• Korean Journal of Poultry Science
• /
• v.18 no.2
• /
• pp.97-119
• /
• 1991

Effect of Streptococcus faecium(SF) and an antibiotic, Colistin(Col), supplemented to diets singly or in combination, on the performances and changes of intestinal population of microflora of broiler chicks studied. A total of 252, day-old chicks(Arbor Acre) of mixed sex(M：F＝1：1) were alloted into six groups. A diet with no Col and SF was referred as a control diet. The basal diets were added with two levels of SF, 0.04 and 0.08%, singly or in combination with Col 10ppm Another diet was prepared by adding only Col 10 ppm. Numbers of the microorganism in diets added with SF 0.04% and 0.08% were 7$\times$10$^{4}$ and 1.4$\times$10$^{5}$ /g diet respectively The diets consisting of corn and soybean meal as major ingredients were fed for a period of seven weeks . During the feeding trial, fresh excreta were sampled at the end of every week in a sterilized condition to count microbial changes from each dietary group. Microbial changes of large intestine were also measured from nine birds sacrificed at the end of the 4th and 7th weeks each time per dietary group. Excreta from all the groups were also collected quantitatively at the end of 3rd and 6th weeks to measure digestibility of the diets, At the end of 7th week, nine birds from each group were also sacrificed to measure weight changes of gastrointestinal tracts . Average body weight gains of broilers fed the diets added with SF 0.08% (2.37kg) or SF 0. 08%+col 10ppm(2.34kg) were significantly larger than that of the control(2.18kg). The weight gains of the other groups were not statistically different from that of the control Feed/gain ratios of the supplemental groups were better than that of control (P＜0.05) except that of birds fed the diet added only with SF 0.04%. Digestibilities of nutrients such as dry matter, crude protein, crude fat and total carbohydrates were not altered by the consumption of the diets added with SF and/or Col throughout the whole feeding period. As expected, the numbers of Streptococci in the excreta from birds fed diets added with SF increased significantly with a statistical difference between groups with SF 0.04% and SF 0.08% most of the time. However. addition of Colistin to the diets supplemented with SF did not give any effects on the number of the microorganism. Numbers of coliforms in the excreta were apparently reduced by feeding the diets added with SF and/or Col(P＜0.05). There were, however, no additive effects observed between the two feed additives in this regard when supplementing Col to the SF diets. Distributions of intestinal microflora exhibited exactly the same pattern as those of the excreta. Length of small intestine of the birds fed diets added with SF 0.08% with or without Col 10 ppm became significantly longer with a range of about 10% than those of the birds fed diets without SF. However, the empty weight of the small inestine of the former group was lighter than that of control These changes resulted in a significant reduction in weight/unit length of the intestine of the birds fed diets supplemented with Col and SF singly or in combination. In overall conclusion, diet added with SF 0.08% appeared most effective in improving broiler performances. Colistin added at a level of 10ppm was not beneficial at all in itself or in combination with SF in terms of broiler performances or changes of intestinal microflora population. The efficacy of SF and Col could be attributed to the changes of wall thickness of the small intestine.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.3
• /
• pp.1-8
• /
• 1997

The surface properties after plasma etching of TiW alloy using the chemistries of BCl$_{3}$ and SF$_{6}$ gases with varying mixing ratio have been investigated using XPS(X-ray photoelectron spectrocopy). The elements existed on the etched sampled have been extracted with BCL$_{3}$/SF$_{6}$ ratio and their chemical binding states have also been analysed. It was confirmed that the thickness of native oxide formed on the TiW films is thinner than 10nm by using Ar sputtering. At the same time, the roughness of etched surface has been esamnied using AFM (atomic force microscopy). on the basis of the basis of this results, the relations between the caanges of oxygen contents detected by XPS and the rouhness of etched surface have been discussed. And the etch rate and etched profile of Tiw films have been examined and the changes of the etch rate and etched prfile have been discussed with XPS results. From XPS results, the role of passivation layer consisted of Ti-S compound with XPS results. From XPS results, the role of passivation layer consisted of Ti-S compound has been proposed. Ti-S compound seems to make a role of passivation layer that surpresses Ti-O formation.ion.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.3
• /
• pp.125-129
• /
• 2015

Energy distribution function for electrons in SF6-Ar mixtures gas used by MCS-BEq algorithm has been analysed over the E/N range 30~300[Td] by a two term Boltzmann equation and a Monte Carlo Simulation using a set of electron cross sections determined by other authors experimentally the electron swarm parameters for 0.2[%] and 0.5[%] $SF_6-Ar$ mixtures were measured by time-of-flight(TOF) method, The results show that the deduced longitudinal diffusion coefficients and transverse diffusion coefficients agree reasonably well with theoretical for a rang of E/N values. The results obtained from Boltzmann equation method and Monte Carlo simulation have been compared with present and previously obtained data and respective set of electron collision cross sections of the molecules.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.3
• /
• pp.67-75
• /
• 2019

The laminar burning velocity of endothermic fuel surrogates is measured in this study, in order to investigate combustion characteristics of aviation fuel after being used as coolant in an active cooling system of a hypersonic flight vehicle. A Bunsen burner was manufactured such that the laminar burning velocity can be taken for two types of surrogate fuels, SF-1 and 2. The results showed that the burning velocity of surrogate fuels was faster at high equivalence ratio conditions than that of the reference fuel (RF), and specifically, the velocity of SF-1 had the maximum value at the highest equivalence ratio compared with those of SF-2 and RF.

