• Nuclear Engineering and Technology
• /
• v.51 no.6
• /
• pp.1708-1714
• /
• 2019

The purpose of the critical evaluation of the spent fuel pool (SFP) is to verify that the maximum effective multiplication factor ($K_{eff}$) is less than the critical safety limit at 100% stored condition of the spent fuel with the maximum reactivity. At nuclear power plants, the storage standard of spent fuel, ie, the loading curve, is established to prevent criticality from being generated in SFP. Here, the loading curve refers to a graph showing the minimum discharged burnup versus the initial enrichment of spent fuel. Recently, US NRC proposed the new critical safety assessment guideline (DSS-ISG-2010-01, Revision 0) of PWR SFPs and most of utilities in US is following it. Of course, the licensed criterion of the maximum effective multiplication factor of SFP remains unchanged and it should be less than 0.95 from the 95% probability and the 95% confidence level. However, the new guideline is including the new evaluation methodologies like the application of the axial burnup profile, the validation of depletion and criticality code, and trend analysis. Among the new evaluation methodologies, the most important factor that affects $K_{eff}$ is the axial burnup profile of spent fuel. US NRC recommends to consider the axial burnup profiles presented in NUREG-6801 in criticality analysis. In this paper, criticality effect was evaluated considering three profiles, respectively: i) Axial burnup profiles presented in NUREG-6801. ii) Representative PWR axial burnup profile. iii) Uniform axial burnup profile. As the result, the case applying the axial burnup profiles presented in NUREG-6801 showed the highest $K_{eff}$ among three cases. Therefore, we need to introduce a new methodology because it can be issued if the axial burnup profiles presented in NUREG/CR-6801 are applied to the domestic nuclear power plants without any other consideration.

• The Journal of the Korea Contents Association
• /
• v.22 no.5
• /
• pp.367-382
• /
• 2022

This study examined the impact of smart factory's quality factors on the intention to accept Advance Smart Factory(ASF) by mediating Perceived Value(PV) and Smart Factor Performance(SFP) of domestic SMEs that had introduced smart factor. As a result, First, Information Quality(IQ) and Service Quality(SQ) had a significant positive impact on Perceived Value(PV). Second, System Quality(SysQ), IQ, and SQ had a significant positive impact on SFP. Third, PV had a significant positive impact on intention to ASF, and PV and SFP had a significant positive impact on the intention to accept ASP. Also, PV had a mediating effect between SysQ, IS and Perfromance, and PV and Performance had a moderation between SQ and ASF. These results could provide one implication to SMEs that are taking into account to improve their smart factor to be advanced.

• Journal of Korea Multimedia Society
• /
• v.9 no.8
• /
• pp.963-970
• /
• 2006

In this paper, we proposed a motion picture processor for using low-cost color super twisted nematic liquid crystal display(CSTN-LCD). The proposed processor apply a new driving scheme using SFP(Subgroup Frame Pattern), so we extends gray scale and eliminates flicker phenomenon. In addition, we apply the BFI (Black Field Insertion) to the design compensated for response time of a LC (Liquid Crystal). We use an edge enhancement and interpolation method to improve image quality of motion picture. The hardware architecture of proposed processor has been implemented and verified on a prototype FPGA board. The proposed method can be used in the display devices such as PDA(Personal Digital Assistants), mobile phone, and PMP(Portable Multimedia Player).

• Earthquakes and Structures
• /
• v.7 no.6
• /
• pp.1259-1281
• /
• 2014

This research has been conducted in order to investigate the effects of peak ground velocity (PGV) of near-field earthquakes on base-isolated structures mounted on Single Friction Pendulum (SFP), Double Concave Friction Pendulum (DCFP) and Triple Concave Friction Pendulum (TCFP) bearings. Seismic responses of base-isolated structures subjected to simplified near field pulses including the forward directivity and the fling step pulses are considered in this study. Behaviour of a two dimensional single story structure mounting on SFP, DCFP and TCFP isolators investigated employing a variety range of isolators and the velocity (PGV) of the forward directivity and the fling step pulses as the main variables of the near field earthquakes. The maximum isolator displacement and base shear are selected as main seismic responses. Peak seismic responses of different isolator types are compared to emphasize the efficiency of each one under near field earthquakes. It is demonstrated that rising the PGVs increases the isolator displacement and base shear of structure. The effects of the forward directivity are greater than the fling step pulses. Furthermore, TCFP isolator is more effective to control the near field effects than the other friction pendulum isolators are. This efficiency is more significant in pulses with longer period and greater PGVs.

