• 한국응용과학기술학회지
• /
• 제26권2호
• /
• pp.199-204
• /
• 2009

Silicone dioxide absorbed polyoxyethylene alkylether sulfate (EU-S133D) surfactant was prepared. Core-shell polymers of inorganic/organic pair, which have both core and shell component, were synthesized by sequential emulsion polymerization using Acrylate as a shell monomer and potassium persulfate (KPS) as an initiator. We found that when Acrylate core prepared by adding 2.0 wt% EU-S133D, silicone dioxide/Acrylate core-shell polymerization was carried out on the surface of silicone dioxide particle without forming the new silicone dioxide particle during acrylate shell polymerization in the inorganic/organic core-shell polymer preparation. The structure of core-shell polymer were investigated by measuring to the thermal decomposition of polymer composite using thermogravimetric analyzer and morphology of latex by scanning electron microscope(SEM).

• Macromolecular Research
• /
• 제14권6호
• /
• pp.617-623
• /
• 2006

In order to achieve an oriental lacquer (OL) film with a thick consistency, UV-curable silicone acrylate (SA) was added to OL by a dual curing process. The addition of 5 wt% UV-curable SA to the OL fomulation enabled the preparation via a single drying step of a $77{\mu}m-thick$ film exhibiting excellent surface properties. FTIR-ATR was used to investigate the effect of UV-curable SA on the behavior of film formation during curing, and the relaxation behavior of the produced films was investigated by dielectric spectroscopy. Dielectric properties were measured in the frequency range $10^{-2}-10^5\;Hz$ at various temperatures between -100 and $200^{\circ}C$. The results demonstrated that OL modified by UV-curable SA has a higher glass transition temperature and stronger secondary relaxation at a lower temperature than the conventional OL system. The OL film modified with UV-curable SA was presumed to be harder at the surface and tougher than conventional OL film.

• 접착 및 계면
• /
• 제3권4호
• /
• pp.10-18
• /
• 2002

오늘날 플라스틱은 많은 분야에서 매우 중요한 역할을 하고 있으며, 플라스틱의 표면개질을 통해 경도, 마모, 내화학성과 같은 성질을 개선하여 성능을 향상시킬 수 있다. 본 연구의 목적은 polycarbonate, polymethylmethacrylate, acrylonitrilebutadienestyrene과 같은 플라스틱에 적용되는 기능성 하드코팅제를 개발하기 위한 것이다. 하드코팅제를 개발하기 위하여 먼저 실리콘아크릴레이트 올리고머(SAOE)를 합성하고, 이를 함유한 코팅필름을 PC 기재로 하였으며, 도막은 자외선경화에 의하였다. 실험의 결과에 의하면, SAOE를 함유하고 있는 도막의 물성이 SAOE를 함유하고 있지 않은 도막의 물성에 비해서 크게 향상되었다. 특히 코팅 조성물내에 1wt%의 SAOE가 함유되었을 때, 이로부터 얻어진 도막의 경도나 광택이 가장 우수함을 나타내었다.

• Elastomers and Composites
• /
• 제48권4호
• /
• pp.249-255
• /
• 2013

Hydrogen terminated PDMS와 allyl alcohol를 Karstedt's 촉매 존재하에서 hydrosilylation 반응을 이용하여 hydroxypropyl terminated PDMS를 합성한 후, 3관능 HDI isocyanurate trimer와 hydroxyethyl methacrylate를 one-pot 반응으로 초분지 형태의 다관능 실리콘 변성 우레탄 아크릴레이트 올리고머(PUA 올리고머)를 합성하였다. 합성된 PUA 올리고머의 특성은 FT-IR과 GPC를 사용하여 분석하였으며, 그들의 중량평균 분자량은 약 9000 g/mol 이었다. 합성된 PUA 올리고머와 반응성 모노머인 phenylthioethyl acrylate를 여러 가지 조성비로 혼합하고 UV-광경화반응을 이용하여 연성 경화물을 제조하였다. 연성 경화물의 굴절률은 phenylthioethyl acrylate 첨가함에 따라 증가하였으나 반응성 모노머 함량과 관계가 없었다. 또한, 연성 경화필름의 광투과도 변화도 없었다.

• 대한화학회지
• /
• 제64권6호
• /
• pp.354-359
• /
• 2020

This research was conducted to analyze the compatibility of used monomers and produce the high functional contact lens material containing silicone monomers. Silicone monomer (Sil-OH), Trimethylsilylmethacrylate (TSMA) were used as additives for the basic combination of Polyhedral Oligomeric Silsesquioxane (POSS), methyl methacrylate (MMA) and methyl acrylate (MA). And also, the materials were copolymerized with ethylene glycol dimethacrylate (EGDMA) as the cross-linking agent, AIBN (thermal polymerization initiator) as the initiator. It is judged that the fabricated lenses of all combinations are optically excellent and thus used monomers have good compatibility. Measurement of the optical and physical characteristics of the manufactured hydrophilic lens material were varied in each case. Especially TSMA with POSS increases the oxygen permeability and Sil-OH with POSS increases the wettability by the addition of Sil-OH. These materials were considered to have compatibility each other, so it can be used in functional contact lens material.

