• Journal of the Ergonomics Society of Korea
• /
• v.30 no.3
• /
• pp.395-401
• /
• 2011

Objective: This study examined the effects of working chair that was developed for farmers who work in grapevine's cluster thinning. Background: Agricultural work involves some of the nation's highest occupational risk exposures. Fruit cultivation has been recognized as one of the most hazardous crops in which to work. Grapevine cluster thinning task involve activities related to the main risk factors associated with upper limb work-related musculoskeletal disorders. Method: An experiment was designed to test the working chair. Six healthy male($25.8{\pm}4.9years$) were selected as the subjects for this study. Electromyography(EMG) was used to monitor the muscles activity, and Electro-goniometer was used to measure the ranges of motions of the elbow, trunk and knee. Subjective test was also carried out to examine discomfort body parts and their pain intensity. A grapevine's working space was built for the experiment and working chair was installed on it. In order to examine the muscle activity and range of motion, subjects used to the working chair for 30 minutes for each experimental condition. Another test without working chair was also performed for comparison. %MVC was used to quantify the level of muscle activity. Results: Decreases of muscle activity was found in all leg muscles and significant decrease of muscle activity was found in left Gastrocnemius. The range of motion of the trunk and knee also decreased when working chair used. Discomfort in lower back, thigh and shank region were reduced significantly. However, in upper limbs muscle activity tended to increase in working chair compared with conventional task. Conclusion: Improvement for cushion in seat back and pan required to reduce discomfort in buttocks. Application: Overall findings verified that the working chair might help to prevent upper limb and lower back MSDs based on the current study. These results can be practically used for work improvement for the grapevine growers to prevent MSDs.

• Korean Journal of Agricultural Science
• /
• v.48 no.1
• /
• pp.133-140
• /
• 2021

The aim of this study was to evaluate the growth performance between two different crossbred strains of Korean native chickens denoted as 1A and 2A compared to white semi broilers and Ross (RR) from hatching to 40 days. In total, 576 one-day-old chicks were allocated in a completely randomized design to give 18 replicate cages each (eight chicks per cage). The two-phase feeding program consisted of the starter (day 1 - 21: Crude protein [CP] 20% and metabolizable energy [ME], 3,050 kcal·kg^-1) and the grower (day 22 - 40: CP 18%, 3,100 kcal·kg^-1). The results revealed that 1A and 2A had a lower (p < 0.05) body weight (BW) from day 1 to day 40 compared with the other groups. A lower (p < 0.05) average daily gain (ADG) was observed in 1A and 2A during the entire period when compared with the other groups. The 1A and 2A groups had the minimum (p < 0.05) average daily feed intake (ADFI) compared with the other groups for the whole period. The RR had an improved (p < 0.05) FCR compared with the other groups during the whole period. The 1A and 2A groups were observed to have the lowest (p < 0.05) shank length compared with the other groups during the entire period.

• Korean Journal of Agricultural Science
• /
• v.48 no.4
• /
• pp.719-727
• /
• 2021

This study was conducted to evaluate the effects of mixed and separate gender feeding on the growth performance and carcass traits of Korean native chickens (KNC) compared to white semi-broilers (WSB) and a commercial broiler (CB) from hatching to 35 days. Here, 240 chicks were used with eight birds per cage in a randomized design with six replicates per breed. For the KNC lines, three groups of males (KNC-M), mixed-gender birds (KNC-FM) and females (KNC-F) were used. The two-phase feeding program used here consisted of a starter phase (days 1 - 21: crude protein [CP] 20% and metabolizable energy [ME], 3,050 kcal·kg^-1) and a grower phase (days 22 - 35: CP 18%, 3,100 kcal·kg^-1) for a commercial broiler. The WSB and CB were fed the only starter commercial diet. Fresh water and feed were provided ad-libitum. The results revealed that the KNC group had a lower (p < 0.05) body weight (BW) from day 7 and day 35 compared to that of the CB. Furthermore, the KNC group showed a lower (p > 0.05) average daily gain (ADG) relative to that of the CB during the entire experimental period. No difference (p > 0.05) was observed in the shank length among the treatments. There were also no significant differences in the growth performance or carcass traits between the KNC-M and WSB groups or in the genders of the KNC group.