• Korean Journal of Veterinary Research
• /
• v.38 no.3
• /
• pp.553-558
• /
• 1998

Using the previous established multiplex PCR (mPCR), the presence of six kinds of staphylococcal superantigen (SAg) genes was investigated for nineteen Staphylococcus aureus isolates from the commercialized meat sources. As a result, only one isolate from pork among 19 S aureus isolates (5.3%) was confirmed as a potential SAg producer and harbored sec gene. The results in this study suggest that meat may not be major contagion of staphylococcal food poisoning (SFP) in Korea and that staphylococcal enterotoxin type C may be associated with the disease. Also, the mPCR method in this study can be a useful genotypic method which can overcome the typical disadvantages of conventional antibody-based methods due to antigenic homology, and furthur survey on food-borne S aureus isolates can provide the important epidemiological data for SFP in Korea.

• Nuclear Engineering and Technology
• /
• v.54 no.12
• /
• pp.4731-4742
• /
• 2022

RBMK fuel assemblies differ from other LWR FA due to a specific arrangement of the fuel rods, the low enrichment, and the used burnable absorber - erbium. Therefore, there is a challenge to adapt modeling tools, developed for other LWR types, to solve RBMK problems. A set of 10 different depletion simulation schemes were tested to estimate the impact on reactivity and spent fuel composition of possible SCALE code options for the neutron transport modelling and the use of different nuclear data libraries. The simulations were performed using cross-section libraries based on both, VII.0 and VII.1, versions of ENDF/B nuclear data, and assuming continuous energy and multigroup simulation modes, standard and user-defined Dancoff factor values, and employing deterministic and Monte Carlo methods. The criticality analysis with burn-up credit was performed for the SFP loaded with RBMK-1500 FA. Spent fuel compositions were taken from each of 10 performed depletion simulations. The criticality of SFP is found to be overestimated by up to 0.08% in simulation cases using user-defined Dancoff factors comparing the results obtained using the continuous energy library (VII.1 version of ENDF/B nuclear data). It was shown that such discrepancy is determined by the higher U-235 and Pu-239 isotopes concentrations calculated.

• Herbal Formula Science
• /
• v.31 no.1
• /
• pp.53-65
• /
• 2023

Objectives : Present study investigated the hepatoprotective effects and the optimal mixing ratio of fermented Schizandrae Fructus Pomace (fSFP) and Hoveniae Semen Cum Fructus (HSCF) extract combination in carbon tetrachloride (CCl₄)-induced acute liver injury mice. Methods : ICR mice were orally administered with 200 mg/kg of fSFP, HSCF and mixtures of fSFP and HSCF [MSH (w:w); 1:1, 1:2, 1:4, 1:6, 2:1, 4:1, 6:1, and 8:1] for 7 consecutive days. Silymarin (100 mg/kg) was administered as a reference drug. 0.5 mL/kg of CCl₄ was injected intraperitoneally to induce acute liver injury. Body weight gain, relative liver weight, serum chemistry, histopathological analysis, and hepatic endogenous antioxidants capacities were observed. Results : All diverse combinations of MSH significantly reduced relative liver weight increase by CCl₄. In addition, MSH administrations significantly decreased the elevation of serum alanine aminotransferase and aspartate aminotransferase activities by CCl₄. Histopathological observation indicated that all MSH treatments significantly reduced the increase of degenerated hepatocytes, inflammatory cell infiltration, and histological activity index score by CCl₄. Moreover, all MSH administrations reduced the elevation of malondialdehyde contents, and ameliorated the reduction of hepatic glutathione contents, superoxide dismutase activity, and catalase activity. Among the various mixing ratio of MSH combinations, MSH 1:1 and 2:1 showed the most potent anti-oxidative stress, and hepatoprotective effect. Conclusion : Present results suggest that 1:1 and 2:1 combinations of MSH is promising herbal formulation with the hepatoprotective effect against oxidative stress.

