• 한국재료학회지
• /
• 제6권3호
• /
• pp.264-274
• /
• 1996

자체연소반응법에 의하여 탄화붕소(B4C)를 합성함에 있어서 자체적으로는 반응이 이루어지지 않아서 간접점화법인 화학로법(Chemical Furnace)으로 합성을 하였으며, 성형압력과 몰비를 변수로 하여 연소온도 및 연소속도의 변화를 측정하였다. 성형밀도가 이론밀도의 70%에서 연소온도와 연소속도가 가장 높았으며, 몰비에 대한 영향은 표준비였을 때 연소온도와 연소속도가 가장 높았다. 그리고 성형밀도에 따른 입자의 크기변화는 성형밀도가 높을수록 입자의 크기는 작아졌으며 따라서 비표면적은 커졌다.

• 제어로봇시스템학회논문지
• /
• 제5권4호
• /
• pp.481-488
• /
• 1999

A thermal model based on the chamber geometry of the industry-standard AST SHS200MA rapid thermal processing system has been developed for the study of thermal uniformity and process repeatability thermal model combines radiation energy transfer directly from the tungsten-halogen lamps and the steady-state thermal conducting equations. Because of the difficulties of solving partial differential equation, calculation of wafer temperature was performed by using finite-difference approximation. The proposed thermal model was verified via titanium silicidation experiments. As a result, we can conclude that the thermal model show good estimation of wafer surface temperature distribution.

• 분석과학
• /
• 제35권5호
• /
• pp.189-196
• /
• 2022

When cationic basic compounds are chromatographed using hydro-organic mobile phase, the presence of anionic free silanols in the silica-based stationary phases results in broad and asymmetrical peaks. The addition of an ionic reagent to the mobile phase prevents analytes from accessing free silanols, improving peak shape. In this study, the chromatographic behavior of salbutamol sulfate as a basic compound was investigated under various conditions, including the use of different columns, mobile phases, and ion-pair reagents such as triethanolamine (TEA) and sodium heptane sulfonate (SHS). The retention and peak shape of chromatograms were both evaluated. The results show that pre-conditioning the column with TEA and including it in the mobile phase can prevent cationic analytes from accessing anionic silanols, resulting in improved peak shape. Furthermore, buffering the mobile phase is an important factor in keeping the pH constant throughout the process. The chosen method was validated in part. This study could be helpful for researchers and analyst to solve such problems with cationic basic components.

• 제어로봇시스템학회논문지
• /
• 제6권9호
• /
• pp.831-835
• /
• 2000

The uniformity of themperature on a wafer is a wafer is one the most important parameters to conterol the RTF(Rapid Thermal Process) with proper input signals. It is impossible to achieve the uniformity of temperature without the exact estimation of temperature ar all points on the wafer. There fore, it is difficult to understand the internal dynamics as well as the structural complexities of the RTP, which is aprimary obstacle to measure the distributed temperatures on the wafer accurately. Furthermore, it is also hard to accomplish desirable estimation because only a few pyrometers are available in the general equipments. In the paper, a thermal model based on the chamber grometry of the AST SHS200 RTP system is developed to effectively control the thermal uniformity on the wafer. First of all, the estimation method of one-point measurement is developed, which is properly extended to the case of multi-point measurements. This thermal model is validated through simulation and experiments. The proposed work can be utilized to building a run-by -run or a real-time control of the RTP.

• 한국세라믹학회지
• /
• 제34권5호
• /
• pp.473-482
• /
• 1997

Titanium carbide(TiC) has a poor sinterability due to the strong covalent bond. Thus, it is generally fabricated by either hot pressing or pressureless-sintering at elevated temperature by the addition of sintering aids such as nickel(Ni), molybdenum(Mo) and cobalt(Co). However, these sintering methods have the following disadvantages; (1) the complicated process, (2) the high energy consumption, and (3) the possibility of leaving inevitable impurities in the product, etc. In order to reduce above disadvantages, we investigated the optimum conditions under which dense titanium carbide bodies could be synthesized and sintered simultaneously by high pressure self-combustion sintering(HPCS) method. This method makes good use of the explosive high energy from spontaneous exothermic reaction between titanium and carbon. The optimum conditions for the nearly full-densification were as follows; (1) The densification of sintered body becomes high by increasing the pressing pressure from 400kgf/$\textrm{cm}^2$ upto 1200 kgf/$\textrm{cm}^2$. (2) Instead of adding the coarse graphite or activated carbon, the fine particles of carbon black should be added as a carbon source. (3) The optimum molar ratio of carbon to titanium (C/Ti) was unity. In reality, titanium carbide body which were prepared under optimum conditions had relatively dense textures with the apparent porosity of 0.5% and the relative density of 98%.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.276-279
• /
• 2002