• Journal of Veterinary Clinics
• /
• v.41 no.3
• /
• pp.170-177
• /
• 2024

An adult male dog was presented for hemorrhagic pericardial effusion. Echocardiography and computed tomography revealed nodule-like lesions on the pericardium. Cytology of pericardial effusion and excisional pericardial lesions indicated neoplastic effusion. Histopathology indicated an inflamed neoplasm with a primary differential diagnosis of hemangiosarcoma and malignant mesothelioma (MM). Immunohistochemistry showed that atypical cells were positive for cytokeratin and vimentin, but negative for CD31, strongly favoring pericardial MM. Postoperative NT-proBNP level remained increased, which led to the administration of epirubicin to minimize potential cardiotoxicity. During the 4 cycles of epirubicin treatment, a total cumulative dose of 108 mg/m² was administrated and no effusion recurrence was observed. After a month post-completion of chemotherapy, however, pleural effusion was detected with cardiac masses. The owner requested no further diagnostic investigations and chemotherapy. Due to deteriorating conditions, the dog died 132 days after the first presentation. Our case is the first notable attempt to treat canine malignant mesothelioma with epirubicin, providing the clinicopathologic, diagnostic routine, and clinical course of the affected dog.

• Korean Journal of Poultry Science
• /
• v.15 no.1
• /
• pp.1-19
• /
• 1988

A study was carried out to investigate meat production ability of Korean native Ogol fowl (Natural Monument No, 265). The aims of this study were to provide basal data necessary for preserve of purebred and improvement of meat production ability of this breed. A total 300 chickens were used in this study. All the chickens were ad libitum fed broiler starter during period from 0 to 4 weeks of age and broiler finisher during period from 5 to 16 weeks of age. The investigated items are as follows; body weight; growth rate: weight of edible end inedible parts; and body shape components. The results obtained are summarized as follows. 1. Average body weight in male, female, and unsexed, of native Ogol fowls were $659.0{\pm}154.9$, $588.3{\pm}68.0$ and $623.7{\pm}121.9$ at 8 weeks of age, and $938.1{\pm}72.6$, $810{\pm}104.4$ and $874.1{\pm}109.4$g at 10 weeks of age, respectively. 2. The growth rates, unsexed, during periods 2~4, 4~6, 6~8 and 8~10 weeks of age were 166, 106, 41 and 40%, respectively. 3. The growth pattern of total edible parts in both sexes were highly significant by weeks. Total weight of edible parts in male and female were $395.4{\pm}$ and $355.6{\pm}42.0$g at 8 weeks of age, $597.5{\pm}$47.2 and $518.7{\pm}98.5$69.7g at 10 weeks of age. Percentage of total edible parts, unsexed, were 60~63% of body weight during periods from 8 to 10 weeks of age. 4. Edible giblet, unsexed, at age of 8 and 10 weeks were 4~6% of body weight. 5. Percentage of body weight of inedible part were on the decreased by weeks. The amount of blood blooded, feather plucked, inedible viscera and total inedible parts, unsexed, at 8 weeks of age were 4, 7, 12 and 31% of live body weight, respectively. 6. Except breast angle and shank diameter, the other body shape components significantly grew from 2 to 10 weeks of age. Different between male and female at 8 weeks of age were significant in breast girth, keel length, drumstick girth and shank diameter. 7. In both sexes, highly significant differences were found in the correlation coefficients between live body weight and several other body shape component, i. e., breast girth, drumstick girth, and edible part.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.1-6
• /
• 1976

