• Title/Summary/Keyword: SHANK3

Search Result 160, Processing Time 0.027 seconds

Reliability and Validity of Knee Joint Angles of the Elderly Measured Using Smartphones

  • Lee, Daehee;Han, Seulki
    • Journal of International Academy of Physical Therapy Research
    • /
    • v.11 no.3
    • /
    • pp.2107-2112
    • /
    • 2020
  • Background: With the increasing elderly population, the need for gait analysis of these elderly individuals is also increasing. Most devices are costly and not portable; however, smartphones using built-in sensors capable of measuring motion and are easily available. Objectives: To examine the reliability and validity of knee joint angles of the elderly using smartphone measurements during walking. Design: Quasi-experimental research. Methods: Sixteen elderly people, aged 65+ and living in Daejeon and Chungbuk, South Korea, participated in the study. Electrogoniometers and smartphones were attached to the thigh and the side and front of the shank of each subject, respectively, using double-sided tape, an arm band, and an elastic band. Each subject completed two sets of at least seven gait cycles (14 steps). Results: Both the smartphones and electrogoniometers exhibited high agreement in terms of their primary and secondary measurements (ICC>.75). The agreement between the smartphones and electrogoniometers was also high in terms of both the primary and secondary measurements (ICC<.60). Conclusion: These results indicate that smartphones can be costly equipment cannot, even though they cannot completely replace existing clinical-grade devices. Their utility is emphasized herein for measuring knee joint angles of the elderly during walking.

The Historical Study and Standard Traditional Cooking Methods of Sinsulro (신선로(열구자탕) 조리법의 역사적 고찰과 전통적 표준조리법의 제시)

  • 한복진
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.5 no.3
    • /
    • pp.317-337
    • /
    • 1995
  • "Sinsulro(신선로)" is the famous soup of Cho-sun Dynasty Royal Cuisine, and the original food name is "Yulgujatang(열구자탕)". The first record is on [Sumunsasul] (1740) and the origin history related with Hirang-Jung is on [Headongjukji] and [Chosunyorihak]. From the analysis with Royal banquet menu and 16 kinds of old culinary literatures, "Sinsulro" are contained 54 and 70 material items and used variety cooking methods. Soup base of "Sinsulro" is well boiled meat, shank, brisket, stomach and intestine of beef with water, Some of beef is made meatball and seasoned raw meat. Beef marrow and tripes and liver are sauted with egg. Dried abalone and sea cucumber are soaked in water and then cutting slices after well boiled. Sliced white fish fillet are sauted with egg. Egg white and egg yolk made to thin sheet on pan with oil. Dropwort made to one sheet with flour and egg. Radish are boiled with meat soup and other vegetable are cooked with boiled or sauted. Seeds of pinenut, gingko, walnut are used of decorative seasonings. Filling mehtods of the Sinsulro casserole, the first layer is seasoning raw beef meat, 2nd layer is cooked slice of meat and radish, 3rd layer is rectangle pieces of egg sheet and sauted fish and intestines of beef. The top layer is decorated with meatball and naked nuts. After hot soup is poured until top of the materials, buning charcoal put into the center fire place and then served.o the center fire place and then served.

  • PDF

Three-dimensional finite element simulation and application of high-strength bolts

  • Long, Liji;Yan, Yongsong;Gao, Xinlin;Kang, Haigui
    • Steel and Composite Structures
    • /
    • v.20 no.3
    • /
    • pp.501-512
    • /
    • 2016
  • High-strength structural bolts have been utilized for beam-to-column connections in steel-framed structural buildings. Failure of these components may be caused by the bolt shank fracture or threads stripping-off, documented in the literature. Furthermore, these structural bolts are galvanized for corrosion resistance or quenched-and-tempered in the manufacturing process. This paper adopted the finite element simulation to demonstrate discrete mechanical performance for these bolts under tensile loading conditions, the coated and uncoated numerical model has been built up for two numerical integration methods: explicit and implicit. Experimental testing and numerical methods can fully approach the failure mechanism of these bolts and their ultimate load capacities. Comparison has also been conducted for two numerical integration methods, demonstrating that the explicit integration procedure is also suitable for solving quasi-static problems. Furthermore, by using precise bolt models in T-Stub, more accurately simulate the mechanical behavior of T-Stub, which will lay the foundation of the mechanical properties of steel bolted joints.

A parametric study of bolt-nut joints by the method of finite element contact analysis (유한 요소 접촉 해석법에 의한 나사 체결부 설계 개선에 관한 연구)

  • 이병채;김영곤
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.13 no.3
    • /
    • pp.353-361
    • /
    • 1989
  • A parametric study of load distribution in bolt-nut joints is performed by the method of finite element contact analysis. The contacting surface is assumed unbonded and frictionless. Multi-body contact analysis is performed in elastic region under the assumption of axi-symmetric stress state. Load acting on the first thread from the fastened plate is much greater than that on the other threads in the standard setting. But the load distribution is shown to be improved by making the center of contact force acting on the nut surface move outwards. Such a modification is possible by enlarging the gap between bolt shank and fastened plate or by inserting suitable washers. Shape modification of the standard nut by the making a groove and a step on the nut surface is also suggested, which results in almost uniform load distribution and considerable decrease in the maximum stress of the joint.