• Journal of the Korean Society of Food Culture
• /
• v.27 no.1
• /
• pp.66-74
• /
• 2012

It is well known that sunflower (SF) sprout has more beneficial effects than SF seed due to increased levels of phytochemical components such as vitamins, total phenolics, and isoflavones during germination. This study investigated the physicochemical properties and antioxidative activities of SF seed during both germination and cultivation. In a proximate analysis, the water content of SF groat was 9.17% and then increased to 15.32% on the 11th day after seeding. On a dry weight basis, crude fat content decreased while the contents of carbohydrates, crude protein, and crude ash increased. As cultivation proceeded, the contents of minerals were in decreasing order of K, Mg, Ca, Na, Zn, Fe, Mn, and Cu, in which SF sprout cultivated for 9 or 11 days contained the highest mineral contents. Though vitamin C was not detected on SF groat, the content of vitamin C continuously increased up to the 5th day of cultivation and then decreased gradually. Vitamin E content in SF groat was higher than that in SF sprout. It was also found that the vitamin E content in SF sprout was the highest on the 5th day of cultivation. Daidzin was not detected in SF groat, but its concentration reached a maximum on the 5th day of cultivation in SF sprouts. Furthermore, higher amounts of daidzein were observed on the 3rd, 5th, and 9th days of cultivation. The highest total isoflavone content was observed on either the 3rd or 5th day of cultivation. The highest content of total phenolics was observed on the 5th of cultivation. When DPPH radical and peroxyl radical scavenging activities of SF sprout were measured in order to measure antioxidant efficacy, it was found that 5 day-cultivated SF sprout had the highest scavenging activities. In conclusion, SF sprout cultivated for 9 or 11 days was found to be a good source of minerals. Furthermore, the fifth-day after seeding was the optimal time for the production of SF sprout with effective natural antioxidant activity and high amounts of functional components such as vitamins, total phenolics, and isoflavones.

• Biomedical Science Letters
• /
• v.11 no.3
• /
• pp.327-332
• /
• 2005

Sf21 cells become popular as the host permissive cell line to support the baculovirus AcNPV replication and protein synthesis. The cells grow well on TC-100 medium that contains $0.1\%$ D-glucose as the major carbon source, strongly suggesting the presence of endogenous glucose transporters. However, unlike human glucose transporters, very little is known about the characteristics of the endogenoussugar transporter(s) in Sf21 cells. Thus, some kinetic properties of the sugar transport system were investigated, involving the uptake of 2-deoxy-D-glucose (2dG1c). In order to obtain a true measure of the initial rate of uptake, the uptake of $[^3H]2dGlc$ from both low $(100{\mu}M)$ and high (10 mM) extracellular concentrations was measured over periods ranging from 30 sec to30 min. The data obtained indicated that the uptake was linear for at least 2 min at both concentrations, suggesting that measurements made over a 1min time course would reflect initial rates of the jexpse uptake. To determine $K_m\;and\;V_{max}$ of the endogenous glucose transporter(s) in Sf21 cells, the uptake of 2dG1c was measured over a range of substrate concentrations $(50{\mu}M\~10mM)$ 2dG1c uptake by the Sf21 cells appeared to involve both saturable and non-saturable (or very low affinity) components. A saturable transport system for 2dG1c was relatively high, the $K_m$ value for uptake being < 0.45 mM. The $V_{max}$ value obtained for 2dG1c transport in the Sf21 cells was about 9.7-folds higher than that reported for Chinese hamster ovary cells, which contain a GLUT1 homologue. Thus, it appeared that the transport activity of the Sf21 cells was very high. In addition, the Sf21 glucose transporter was found to have very low affinity for cytochalasin B, a potent inhibitor of human erythrocyte glucose transporter

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.2
• /
• pp.245-251
• /
• 2008