This paper is the third one of the study on balanced type oscillating mole-drainer, the first one was presented in No 9. Gyeongsang College Report and the second one in Vol. 17, No.4 of the KSAE. In the first part of this study, the characteristics of traction forces between the nonoscillating earth working equipments and oscillating ones was compared. A model of the balanced type oscillating mole-drainer, which composed of a mechanism that may reduce the machine vibration, was designed following the dimensional analysis and similitude technique. The model test was carried out to clarify the balancing mechanism of the oscillating parts and other parts of the machine. In the light of the results from the model tests, a prototype machine was made for experimental purpose. Results from the field test by a reported in the near future. In the second report, the model tests were carried out under the same soil conditions, i.e, . oscillating frequency, running velocity, and oscillating amplitude, etc. It was clear that use of balanced type oscillating model could substantially reduce the vibration of the whole system of the machine, when compared with the nonoscillating type model. In this paper(the third report), results of investigation on the traction force, power requirement, and moment. etc, is presented. Analysis of variance technique was used for analyzing the effect of the frequency, amplitude, and running velocity on the draft force, torque, power requirements, and moments. The results obtained from the model tests are as follows, 1) By practicing a balanced-type oscillating mole-drainer, it was possible to reduce the traction resistance by 55.1-61. 2 percent of traction resistance, however, was 1.75 - 1.95 times greater than the value of resistance which was induced by use of a mole-drainer with single bullet. The resistance of rear shank against soil was considered as a main causing factor of the above results. 2) As the oscillation frequency was increased, the traction resistance was decreased. Considering on the effect of oscillation the greater the amplitude, and the slower the running velocity was, the greater the reduction ratio of traction resistance was. 3) The ratio of the traction resistance of oscillating mole-drainer to that of non-oscillating one could be represented as a function of dimensionless variable (V/$Af$). The results from the tests were well agreed with the reported results from the experim ents on oscillation plow or hoe. 4) By taking a lower value of (V/$Af$), reducing the traction resistance was possible. This fact meant, however, that the efficiency of mole drain practice would be lower. 5) It was experimentally confirmed under the same condition of soil that the variable (R/$rD1^3$) could be represented as a function of a variable($V^2/gD$) when a non\ulcornerocillating mole-drainer was used. 6) When a oscillating mole-drainer was used, the variable(R/$rD_1^{3}$) could be represented as a function of two variables ($v^2/gD_1$) and (V^2/gD_1$). 7) The torque was not affected by a change of frequency. However, a relation of proportionality existed between torque and amplitude, running velocity, and ratio of bullet diameter. When a balanced type oscillating mole-drainer with two bullets was used, torque was increased by 52.8-78. 4 percent and total power requirement was also increased. 8) Total power requirement was increased linearly in accordance with the increasing frequency, 41.96 percent of total power was used for oscillating action. The magnitude of total power requirement was 1. 8-9. 4 times greater than that of a non-oscillating mechanism. In the view point of power requirement, it was not advisable to increase the frequency, amplitude, running velocity, and ratio of bullet diameter at the same time. 9) Only the positive moment occured in the rear shank. Change of the diameter of a rear bullet, could not affect the balancing against the soil resistance. It was necessary for rear bullet to have a large resistance against soil only when the rear bullet was in backward motion. 10) Within an extent of the experimental base, optimum limits for several design factors were A=0.5cm, $f$=22.5Hz, V=O. 05m/sec, and $\lambda$=1.0 By adapting these values traction resistance was reduced by 40 percent and vibration acceleration wa s reduced by 60 percent. Even though the total , power requirements for operating a balanced type oscillation mechanism was greater ~than that of non-oscillating one, using a oscillating mechanism would be more effective. Because a balanced type oscillating mechanism is used, tractive resistance will be reduced and then the lighter . tractive equipment could be used.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.5
• /
• pp.740-746
• /
• 2009

Rusa deer are the only viable commercial tropical deer species for farming in the tropics because of their hardiness, adaptability and prolific characteristics. Twelve entire rusa stags were slaughtered according to halal procedure and used for carcass evaluation and cutability studies. Three carcass categories; large (46 to 55 kg), medium (36 to 45 kg) and small (25 to 35 kg) were developed for rusa stags. This study indicated that entire Moluccan rusa deer stags with mean live weight ranges from 50 to 80 kg and age groups of 15 to 29 months showed dressing percentage of 58 to 62%. Carcass conformation of rusa stags showed significantly (p<0.05) higher forequarters portion than hindquarters for medium (mean weight, 40.8 kg) and large (mean weight, 50.0 kg) carcass categories. The large carcass category was significantly (p<0.05) bigger in hindquarters portion (47.3% vs. 45.4%) than the medium carcass category. This study showed that medium and large carcass categories are more suitable for boneless cuts since the muscles were larger than small carcasses and easy for deboning. Stag carcasses showed higher proportion of the musculature in the high-priced areas of the carcass such as in round cuts. Bone-in cuts are more suitable for small carcasses since the muscles were smaller and difficult to debone (mean weight, 30.5 kg). About 90% of total deer carcasses in the small carcass category were developed into retail bone-in cuts (excluding 9.9% of breast, shank and trimming). The carcass characteristics and cutability information derived from this study can be used as a basis for a venison marketing strategy for deer farming and production in the tropics.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.956-959
• /
• 2004

