• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제29권1A호
• /
• pp.107-112
• /
• 2004

We propose the optimum TO-can package design in SFF/SFP optical transceiver modules to improve 3dB-bandwidth. The frequency response of TO-38 package is measured and compared to simulation where the 3dB-bandwidth was 3.5GHz. For a higher operating bandwidth (>15GHz), the new optimized physical geometries of TO-can package such as bonding-wire, lead and material was suggested. The optimal result of simulation shows that TO-can package can be used at a higher bit rate optical module of 10Gbps.

• The Korean Journal of Pesticide Science
• /
• 제3권1호
• /
• pp.90-95
• /
• 1999

For the control of the greenhouse whitefly, Trialeurodes vaporariorum entomopathogenic fungi were isolated from forest soils and infected insects. We selected three strains, which showed high pathogenicity and named as SFB-582(Beauveria sp.), SFP-198(Paecilomyces fumosoroseus) and SFV-1053(Verticillium sp.) respectively. Particularly, at the concentration of $10^{7}$ conidia/ml, P. fumosoroseus SFP-198 had the highest pathogenicity, $91.4{\pm}3.5%$ in laboratory. In glasshouse application, $91.4{\pm}3.5%$ SFP-198 showed high protective values($80{\sim}90%$) regardless of developmental stages, which were similar with that of Verticillium lecanii F-903 already reported. Four kinds of formulations of entomopathogenic fungi were developed, formulation with surfactant Silwet L-77 gave best control of greenhouse whitefly(over 90%). These results suggest that P. fumosoroseus SFP-198 is a promising candidate as a microbial pesticide for the control of T. vaporariorum.

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제44권11호
• /
• pp.1621-1628
• /
• 2015

The immune system plays an important role in maintaining and protecting human health. In the present study, comparison of immuno-modulatory activities between polysaccharides (SFP) and ethanol (SFE) extracts separated from Sargassum fulvellum in macrophages and murine splenocytes were investigated. Immuno-modulatory activities of macrophages were estimated based on cell proliferation, nitric oxide (NO), inducible NO synthase (iNOS), and cytokine production in RAW 264.7 macrophage cells, and lipopolysaccharide was used as a positive control. SFP and SFE treatment did not affect cytotoxicity in RAW 264.7 macrophage cells, and SFP treatment significantly increased NO and cytokine production ($TNF-{\alpha}$, IL-6, and $IL-1{\beta}$), whereas SFE did not contribute to the increase in NO and cytokine production. In the case of splenocytes, SFP treatment increased splenocyte proliferation and also highly increased production of Th-1 type cytokines (IL-2 and $IFN-{\gamma}$) than those of SFE. Through this study, we confirmed that immuno-modulatory activities of Sargassum fulvellum may be due to polysaccharide extracts and this can be a potential nutraceutical.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 한국방사성폐기물학회 2018년도 추계학술논문요약집
• /
• pp.104-104
• /
• 2018

Kori Unit 1 is the first permanent shutdown nuclear power plant in Korea and it is on June 18th, 2017. Spent fuel assemblies began to be discharged from the reactor core to the spent fuel pool(SFP) within one week after shutdown of Kori unit 1 and the campaign was completed on June 27th, 2017. The total number of spent nuclear fuel assemblies in SFP of Kori Unit-1 is 485 and their discharging date is different respectively. So, decay heat was evaluated considering the actual enrichment, operation history and cooling time of the spent fuel assemblies stored in SFP of the Kori Unit-1. The code used in the evaluation is the ORIGEN-based CAREPOOL system developed by KHNP. Decay heat calculation of PWR fuel is based on ANSI/ANS 5.1-2005, "Decay heat power in light water reactors" and ISO-10645, "Nuclear energy - Light water reactors - Calculation of the decay heat power in nuclear fuels. Also, we considered the contribution of fission products, actinide nuclides, neutron capture and radioactive material in decay heat calculation. CAREPOOL system calculates the individual and total decay heat of all of the spent fuel assemblies in SFP of Kori Unit-1. As a result, the total decay heat generated in SFP on June 28th, 2017 when the spent fuel assemblies were discharged from the reactor core, is estimated to be about 4,185.8 kw and to be about 609.5 kw on September 1st, 2018. It was also estimated that 119.6 kw is generated in 2050 when it is 32 years after the permanent shutdown. Figure 1 shows the trend of total decay heat in SFP of Kori Unit-1.