Effects of Gymnasts Shoes on Risk Factors of Anterior Cruciate Ligament Injuries during Drop Landing in Female Gymnasts (여자 체조선수들의 드롭 랜딩 시 체조화 착용유무가 전방십자인대 부상 위험요인에 미치는 영향)

  • Lim, Bee-Oh;Ryu, Young;Kim, Kew-Wan
    • Korean Journal of Applied Biomechanics
    • /
    • v.23 no.3
    • /
    • pp.219-223
    • /
    • 2013
  • The purpose of the study was to investigate the effects of gymnasts shoes on risk factors of anterior cruciate ligament injuries during drop-landing followed by vertical jump in female gymnasts. Thirteen female gymnasts were recruited and performed randomly drop-landing followed by vertical jump in height of her knee with and without shoes. Kinematics and ground reaction data were collected to estimate the anterior cruciate ligament injuries risk factors. Data were analyzed with paired samples t-test with Bonferroni correction. Female gymnasts with shoes showed more reduced thigh maximum adduction angle, and knee maximum extension moment than without shoes. Female gymnasts with shoes showed more increased shank maximum abduction angle than without shoes. In conclusion, Female gymnasts with shoes reduced anterior cruciate ligament injuries risk factors.

The Process of the Kinematic Coordination and Control of Dollyochagi Motion in Taekwondo (태권도 돌려차기 동작의 운동학적 협응 및 제어과정)

  • Yoon, Chang-Jin;Chae, Woen-Sik
    • Korean Journal of Applied Biomechanics
    • /
    • v.18 no.2
    • /
    • pp.95-104
    • /
    • 2008
  • The purpose of this study was to investigate kinematic coordination and control of lower segments in skill process. For the investigation, we examined the difference of resultant linear velocity of segments and angle vs angle graph. Novice subjects were 9 male middle school students who has never been experienced a taekwondo and expert subjects were 7 university taekwondo players. We analyzed kinematic variables of Dollyochagi motion through videographical analysis and the conclusion were as follows. 1. Examining the graph of novice subjects' maximal resultant linear velocity of the thigh, shank, and foot segment, as it gets closer to the end of the training, the maximal resultant linear velocity in each segment increased. Statistical analysis showed the following results; thigh segment caused the increase of speed, using the trunk segment's momentum in the latter term of learning, while the shank segment utilized the momentum of the adjacent proximal segment at the beginning of learning, and the foot segment in the middle of learning. 2. Until the point where the knee joint angle is minimum, as the novice group learn the skill, the flexion of knee and hip joints has changed into the form of coordination pattern in phase. On the other hand, the expert group showed continual coordination pattern in phase that the movement sequences were smooth. From the knee joint maximal flexion to impact timing, all novice and expert groups showed coordination pattern out of phase. 3. From the knee joint maximal flexion to impact timing, the ankle joint was fixed and the knee joint was extended to all the novice stages and expert subjects.

Minerals, Total Nitrogen and Free Amino Acid Contents in Shank Bone Stock according to Boiling Time (사골 용출액 중의 무기질, 총질소, 아미노산의 함량 변화)

  • Park, Dong-Yean
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.15 no.3
    • /
    • pp.243-248
    • /
    • 1986
  • This study was examined the contents of calcium, phosphorus, magnesium, sodium, potassium, total nitrogen (total N) and free amino acid in shank bone stock as results of boiling for eight, twelve, sixteen and twenty hours. The results were as follows. 1) Contents of calium, sodium and potassium were increased according to boiling time, Content of calcium was more than two times after boiling for twenty hours as compared with eight hours. The contents of potassium and sodium were increased slightly but that of magnesium was constant in the course of boiling. The content of phosphorus was showed maximum value after toiling for eight hours and was decreased after boiling for twelve hours. 2) The content of total N was increased according to boiling time and showed moximum value after boiling for twenty hours. Total N was extracted more than two times after boiling for twenty hours as compared with eight hours. The content of free amino acid was little at various boiling time. The contents of glycine, glutamic acid and serine were increased according to boiling time. Glycine was the most abundant free amino acid and was followed in order of glutamic acid. alanine and serine.

