• 한국환경과학회지
• /
• 제14권3호
• /
• pp.335-343
• /
• 2005

The objective of this research is to evaluate a feasibility of wastewater reuse by membrane treatment with vibrating membrane separation equipment. Molecular weight of compounds in wastewater, permeability of membrane and retentate characterization after membrane filtration were investigated in order to determine appropriate membrane pore size and materials for wastewater treatment. Selected membrane was evaluated with vibration membrane separation equipment to optimize operating conditions. The following conclusion are drawn. 1. We got as following test results after the distribution of particles in the semiconductor wastewater, are made up of $1\~20{\mu}m$. Si, gold and Al in turn are contained in semiconductor wastewater. 2. Recovery rate is changeless under increasing recovery rate in operation. Though a value can be if pressure can be changed, the highest value of permeate rate is presented in 150 psi. 3. The AS-100(polysulpone) was selected as the most appropriate membranes for the treatment of semi-conductor wastewater to VSEP system. The fouling almost did not occur during this experiments. The analyses of treated water with VSEP system showed conductivity: 0.059,us/cm, TDS: 40mg/l, COD: 20mg/l, SS : 5mg/l, n-Hexane: 8.3mg/l. Comparing previous systems, operating expenses is decreased by more $50\%$.

• 공업화학
• /
• 제1권1호
• /
• pp.52-62
• /
• 1990

폴리카보네이트 폴리올, MDI 및 N-methyldiethanolamine(MDEA)로부터 폴리카보네이트형 우레탄 수지를 합성하고, MDEA의 4차 암모늄염화 반응에 의해서 양이온성 폴리카보네이트 우레탄 수지를 제조하였다. 우레탄 연쇄내 이온기의 함량이 증가함에 따라 인장강도 탄성율은 현저하게 증가되었으나 내가수분해성등은 저하되는 경향을 표시하였다. 에탄올/물 혼합용액 분리실험에서 양이온성 폴리카보네이트형 우레탄 막의 선택도는 20정도였으며, 이때의 분리기구는 carrier mediated transport mechanism을 따른 것으로 생각된다.

• 한국세라믹학회지
• /
• 제46권5호
• /
• pp.462-466
• /
• 2009

We investigated the pore properties of inorganic membranes applied for hydrogen separation industry. Inorganic membranes were derived from polysilazanes. The thermal reactions involved were studied using thermogravimetry(TG) and IR spectroscopy(FTIR) of the solids. To determine the thermal effect of pore properties, polysilazanes were pyrolysed in inert atmosphere. Pore volume and BET surface area showed the maximum value at a pyrolysis temperature of $500^{\circ}C$. For amorphous SiCN membrane derived from polysilazanes, selectivity of $H_2/N_2$ was 4.81 at $600^{\circ}C$.

• 한국재료학회지
• /
• 제19권12호
• /
• pp.661-666
• /
• 2009

Froth flotation has been carried out in order to produce roasting-molybdenite concentrate from molybdenite ore in the Shin-yeomi mine. In our study, roasting-molybdenite (Mo 0.43%) from Shin-yeomi mine was recovered by varying the conditions of regrinding time, dosage of collector and alkalinity. Liberation and flotation efficiency more were effective at regrinding time of six minutes than at single grinding. Mo recovery curves increased considerably as dosage of kerosene increased, whereas Mo grade curves decreased gradually. The separation efficiency of molybdenite was effective when the dosage of collector (kerosene) was adjusted to 300 g/t. The molybdenite concentrate was agglomerated in the range of pH 5-7 and its separation efficiency increased to pH 9-10. The concentrate of 49.5% Mo grade ($MoS_2$, 82.6%) with 81.5% recovery from Shin-yeomi molybdenite ores was obtained under conditions of 20% pulp concentration, 300 g/t kerosene 325 g/t frother (AF65), 2.5 kg/t depressant ($Na_2SiO_3$), pH 9-10 and four cleaning times. In the future, a trial run that can separate up to 50% Mo grade from Shin-yeomi molybdenite ores will be performed.

• 한국수소및신에너지학회논문집
• /
• 제19권2호
• /
• pp.111-117
• /
• 2008

A Bunsen reaction section is a primary stage of Sulfur-iodine thermochemical hydrogen production cycle. This section is important, because it decides the efficiency of next stages. In order to produce hydrogen very efficiently, the characteristics of Bunsen reaction were investigated via two experimental methods. The one is a phase separation of $H_2SO_4-HI-H_2O-I_2$ mixture system, and the other is a direct Bunsen reaction. The characteristics of each method were investigated and compared. As the result of this study, the amount of HI and $I_2$ in $H_2SO_4$ phase via Bunsen reaction was more decreased than that via $H_2SO_4-HI-H_2O-I_2$ mixture system with increasing $I_2$ concentration. However, the amount of $H_2SO_4$ in $HI_x$ phase via Bunsen reaction was remarkably increased with increasing $I_2$ concentration, while that via $H_2SO_4-HI-H_2O-I_2$ mixture system was decreased. On the other hand, the range of initial composition which is able to separate into two liquid phases without $I_2$ solidification was almost alike.