$Bi_{2}Sr_{2}CaCu_{2}O_{x}$ was prepared by the conventional method of solid state reaction and SHS method. The samples were annealed in different atmosphere in order to examine the influence of atmospheres on the carbon contents in the $Bi_{2}Sr_{2}CaCu_{2}O_{x}$ compound. The lowest carbon content in $Bi_{2}Sr_{2}CaCu_{2}O_{x}$ could be attended when the sample was annealed in $O_{2}$ at $800^{\circ}C$ for 100 hours. The $CO_{2}$ in air pollute the samples and increase the carbon content in the sintering process. The critical current density of the $Bi_{2}Sr_{2}CaCu_{2}O_{x}$ samples will decrease with the increasing carbon contents in the samples. The impurity carbon will deposit in the grain boundary, which makes critical current density lower.

• 한국학교보건학회지
• /
• 제24권2호
• /
• pp.181-189
• /
• 2011

Purpose: The purpose of this study was to identify the trend of overseas school health indicators and to investigate indicators comparable internationally. Methods: Using the key words, school, health, indicators and policy through formal literature and web sites, the resources were used after the completeness of resources such as the presence of author, year published and place, and reproducibility was evaluated. Results: In overseas, the interest of school health indicators has increased gradually since 1960. Quality indicators as well as quantitative indicators are important as the good school health indicators. The overseas school health indicators have been very comprehensive, not only including students, but also including the expanded population such as school personnel, parents, family and community, process and outcomes, policies, social and cultural environment. The trend of school health research is from traditional issue-based to indicatorbased which makes comprehensive interpretation including development of school health service and life satisfaction. Among internationally comparable indicators, Health Behaviour in School-aged Children (HBSC) and Global School-based Student Health Survey (GSHS) were chiefly for students' health and behavior level, and the School Health Service Survey (SHS) was for school health service personnel and policy. Conclusion: Characteristics of overseas school health indicators were expanded population, and comprehensive and internationally comparable indicators. Therefore, Korea school health indicators need to be comprehensive using expanded population and qualitative indicators, and consider standardized indicators comparable internationally.

• 한국결정성장학회지
• /
• 제15권6호
• /
• pp.269-275
• /
• 2005

Ni/Ni-aluminide//Ti/Ti-aluminide 경사기능 층상 복합재료를 박막 hot press법을 이용하여 제작하였다. NiAl과 $TiAl_3$ 금속간화합물 층이 자전고온합성반응을 통해 비교적 두껍게 형성되었고, 얇고 연속적인 $Ni_3Al$과 TiAl 층이 고상 확산을 통해 형성되었다. 파괴저항은 하중 방향이 crack arrester인 경우가 금속 층이 균열의 성장을 방해하기 때문에 crack divider 방향인 경우보다 높다. $Ni_3Al$과 NiAl 금속간화합물 층은 각각 벽개파괴와 입계파괴 거동을 보였고, $TiAl_3$층의 파괴 형태는 입내벽개파괴이었다. Ni/Ni-aluminide 층에서 관찰되는 기공과 금속 층과 금속간화합물 층의 미결합 부위가 낮은 파괴저항의 원인으로 판단된다. Acoustic emission (AE) 원파형 해석을 통해 제작된 복합재료의 파괴특성을 고찰하였다.

• 한국분말재료학회지
• /
• 제25권3호
• /
• pp.251-256
• /
• 2018

We report the feasibility of TaC production via self-propagating high temperature synthesis, and the influence of the initial green compact density on the final composite particle size. Experiments are carried out from a minimum pressure of 0.3 MPa, the pressure at which the initial green body becomes self-standing, up to 3 MPa, the point at which no further combustion occurs. The green density of the pellets varies from 29.99% to 42.97%, as compared with the theoretical density. The increase in green density decreases the powder size of TaC, and the smallest particle size is observed with 1.5 MPa, at $10.36{\mu}m$. Phase analysis results confirm the presence of the TaC phase only. In the range of 0.3-0.5 MPa, traces of unreacted Ta and C residues are detected. However, results also show the presence of only C residue in the matrix within the pressure range of 0.6-3.0 MPa.