• Journal of Sericultural and Entomological Science
• /
• 제41권3호
• /
• pp.216-221
• /
• 1999

This study was designed to investigate the effects of silk fibroin powder on oxygen radicals and their scavenger enzymes in serum of rats. Sprague-Dawley(SD) male rats (160${\pm}$10 g) were fed experimental diets (SFP-2.5 and SFP-5.0 groups)added 2.5 and 5.0 g/kg BW/day for 6 weeks. Triglyceride levels were remarkably inhibited (15∼25%) in SFP-2.5 and SFP-5.0 groups compared with control group. Hydroxyl radical ($.$OH) formations resulted in a marked decrease (15%∼25%) compared with control group, while superoxide radical and hydrogen peroxide formations resulted in a significant decrease (6∼12% and 10%). Lipid peroxide and oxidized protein (>C=O group) productions resulted in a significant decrease (6∼12% and 6%) compared with control group. Superoxide dismutase (SOD) and catalase (CAT) activities were remarkably increased (35∼55% and 40∼50%), but glutathione peroxidase (GSHPX) activities were significantly increased (13%) compared with control group. These results suggest that anti-aging effect of silk fibroin powder (SFP) may play a pivotal role in attenuating a various age-related changes.

• The Journal of Korean Physical Therapy
• /
• 제34권1호
• /
• pp.6-11
• /
• 2022

Purpose: This study investigated the muscle activity of the lower trapezius (LT) during three different shoulder flexion exercises. Methods: Twenty-three subjects between 20 and 25 years of age were enrolled. The subjects were asked to perform three different shoulder flexion exercises: 1) shoulder flexion in prone (SFP), 2) shoulder flexion in push-up with a swiss ball (SFPUS) and 3) shoulder flexion in a quadruped position with a swiss ball (SFQPS) in random order. The muscle activity of LT during each shoulder flexion exercise was measured by using surface electromyography. The muscle activity of LT was compared using one-way analysis of variance (ANOVA) and Bonferroni post hoc test among three different shoulder flexion exercises. The statistical significance level was set at α=0.01. Results: The muscle activity of LT was significantly different among three different shoulder flexion exercises (SFP, SFPUS, and SFQPS). The LT muscle activity with SFQPS exercise was greater than SFP and SFPUS exercises (p<0.01). There was no significant difference in LT muscle activity between SFP and SFPUS exercises (p>0.01). Conclusion: The LT muscle activity was greater during SFQPS than SFP and SFPUS. Therefore, SFQPS exercise can be recommended for selectively activation of LT muscle.

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.2088-2095
• /
• 2023

The safety of nuclear installations is largely determined by the tightness of fuel elements cladding. As the Fukushima nuclear accident showed, the main task in case of loss of power supply is to ensure reliable removal of residual heat release from spent fuel pool (SFP) with irradiated fuel assemblies (IFAs). The paper presents the results of calculated-experimental studies and thermal-hydraulic modeling of temperature storage modes of IFAs in SFP. Experimental studies of SFP's temperature regime and calculated evaluation of residual heat removal due to the thermal conductivity of building structures surrounding the SFP were performed. To ensure the safe operation of research reactors, it's necessary to know the IFA's residual heat power (RHP) in the reactor and SFP, which is determined depending on the operating time of fuel assemblies (FAs) and the IFAs calculated holding time. The FAs operating time depends on the reactor energy output. The IFAs calculated holding time is determined by the fuel burnup, U-235 mass in the fuel, and reactor utilization factor. The IFAs fuel burnup was calculated using the MCU-PTR program. Also presented are the RHP's calculation results using some of the empirical dependencies. The concept of a passive heat removal system (PHRS) based on thermosyphon's operating principle was proposed.