• Membrane and Water Treatment
• /
• 제9권5호
• /
• pp.317-325
• /
• 2018

Polyvinyl chloride (PVC) ultrafiltration (UF) membrane was modified by silica sol in the coagulation bath during non-solvent induced phase separation (NIPS) process. The effects of silica sol concentrations on the morphology, surface property, mechanical strength and separation property of PVC UF membranes were systematically investigated. PVC membranes were characterized by Fourier transform infrared spectroscopy (FTIR), energy dispersive spectroscopy (EDS), scanning electron microscopy (SEM), contact angle goniometry and tensile strength measurement. The results showed that silica had been successfully assembled on the surface of PVC UF membrane. With the increase of silica sol concentration in the coagulation bath, the morphologies of PVC UF membranes changed from cavity structure to finger-like pore structure and asymmetric cross-section structure. The hydrophilicity and permeability of PVC UF membranes were further evaluated. When silica sol concentration was 20 wt.%, the modified PVC membrane exhibited the highest hydrophilicity with a static contact angle of $36.5^{\circ}$ and permeability of $91.8(L{\cdot}m^{-2}{\cdot}h^{-1})$. The structure of self-assemble silica had significant impact on the surface property, morphology, mechanical strength and resultant separation performance of the PVC membranes.

• 한국병원경영학회지
• /
• 제7권3호
• /
• pp.84-101
• /
• 2002

This study estimated the influence of 'the separation of prescribing and dispensing roles' (SPD) policy, which implemented in July 2000, on the community pharmacies in Korea, by using data on the revenues and expenditures in the previous researches. We first assumed the rate of drug price differential was 20% with four different models which was based on various data of studies carried out in the similar period. Later, we applied different rates for the sensitivity analysis. According to the results, all community pharmacies made the net profit of 118.9 billion won (0.552 million won monthly per one pharmacy) after the SPD policy. The ratio of net profit to net sales dropped by 7.41%p from 22.19% to 14.78%. Additional sensitivity analysis indicated there were wide range of differences about whether net profit or net gain, and that extent which either existed.

• 한국병원경영학회지
• /
• 제8권4호
• /
• pp.121-148
• /
• 2003

This study is designed to evaluate the contents of the separation of prescribing and dispensing roles(SPD) policy based on the theoretical backgrounds. The results are as follows; Considering the purpose of SPD policy, 'increasing the efficiency in manpower management by separating the role of medical doctor and pharmacist and improving the quality of SPD service through specialization of function' as a policy objective is valid and very important agenda in health care. But the objectives are not working well by no keeping the detail means to actualize it. Also, some policy objectives are unclear or inappropriate and it makes the focus of that policy obscure or misleads inadequate policy alternatives. In terms of means of policy, it is evaluated to have some limits in effectiveness, efficiency, equity, rationality, technical feasibility, economic feasibility, administrative feasibility, social and time feasibility. In conclusion, it's necessary to investigate the some problem mentioned in this paper with empirical evidence. Also, it should be needed to improve the validity of policy by correcting policy objectives and means in execution of policy.

• 분석과학
• /
• 제8권3호
• /
• pp.299-304
• /
• 1995

정지상으로서 N, N'-bispalmtoyl 1, 12-diaza-3, 4:9,10-dibenzo-5, 8-cyclopentadecane (hexadecyl $NtnOenH_4$)-octadecylsilanized silicas(ODS)와 이동상으로 물을 사용하여 Ba(II), Cr(II), Fe(II) 및 Cu(II)의 흡착특성을 조사하였다. 수용액상 Ba(II), Cr(II), Fe(II) 및 Cu(II)의 결합상수와 흡착도를 조사한 결과 그 순위는 Ba(II)$NtnOenH_4$-octadecylsilanized silicas(ODS)에 흡측되는 금속이온의 농도 증가는 cation chelation mechanism에 의해 설명할 수 있었다. 또한 수용액상에서 Ba(II), Cr(II), Fe(II) 및 Cu(II)이 혼합된 용액에서 Cu(II)의 분리효율이 다른 이온들에 비해서 좋게 나타남을 알 수 있었다.

• 폴리머
• /
• 제30권2호
• /
• pp.152-157
• /
• 2006

수산기말단 폴리부타디엔(hydroxy-terminated polybutadiene: HTPB) 폴리올을 이용한 수분산 폴리우레탄(water-home polyurethane: WPU)의 제조에서 HTPB와 poly(propylene glycol)(PPG)을 혼합 사용한 음이온계 WPU와 쯔비터이온계 WPU를 제조하고 이들의 특성을 조사하였다. WPU 제조 시 HTPB 함량이 증가하면 입자 크기는 커지는 경향을 보이고, 폴리우레탄의 연질부와 경질부의 상분리는 증가하였다. 음이온계 WPU에 비하여 쯔비터이온계 WPU는 건조 필름의 분자간 수소 결합이 강해지는 경향을 나타내었다. 음이온계 및 쯔비터이온계 WPU는 공통적으로 건조 필름이 HTPB 함량이 폴리올 중 25 wt%일때 실험 범위에서는 신율과 인장 강도가 최대값을 보였으며, 이러한 특성은 폴리우레탄의 연질부와 경질부 사이의 미세 상분리를 반영한 것으로 판단되었다.