• 한국공작기계학회논문집
• /
• 제12권2호
• /
• pp.23-30
• /
• 2003

It is very important to detect and evaluate the surface or subsurface flaws because of their influences on mechanical properties of materials. Rayleigh wave and creeping wave are commonly used for the detection of surface and subsurface flaws. These techniques, however, have following problems. Each amplitudes are remarkably affected by the surface condition and evaluation of echo pattern is usually difficult because shear wave mode propagate in the material at the same time. On the other hand, surface SH-wave which is horizontally polarized shear wave traveling along near surface layer is an attractive technique for the surface or subsurface material characterization and this technique is useful to solve the problems mentioned above. In this paper, The stability and transmission coefficient of SH waves through a viscous fluid layer is theoretically studied and simulated. Its results agreed well with the theoretical expectation for the experimental verification. These experimental results show that viscosity of couplants, thickness of couplant and surface roughness are closely related to transfer efficiency in surface SH angle beam method.

• 지구물리와물리탐사
• /
• 제21권1호
• /
• pp.33-40
• /
• 2018

이 연구는 한국, 중국, 일본을 포함하는 동아시아 지역의 지각과 최상부맨틀의 SV파 및 SH파 속도구조와 지진파의 속도 방사 이방성(radial anisotropy)을 알아보기 위해 수행하였다. IRIS (Incorporate Research Institutions for Seismology)에서 동아시아에 설치한 광대역 지진관측소에 기록된 지진자료를 사용하여 레일리파와 러브파를 추출하였으며, MFT (Multiple Filter Technique)을 사용하여 각 성분에 기록된 주기 3 ~ 200초 범위의 레일리파와 러브파의 군속도 분산자료를 획득하였다. 수직성분에서 62466개의 레일리파의 분산곡선 측정값을, 접선(transverse)성분에서 54141개의 러브파의 분산곡선 측정값을 얻을 수 있었다. 얻어진 분산자료를 역산하여 속도모델을 구하였고, 역산된 모델을 통해 깊이 100 km 까지의 SV파 및 SH파 속도 구조를 구하였다. SV파와 SH파 속도구조의 경우, 동일하게 깊이 30 km 까지 동해에서 강한 고속도 이상이 나타나며, 30 km 이상의 깊이에서는 중국 남서쪽의 티벳 고원에서 강한 저속도 이상이 나타난다. SH파 속도구조의 경우, 30 km 이상의 깊이에서 동해에서 상대적으로 더 강한 저속도 이상이 나타난다. 그 결과, 지진파 이방성은 평균적으로 동해지역에서 음의 이방성을, 중국 내륙지역에서 양의 이방성이 관측된다.

• 한국철도학회논문집
• /
• 제7권4호
• /
• pp.391-399
• /
• 2004

This paper investigated the dispersion characteristics of horizontal surface waves as means to apply conversional SASW techniques. To verify this proposal, 3D finite element analysis and Transfer matrix solution were performed. SH wave(Love waves) has the some advantages in comparison with Rayleigh wave. Representatively, Love wave has a characteristics not affected by compression wave. These characteristics have the robust applicability for the surface wave investigation techniques. In this study, for the purpose of employing Love wave in the SASW method, the dispersion characteristics of the Love wave was extensively investigated by the theoretical and numerical approaches. The 3-D finite element and transfer matrix analyses for the half space and two-layer systems were performed to determine the phase velocities from Love wave as well as from both the vertical and the horizontal components of Rayleigh wave. Preliminary, numerical simulations and theoretical solutions indicated that the dispersion characteristics of horizontal surface wave(Love waves) can be sufficiently sensitive and appliable to SASW techniques.

• 자원환경지질
• /
• 제27권3호
• /
• pp.281-287
• /
• 1994

이 논문은 transverse 이방성(異方性) 매질내 Love 채널파동 수치해석에 관한 연구를 요약한 것이다. 먼저, 이를 위하여 상기한 매질내 SH파동방정식으로부터 2차 근사 양(陽)유한차분식을 유도하였다. 이 유한차분식은 매 격자점마다 상이한 물성을 정해줄 수 있기 때문에, 복잡한 모델구조를 추가로, 내부 경계조건 처리를 함이 없이, 매우 효율적으로 해석할 수 있을 것이다. 등방성(等方性) 석탄층에 대한 해석결과, 본 연구에서 작성한 탄성파기록이 기존의 Korn and $St{\ddot{o}}ckl$의 것과 본질적으로 동일함을 확인하였다. 다음, 이방성(異方性) 석탄층에 대한 해석에서는, Love 채널파동의 군(群)속도가 석탄층의 수평방향 속도의 증감에 따라 증감됨을 알 수 있었다. 그러나 현재의 연구단계에선, Love 채널파동을 이용하여 저(低) 속도층의 조성(組成), 층서(層序), 균열등에 관한 정보를 이끌어 낼 수는 없었다. 이러한 정보는 석유탐사 및 개발의 측면에서 중요하기 때문에, 앞으로 이와 관련된 채널파동 연구가 기대된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.109-110
• /
• 2011