• Nuclear Engineering and Technology
• /
• 제48권4호
• /
• pp.881-892
• /
• 2016

Following the Fukushima accident and its extended station blackout, attention was brought to the importance of the spent fuel pools' (SFPs) behavior in case of a prolonged loss of the cooling system. Since then, many analytical works have been performed to estimate the timing of hypothetical fuel uncovery for various SFP types. Experimentally, however, little was done to investigate issues related to the formation of a flammable gas mixture, distribution, and stratification in the SFP building itself and to some extent assess the capability for the code to correctly predict it. This paper presents the main outcomes of the Experiments on Spent Fuel Pool (ESFP) project carried out under the auspices of Swissnuclear (Framework 2012-2013) in the PANDA facility at the Paul Scherrer Institut in Switzerland. It consists of an experimental investigation focused on hydrogen concentration build-up into a SFP building during a predefined scaled scenario for different venting positions. Tests follow a two-phase scenario. Initially steam is released to mimic the boiling of the pool followed by a helium/steam mixture release to simulate the deterioration of the oxidizing spent fuel. Results shows that while the SFP building would mainly be inerted by the presence of a high concentration of steam, the volume located below the level of the pool in adjacent rooms would maintain a high air content. The interface of the two-gas mixture presents the highest risk of flammability. Additionally, it was observed that the gas mixture could become stagnant leading locally to high hydrogen concentration while steam condenses. Overall, the experiments provide relevant information for the potentially hazardous gas distribution formed in the SFP building and hints on accident management and on eventual retrofitting measures to be implemented in the SFP building.

• KIPS Transactions on Computer and Communication Systems
• /
• 제2권1호
• /
• pp.15-26
• /
• 2013

IP-based Wireless Sensor Networks (IP-WSNs) are gaining importance for their broad range of applications in health-care, home automation, environmental monitoring, industrial control, vehicle telematics and agricultural monitoring. In all these applications, mobility in the sensor network with special attention to energy efficiency is a major issue to be addressed. Because of the energy inefficiency of networks-based mobility management protocols can be supported in IP-WSN. In this paper we propose a network based mobility supported IP-WSN protocol called Multicasting-based inter-Domain Mobility Management Scheme in Sensor-based Fast Proxy Mobile IPv6 Networks (mSFP). Based on [8,20], We present its network architecture and evaluate its performance by considering the signaling and mobility cost. Our analysis shows that the proposed scheme reduces the signaling cost, total cost, and mobility cost. With respect to the number of IP-WSN nodes, the proposed scheme reduces the signaling cost by 7% and the total cost by 3%. With respect to the number of hops, the proposed scheme reduces the signaling cost by 6.9%, the total cost by 2.5%, and the mobility cost by 1.5%. With respect to the number of IP-WSN nodes, the proposed scheme reduces the mobility cost by 1.6%.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권2호
• /
• pp.577-594
• /
• 2020

Service Function Chaining (SFC) supports services through linking an ordered list of functions. There may be multiple instances of the same function, which provides a challenge to select available instances for all the functions in an SFC and generate a specific Service Function Path (SFP). Aiming to solve the problem of SFP selection, we propose an architecture consisting of distributed SFP algorithm and central control mechanism. Nodes generate distributed routings based on the first function and destination node in each service request. Controller supervises all of the distributed routing tables and modifies paths as required. The architecture is scalable, robust and quickly reacts to failures because of distributed routings. Besides, it enables centralized and direct control of the forwarding behavior with the help of central control mechanism. Simulation results show that distributed routing tables can generate efficient SFP and the average cost is acceptable. Compared with other algorithms, our design has a good performance on average cost of paths and load balancing, and the response delay to service requests is much lower.