  • PDF

Dietary Effects of an Animal Fat with High Free- Fatty Acid Content on Feed Utilization and Meat Quality in Broilers (고산가 동물성 지방의 첨가가 육계의 사료이용성과 육질에 미치는 영향)

  • 오미향;지규만;최인숙
    • Korean Journal of Poultry Science
    • /
    • v.12 no.1
    • /
    • pp.7-16
    • /
    • 1985
  • Present experiment was undertaken to compare the effects of two dietary fats whose free fatty acid content was quite different on performances and on meat quality of broilers. Yellow grease or animal fat (trade name) containing 15 or 38.6% free fatty acid, respectively, was added to the broiler starter and finisher diets at levels of 3.0 and 5,0%, respectively. A total of 108, day old, male Maniker(Chunho) broiler chicks was alloted to 3 dietary treatments with 3 replications per treatment and 12 chicks per replication Though control diet was not supplemented with fat, the three dietary groups were made isocaloric and isonitrogenous. All the chicks were ad libitum fed the test diets for 8 weeks. Feed intake and body weight were measured every other week. Shank color was measured at the end of feeding trial by Roche Color Fan. To evaluate meat quality, 7 chicks of mean body weight were selected from each treatment group after the trial. Measurements were made for abdominal fat content, organoleptic scores for thigh and breast, and for contents of total lipids, free fatty acids, iodine values and peroxide values of the breasts. During the period from 0 to 4 weeks of age, the broilers fed the diets added with fats performed the same as those fed the control diet. However, the body weight gam (25%), feed intake (10.8%) and feed efficiency (11.3%) of chicks fed the fat-supplemented diets, during the finisher period (5-8 weeks), appeared significantly improved compared to those of control group (p<0.05). During overall period of 8 weeks, body weight gain, feed intake, and feed efficiency of chicks fed the diets added with fats were, on the average, 16.2. 8.8 and 6.8%, respectively, better than, those of control Monwhile the performance between the chicks fed diets added with the two different fat sources appeared to be of the same tendency. Though the shank pigmentation was not statistically different among the treatments, the chicks fed the fat-supple ented diets tended to have slightly less pigments than the control. Organoleptic scores of thigh or breast of chicks fed the animal fat diet were of the same range as those of the other two groups. The contents of total lipids, free fatty acids, iodine values and peroxide values of breasts from broilers fed the various diets appeared to be in the same ranges among the treatments. The values for control, yellow grease and animal fat groups were 7.77, 6.66 and 6.32% for total lipids, 9.23, 9.7 and 9.31mg oleic acid/g fat for free fatty acids, 65.36, 63.89 and 59.25g/ 100g fat for iodine values, and 9.62, 10.46 and 8.79 meq/kg fat for peroxide values, respect vely. Changes of free fatty acids contents of breast during a storage for 10 da s at 4$^{\circ}C$ were also not different among the dietary groups. From the observations n. this experiment, it seems possible to conclude that the animal fat containing 38.6% free fatty acid can be used as efficiently as yellow grease in broiler diets without any adverse effects on meat quality.

  • PDF

Friction Welding of Dissimilar Hot Die Punch Materials and Its Creep Prediction and Quality Evaluation by AE(I) - FRW and AE+ (열간 금형펀치 제작을 위한 이종재 마찰용접과 고온크리프 실시간 예측 및 AE에 의한 품질평가(Ⅰ) -마찰용접과 AE)

  • Park, Il-Dong;Oh, Sae-Kyoo;Kim, Ji-Su
    • Journal of Ocean Engineering and Technology
    • /
    • v.13 no.3 s.33
    • /
    • pp.77-82
    • /
    • 1999
  • The compleete joining method for dissimilar hot die punch materials and its real-time evaluation method are not available at present. Brazing method has been used for joining them, but it is known that the welded joint by the brazing has the lower bonding efficiency and reliability than the diffusion welding. The friction wleding with a diffusion mechanism in bonding was applied in this study. So, this work was carried out to determine the optimal friction welding conditions and to analyze mechanical properties of friction welded joints of hot die punch materials (STD61 for the blade part of hot die punch) to alloy steel (SCM440 for the shank park of hot die punch) such as plunger. In addition, acoustic emission test was carried out during friction welding to evaluate the weld quality.

  • PDF

Nonlinear finite element analysis of top- and seat-angle with double web-angle connections

  • Kishi, N.;Ahmed, A.;Yabuki, N.;Chen, W.F.
    • Structural Engineering and Mechanics
    • /
    • v.12 no.2
    • /
    • pp.201-214
    • /
    • 2001
  • Four finite element (FE) models are examined to find the one that best estimates moment-rotation characteristics of top- and seat-angle with double web-angle connections. To efficiently simulate the real behavior of connections, finite element analyses are performed with following considerations: 1) all components of connection (beam, column, angles and bolts) are discretized by eight-node solid elements; 2) shapes of bolt shank, head, and nut are precisely taken into account in modeling; and 3) contact surface algorithm is applied as boundary condition. To improve accuracy in predicting moment-rotation behavior of a connection, bolt pretension is introduced before the corresponding connection moment being surcharged. The experimental results are used to investigate the applicability of FE method and to check the performance of three-parameter power model by making comparison among their moment-rotation behaviors and by assessment of deformation and stress distribution patterns at the final stage of loading. This research exposes two important features: (1) the FE method has tremendous potential for connection modeling for both monotonic and cyclic loading; and (2) the power model is able to predict moment-rotation characteristics of semi-rigid connections with acceptable accuracy.