• Mycobiology
• /
• v.42 no.1
• /
• pp.59-65
• /
• 2014

Entomopathogenic fungi are promising pest-control agents but their industrial applicability is limited by their thermosusceptibility. With an aim to increase the thermotolerance of Isaria fumosorosea SFP-198, moisture absorbents were added to dried conidial powder, and the relationship between its water potential and thermotolerance was investigated. Mycotized rice grains were dried at $10^{\circ}C$, $20^{\circ}C$, $30^{\circ}C$, and $40^{\circ}C$ and the drying effect of each temperature for 24, 48, 96, and 140 hr was determined. Drying for 48 hr at $10^{\circ}C$ and $20^{\circ}C$ reduced the moisture content to < 5% without any significant loss of conidial thermotolerance, but drying at $30^{\circ}C$ and $40^{\circ}C$ reduced both moisture content and conidial thermotolerance. To maintain thermotolerance during storage, moisture absorbents, such as calcium chloride, silica gel, magnesium sulfate, white carbon, and sodium sulfate were individually added to previously dried-conidial powder at 10% (w/w). These mixtures was then stored at room temperature for 30 days and subjected to $50^{\circ}C$ for 2 hr. The white carbon mixture had the highest conidial thermotolerance, followed by silica gel, magnesium sulfate, and then the other absorbents. A significant correlation between the water potential and conidial thermotolerance was observed in all conidia-absorbent mixtures tested in this study (r = -0.945). Conidial thermotolerance in wet conditions was evaluated by adding moisturized white carbon (0~20% $H_2O$) to conidia to mimic wet conditions. Notably, the conidia still maintained their thermotolerance under these conditions. Thus, it is evident that conidial thermotolerance can be maintained by drying mycotized rice grains at low temperatures and adding a moisture absorbent, such as white carbon.

• Journal of Korean Society of Transportation
• /
• v.20 no.3
• /
• pp.31-39
• /
• 2002

The primary objective of this study is to develop a reliable method for estimating the left turn capacity at the signalized intersection. This study is performed during periods of congestion. Multi left turn lane(bay lane and exclusive lane) approaches are examined. When more than one left turn lane exists, traffic volumes are not distributed equally over each lane. The fundamental approach taken in this study is measuring headways on left turn lanes with altering the bay length from 20m to 120m. Left turn lane is divided into 3 sub-sections in this study. These are SLP section(start-up lost time Period), SFP section(saturation flow period), LSP section(lane selection period). Saturation flow rates are evaluated for each sub section periods. As a results of analysis, it has been confirmed that the left turn capacity can be estimated by left turn bay length and effective green time for left turn. The left turn bay length adjustment factor is suggested in this study.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.6
• /
• pp.859-865
• /
• 2003

Surfactin is a mixture of cyclic lipopeptides built from variants of a heptapeptide and a ${\beta}-hydroxy$ fatty acid produced by several strains of Bacillus sp. Surfactin isoforms produced by endophytic Bacillus sp. CY22 from a balloon flower were isolated and characterized. It was found that the purified surfactin had three isoforms with protonated masses of m/z 1,008, 1,022, and 1,036, and different structures in combination with Na, K, Ca ions using MALDI-TOF MS, ESI-MS/MS, and ICP MS, respectively. In the MS/MS analysis, the isolated surfactin had the identical amino acid sequence (LLVDLL) and hydroxy fatty acids (with 13 to 15 carbons in length), even though isolated from different Bacillus strains. The sfp22 gene, required for producing the surfactin, consisted of an open reading frame (ORF) of 675 bp encoding 224 amino acid residues with a signal peptide of 20 amino acids. The predicted amino acid sequence of sfp22 was very similar to that of Ipa-8.