Recently the monitoring system of tool setting in high speed precision machining center is required for manufacturing products that have highly complex and small shape, high precision and high function. It is very important to reduce time to setup tool in order to improve the machining precision and the productivity and to protect the breakage of cutting tool as the shape of product is smaller and more complex. Generally, the combination of errors that geometrical clamping error of fixing tool at the spindle of machining tool and the asynchronized error of driving mechanism causes that the run-out of tool reaches to 3$^{\sim}$20 times of the thickness of cutting chip. And also the run-out is occurred by the misalignment between axis of tool shank and axis of spindle and spindle bearing in high speed rotation. Generally, high speed machining is considered when the rotating speed is more than 8,000 rpm. At that time, the life time of tool is reduced to about 50% and the roughness of machining surface is worse as the run-out is increased to 10 micron. The life time of tool could be increased by making monitoring of tool-setup easy, quick and precise in high speed machining tool. This means the consumption of tool is much more reduced. And also it reduces the manufacturing cost and increases the productivity by reducing the tool-setup time of operator. In this study, in order to establish the concept of tool-setup monitoring the measuring method of the geometrical error of tool system is studied when the spindle is stopped. And also the measuring method of run-out, dynamic error of tool system, is studied when the spindle is rotated in 8,000${\sim}$60,000 rpm. The dynamic phenomena of tool-setup are analyzed by implementing the monitoring system of rotating tool system and the non-contact measuring system of micro displacement in high speed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1066-1069
• /
• 2004

Recently the monitoring system of tool setup in high speed precision machining tool is required for manufacturing products that have highly complex and small shape, high precision and high function. It is very important to reduce time to setup tool in order to improve the machining precision and productivity and to protect the breakage of cutting tool as the shape of product is smaller and more complex. Generally, the combination of errors that geometrical clamping error of fixing tool at the spindle of machining center and the asynchronized error of driving mechanism causes that the run-out of tool reaches to 3∼20 times of the thickness of cutting chip. And also the run-out is occurred by the misalignment between axis of tool shank and axis of spindle and spindle bearing in high speed rotation. Generally, high speed machining is considered when the rotating speed is more than 8,000 rpm. At that time, the life time of tool is reduced to about 50％ and the roughness of machining surface is worse as the run-out is increased to 10 micron. The life time of tool could be increased by making monitoring of tool-setting easy, quick and precise in high speed machining center. This means the consumption of tool is much more reduced. And also it reduces the manufacturing cost and increases the productivity by reducing the tool-setup time of operator. In this study, in order to establish the concept of tool-setting monitoring the measuring method of the geometrical error of tool system is studied when the spindle is stopped. And also the measuring method of run-out, dynamic error of tool system, is studied when the spindle is rotated in 8,000 ∼ 60,000 rpm. The dynamic phenomena of tool-setup is analyzed by implementing the monitoring system of rotating tool system and the noncontact measuring system of micro displacement in high speed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.6
• /
• pp.652-656
• /
• 1997

This study was conducted to determine the relationships between abdominal temperature (Tabd) and some thermoregulatory responses, such as heat production (HP), heart rate (HR), respiration rate (RR), temperature of external ear tract (Tee), comb surface temperature (Tcs) and shank skin temperature (Tss), for revealing the role of deep body temperature in the thermoregulation of broiler chickens. Tabd was divided into 5 zones of 40-41, 41-42, 42-43, 43-44 and $44-45^{\circ}C$, and maintained for 3 hours in each zone by varying environmental temperature from 11 to $33^{\circ}C$. HP and HR had a greater increase with Tabd above $42.5^{\circ}C$. RR increased markedly with Tabd above $41.5^{\circ}C$, and reached a maximum when Tabd was at $42.5^{\circ}C$, then began to decrease. In addition, HP and HR increased significantly with decrease RR during the decreasing phase of panting. Tcs and Tss changed rapidly with Tabd when Tabd was below $41.5^{\circ}C$, and increased more slowly above $41.5^{\circ}C$. Tee was lower than Tabd, and its increase was less than that of Tabd. These results suggest that changes in thermoregulatory responses are induced by an increase in abdominal temperature. Tabd increases to adjust the ratio of sensible and evaporative heat loss when Tabd is below $42.5^{\circ}C$, while the ability in body temperature regulation gradually disappears when abdominal temperature exceeds $42.5^{\circ}C$ and heat balance can not be maintained.