• Smart Structures and Systems
• /
• 제30권4호
• /
• pp.397-410
• /
• 2022

It is essential to monitor the working conditions of bolt-connected joints, which are widely used in various kinds of steel structures. The looseness of bolts may directly affect the stability and safety of the entire structure. In this study, a guided wave-based method for bolt looseness detection and localization is presented for a joint structure with multiple bolts. SH waves generated and received by a small number (two pairs) of magnetostrictive transducers were used. The bolt looseness index was proposed based on the changes in the reconstructed responses excited by the time reversal signals of the measured unit impulse responses. The damage locations and local damage severities were estimated using the damage indices from several wave propagation paths. The back propagation neural network (BPNN) technique was employed to identify the local damages. Numerical and experimental studies were conducted on a lap joint with eight bolts. The results show that the total damage severity can be successfully detected under the effect of external force and measurement noise. The local damage severity can be estimated reasonably for the experimental data using the BPNN constructed by the training patterns generated from the finite element simulations.

• Structural Engineering and Mechanics
• /
• 제58권5호
• /
• pp.887-903
• /
• 2016

This study analyses the seismic response of a three-dimensional (3-D) rigid massless square foundation resting or embedded in a viscoelastic soil limited by rigid bedrock. The foundation is subjected to harmonic oblique seismic waves P, SV, SH and R. The key step is the characterization of the soil-foundation interaction by computing the impedance matrix and the input motion matrix. A 3-D frequency boundary element method (BEM) in conjunction with the thin layer method (TLM) is adapted for the seismic analysis of the foundation. The dynamic response of the rigid foundation is solved from the wave equations by taking into account the soil-foundation interaction. The solution is formulated using the frequency BEM with the Green's function obtained from the TLM. This approach has been applied to analyze the effect of soilstructure interaction on the seismic response of the foundation as a function of the kind of incident waves, the angles of incident waves, the wave's frequencies and the embedding of foundation. The parametric results show that the non-vertical incident waves, the embedment of foundation, and the wave's frequencies have important impact on the dynamic response of rigid foundations.

• 지구물리와물리탐사
• /
• 제2권4호
• /
• pp.209-214
• /
• 1999

트렌치를 이용하여 다성분 탄성파 탐사에 필요한 횡파를 발생시키는 현장 실험을 2개소에서 실시하였다. 실험결과 1개소에서는 트렌치 연장 방향에 직각 방향으로 양호하게 분극된 횡파를 얻을 수 있었으며 다른 한 곳에서는 횡파 생성에 실패하였다. 시추공 내에 설치한 3성분 지오폰 기록을 필터링, 에너지 balancing, 수평 및 수직 성분 자료의 가$\cdot$감산 등 전처리 과정을 거쳐 P파와 S파를 분리하였고, S파의 직접파 이벤트를 분석하여 매질의 이방성을 관측할 수 있었다. 분석결과에 의하면 $SH_{max}$ 방향이 남북 방향이었으며 이는 시추코어에서 관찰된 파쇄대 절리 방향과 같다는 사실을 확인하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.31-37
• /
• 2000

Metal matrix composites(MMCs) are rapidly becoming one of the strongest candidates for structural materials for many high temperature application. Among the high temperature environment, thermal shock is known to cause significant degradation in most MMC system. Therefore, the nondestructive evaluation on thermal shock damage behavior of SiC/A16061 composite has been carried out using ultrasonic surface and SH-waves. For this study, Sic fiber reinforced metal matrix composite specimens fabricated by a squeeze casting technique were thermally cycled in the temperature range 25~$400^{\circ}C$ up to 1000 cycles. Three point bend test was conducted to investigate the effect of thermal shock damage on mechanical properties. The relationship between thermal shock damage behavior and the change of ultrasonic velocity and attenuation were discussed by considering SEM observation of fracture surface.

• 비파괴검사학회지
• /
• 제10권2호
• /
• pp.38-42
• /
• 1990

The specific strength of the fiber reinforced composite material is closely related to the anisotropy of the material. For the quantitative characterization of the anisotropy in the composite material, applied was CODF concept which was extensively used in the metallic material. As the results, the anisotropy of the material could be quantitatively analysed from the measurement of the phase velocities of the angular dependent $SH_o$ waves.