• 한국응용과학기술학회지
• /
• 제34권3호
• /
• pp.650-656
• /
• 2017

The water-swollen hydrogels containing silicone or fluorine were prepared by copolymerization of 2-hydroxy ethyl methacylate (HEMA) with 3-(trimethoxysilyl)propyl methacrylate(SM) or 2,2,2-trifluoroethyl acrylate(FA). When the content of SM or FA increased in copolymers, there was tendency of water absorbance to decrease, whereas contact angles to increase. The hydrogels containing FA showed 2 ~ 4% higher water content and 4 ~ 5% lower contact angles compared to that of SM. Tensile strengths decreased as the content of SM increased. However, FA exhibited strength of $2.2Mpa/cm^2$ which is similar to $2.3Mpa/cm^2$ of B. FA, which implies comparatively low adherence, hence, showed better protein resistance properties than SM-based hydrogel. The photo-polymerization was also applied instead of thermal polymerization to enhance the energy efficiency. As a result, the reaction yield reached over 95% within 1 minute.

• 폴리머
• /
• 제34권4호
• /
• pp.306-312
• /
• 2010

Triphenylvinylsilane (TPVS) containing vinyl acetate (VAc), butyl acrylate (BA), and Nmethylolacrylamide (NMA) copolymers were prepared by emulsion polymerization. The polymerization was performed at $80^{\circ}C$ in the presence of auxiliary agents and ammonium peroxodisulfate (APS) as the initiator. Sodium dodecyl sulphate (SDS) and Arkupal N-300 were used as anionic and nonionic emulsifiers, respectively. The resulting copolymers were characterized by using Fourier transform infrared spectroscopy (FTIR), gel permeation chromatography (GPC), and dynamic light scattering (DLS). Thermal properties of the copolymers were studied by using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The morphology of copolymers was also investigated by scanning electron microscopy (SEM) and then the effects of silicone concentrations on the properties of the TPVS-containing VAc-acrylic emulsion copolymers were discussed. The obtained copolymers have high solid content (50%) and can be used in weather resistant emulsion paints as a binder.

• 한국재료학회지
• /
• 제30권6호
• /
• pp.273-278
• /
• 2020

This research is conducted to analyze the compatibility of used monomers and produce the high functional hydrogel ophthalmic polymer containing silane and nanoparticles. VTMS (vinyltrimethoxysilane), TAVS [Triacetoxy(vinyl)silane] and cobalt oxide nanoparticles are used as additives for the basic combination of SilM (silicone monomer), MMA (methyl methacrylate) and MA (methyl acrylate). Also, the materials are copolymerized with EGDMA (ethylene glycol dimethacrylate) as cross-linking agent, AIBN (thermal polymerization initiator) as the initiator. It is judged that the lenses of all combinations are optically excellent and thus have good compatibility. Measurement of the optical and physical characteristics of the manufactured hydrophilic ophthalmic polymer are different in each case. Especially for TAVS, the addition of cobalt oxide nanoparticles increases the oxygen permeability. These materials are considered to create synergy, so they can be used in functional hydrogel ophthalmic lenses.

• 한국응용과학기술학회지
• /
• 제24권1호
• /
• pp.10-22
• /
• 2007

To prepare weather-resistant silicone/acrylic resin coatings for an architectural purpose, tetrapolymers were synthesized by a radical polymerization. 3-Methacryloxypropyltrimethoxysilane (MPTS) as a silicone monomer and n-butyl acrylate, methyl methacrylate, and n-butyl methacrylate as acrylic monomers were used. The compositions of monomers were adjusted to fix the glass transition temperature of acrylic polymer for $20^{\circ}C$. The composition of MPTS in the synthesized polymer were varied from 10 wt% to 30 wt%. On the basis of synthesized resin amber paints were prepared and their physical properties and effects for weatherability were examined. The presence of MPTS in silicone/acrylic resins generally resulted in low molecular weight and broad molecular weight distribution, and also lowered the viscosity of the copolymers. The coated films prepared from these resins showed good and balanced properties in general. Adhesion to the substrate was outstanding in particular. Weatherability tests were carried out in three different types such as outdoor exposure, QUV, and SWO. The test results showed that the silicone/acrylic resins containing 30 wt% of MPTS had weather-resistant properties.

• 접착 및 계면
• /
• 제4권1호
• /
• pp.9-17
• /
• 2003

오늘날 산업에서는 환경오염의 줄이고 에너지 절약에 기여할 수 있다는 이유에서 용매를 사용하지 않는 UV 하드코팅재료의 개발이 점차로 많은 주의를 끌고 있다. 본 연구는 실질적으로 산업에 이용될 수 있는 실리콘아크릴레이트(SAOC)를 포함하고 있는 UV 경화코팅제를 개발하고자 수행되었다. 실험의 결과, 수지조성물 중 SAOC의 형태나 농도가 UV 경화필름의 여러 가지 물성에 영향을 주었다. SAOC가 수지조성물에 도입되었을 때 경화된 필름의 물성은 SAOC가 함유되지 않은 도막과 비교하여 개선되었다. 특히, UV 하드 코팅의 내화학성, 내마모성, 내후성과 같은 성질들은 향상되었으며, 코팅된 폴리카보네이트 기재의 충격특성은 코팅되지 않은 PC에 비해 개선되었다. 30 wt% SAOC를 함유하고 있는 경화필름이 가장 좋은 물성을 나타내었다.