Although many studies have been carried out about binary gas mixtures with $SF_6$, few studies were presented about breakdown characteristics of $SF_6/CF_4$ mixtures. At present study the breakdown characteristics of $SF_6/CF_4$ mixtures in non-uniform field was performed. The experiments were carried out under AC voltage and standard lightning impulse(SLI) voltage. Breakdown characteristics were investigated for $SF_6/CF_4$ mixtures when AC voltages and standard lighting impulse voltage was applied in a needle-plane. The needle-plane electrode whose gap distance was 3 mm were used in a test chamber. $SF_6/CF_4$ mixtures contained from 0 to 100% $SF_6$ and the experimental gas pressure ranged from 0.1 to 0.5 MPa. The breakdown characteristics of $SF_6/CF_4$ mixtures in non-uniform field may be influenced by defects like needle-shaped protrusions. In case of slowly rising SLI voltage and AC voltage it is enhanced by corona-stabilization. This phenomena caused by the ion drift during streamer development and the resulting space-charge is investigated. In non-uniform field under negative SLI voltage the breakdown voltage was increase linearly but under positive SLI voltage the breakdown voltage increase non-linearly. The breakdown voltage in needle-plane electrode displayed N shape characteristics for increasing the content of $SF_6$ at AC voltage. $SF_6/CF_4$ mixture has good dielectric strength and arc-extinguishing properties than pure SF6. This paper presents experimental results on breakdown characteristics for various mixtures of $SF_6/CF_4$ at practical pressures. We could make an environment friendly gas insulation material with maintaining dielectric strength by combing $SF_6\;and\;CF_4$ which generates a lower lever of the global warming effect.

• Journal of radiological science and technology
• /
• v.37 no.2
• /
• pp.109-116
• /
• 2014

Many studies have suggested that in the era of Drug-Eluting Stents(DES) are one of the causes of In-Stent Restenosis(ISR) of Stent Fracture(SF). The present study sought to evaluate clinical characteristics of patients with stent fracture after successful DES implantation. The 4,701 patients were selected for analysis who underwent a follow-up coronary angiography irrespective of ischemic symptoms. The overall incidence of SF was 32 patients(male:female=19:13, Av. age $62.44{\pm}9.8$year, 0.68%). Fractures of Sirolimus-Eluting Stents(SES), Paclitaxel-Eluting Stents(PES), Biolimus A9-Eluting Stents(BES), Everolimus-Eluting Etents(EES), Endothelial Progenitor Cell Capture Stent(EPC) and Zotarolimus-Eluting Stents(ZES) are accounted for 19(59.4%), 9(28.1%), 2(6.3%), 1(3.1%), 1(3.1%) and 0(0%) respectively. SF developed in the left Anterior Dscending(LAD) artery in 16 patients(50%) and in complex(type B2, C) lesions in 25 patients(69.4%). Ten patients were treated with heterogenous DES, the rest being treated with either homogenous DES(3 patients), plain old balloon angioplasty(3 patients), or conservative medical treatment(17 patients). None of the patients with SF suffered from cardiac death during a follow-up period of $32.9{\pm}12.4$ months. The overall rate of DES fracture over up to 3.7 years of follow-up was 0.68% with higher incidence in SES than in PES. SF frequently occurred in the LAD artery and in complex lesions. Of the patients with SF, coronary intervention was performed only when the binary restenosis lesion was significant. During the follow-up, patients with SF have continued on combination antiplatelet therapy. There is a very low rate of major adverse cardiac events(post-detection of SF), especially cardiac death associated with SF.

• Journal of the Geological Society of Korea
• /
• v.54 no.5
• /
• pp.501-511
• /
• 2018

Geoparks are worth preserving in an environmentally and heritage. Monitoring and public attention are essential for the conservation and protection of geoparks. The use of Unmanned Aerial Vehicles and the Structure from Motion algorithm enables effective monitoring of geoparks that are difficult to manage due to their wide range of manpower, and various spatial data derived from SfM can be utilized to improve awareness of geoparks that have been lacking. In order to prove this, firstly, we created the 3D spatial data by using the UAV and the SfM algorithm, which is one of the National geoparks of the Hantan-Imjin River area. Using this 3D data for Virtual Reality and 3D printing. After that, we verified the possibility of promoting the geopark through a simple online survey. Finally, we propose a method to utilize all the generated data from each step to promote and research for geoparks.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.3
• /
• pp.219-224
• /
• 2017

A study on dissimilar friction-welded joints was performed for cam shaft applications using solid bar samples, 20mm in diameter, of forging steel(SF45) and carbon steel(SM45C). The main parameters of friction welding such as tensile tests, Vickers hardness surveys of the bond of area, the heat affected zone (HAZ), and the observation of microstructure were investigated to ensure a good quality of friction welding through visual observations. The specimens were tested as-welded and post weld heat treatment(PWHT). This paper deals with optimizing the welding conditions and analyzing various rotary bending fatigue test(RBFT) properties about heat-treated base metal(BM), as-welded and PWHT. Consequently, two materials for friction welding are strongly mixed with a well-combined structure of micro-particles without any molten material, particle growth, or any defect. Moreover, the fatigue limit of BM(SF45) and PWHT for the RBFT were observed as 180MPa and 250MPa, respectively. It was confirmed that the PWHT causes approximately 40％ improvement in the fatigue limit when compared to the BM(SF45).