flows in a water-cooled nuclear power plant, a three-dimensional SIMPLE-algorithm based hydrodynamic solver CUPID-S has been developed. As governing equations, it adopts a two-fluid three-field model for the two-phase flows. The three fields represent a continuous liquid, a dispersed droplets, and a vapour field. The governing equations are discretized by a finite volume method on an unstructured grid to handle the geometrical complexity of the nuclear reactors. The phasic momentum equations are coupled and solved with a sparse block Gauss-Seidel matrix solver to increase a numerical stability. The pressure correction equation derived by summing the phasic volume fraction equations is applied on the unstructured mesh in the context of a cell-centered co-located scheme. This paper presents the numerical method and the preliminary results of the calculations.