• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.94-97
• /
• 2003

A precise fabrication technology of glass is increasingly demanded fer the latest Industrial applications of spherical lenses. micro-optical components, laser applications and so on. Most of cases, the surface roughness of glass is required to be minute for improving the optical characteristics. Then. the machining characteristics of SF-5 glass and quarts glass were studied by using the ELID grinding process to get mirror surface and productivity compared with a general lapping process. A rotary type grinder with ELID generator was used to make the mirror surface of glass and a Mitutoyo surface tester and a nano-hardness tester were also used to measure the grinded surface or glass. As the results of experiments. they showed that the surface roughness(Ra) of SF-5 glass was under 7.8 nm and that of quartz glass was under 3.0 nm using the # 8000 grinder. So, the possibility of highly efficient and accurate surface for optical components can be achieved by the ELID grinding process.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.7
• /
• pp.56-62
• /
• 2003

The precision fabrication of glass is increasingly demanded for the latest industrial applications of spherical lenses, micro-optical components, and so on. In many cases, the surface roughness of glass is required to be minute for improving the optical characteristics. In this paper, machining characteristics of SF-5 glass and quarts glass are studied by using the ELID grinding process to get mirror surface and productivity compared with a general lapping process. A rotary type grinder with air spindle was used for the experiments. Mitutoyo surface tester and AFM were also used to measure the grinded surface of glass. As the results of experiments, they showed that the surface roughness (Ra) of SF-5 glass was under 7.8 nm and that of quartz glass was under 3.0 m using the # 8000 grinder. So, the possibility of highly efficient and accurate surface for optical components can be achieved by the ELID grinding process.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.3
• /
• pp.43-47
• /
• 1985

This paper describes fiber-optic current sensor using SF-4 flint glass for the first time, ails the flint glass has been theoretically analyzed by jones matrix and experimentally verified. Verdet constant of SF-4 flint glass, which determines the sensitivity of current sensor, has been experimentally found as 0.0606(min/g.cm). It is relatively lower value than currently used faraday rotators such as FR-5, SF-6 flint glasses and YIG. The fiber.optic current sensor system was established and the current measurement was performed in the range of 100-600 (A) and 100- 500 (G). It has beenfhown by the experi-mental results that the detector output linearly increased in proportion to the current. Since these experimental results were in good agreement with theoretical results, it has been shown that SF-4 flint glass can be used for the magnetooptic current sensor.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.5
• /
• pp.547-558
• /
• 2023

This research delves into the fabrication of an ultra-high-strength concrete, enriched with oxidized graphene nanoplatelet(GO) and hollow glass powder(HGP), notably eschewing the conventional inclusion of silica fume(SF). The primary objective was to scrutinize the autogenous shrinkage characteristics of this innovative formulation. It was discerned that the NewMix specimen, which incorporated the cGO(sourced from Company C) and HGP, and intentionally bypassed SF, showcased a commendable 13% reduction in autogenous shrinkage relative to the benchmark(Ref) specimenthat incorporated SF. Moreover, the proclivity for crack formation owing to autogenous shrinkage in the NewMix was observed to manifested by NewMix at the juncture of cracking emerged as the apex value. Attributed to the expansive specific surface area and exemplary dispersibility of cGO, it was postulated that the concrete's pore structure benefitted from enhanced infill, leading to a reduction in autogenous shrinkage. Additionally, the cGO integration fortified the concrete's resistance to crack initiation. Consequently, such an enhancement is posied to be pivotal in mitigating crack propagation resulting from autogenous shrinkage in ultra-high-strength concrete.

• 전기의세계
• /
• v.26 no.6
• /
• pp.78-85
• /
• 1977

This paper studies flashover voltage and surface corona loss of A.C and D.C in the mixed gas of air and SF$_{6}$ for solid insulators P.V.C, arcylic, glass and bakelite in two cases. In one case, those solids are covered with transformer oil and the other case, those solids are not covered with it. 1) The flashover voltage for each solids in SF$_{6}$ is more than three times compared with that in the air. The flashover voltage for P.V.C is the highest and then arcylic, glass, bakelite in a decreasing order. 2) The more the amount of SF$_{6}$ in the mixing ratio, the less corona loss. The P.V.C shows the least amount of corona loss and the bakelite the largest. 3) Compared with the corona loss of positive polarity and the negative polarity, the former has less corona loss than the latter. 4) The more the number of flashover discharge, the less insulation of each solids, but in case of bakelite, insulation almost vanishes after a couple of discharge. 5) When each insulator is covered with transformer oil, the flashover voltage generally increases and the corona loss decreases.eases.

• Journal of the Korean Ceramic Society
• /
• v.37 no.11
• /
• pp.1105-1113
• /
• 2000

Bioglass 조성 중 45S5 (46.1SiO$_2$.24.4$Na_2$O.26.9CaO.2.6P$_2$O$_{5}$ : 몰비)를 기본 조성으로 하여 46P4 (46.2SiO$_2$.49.5CaO.4.3P$_2$O$_{5}$ : 몰비), 46SF (46.1SiO$_2$24.4$Na_2$O.16.1CaO.2.6P$_2$O$_{5}$.10.8CaF : 몰비) 그리고 55SF (55.1SiO$_2$.9.2$Na_2$O.27.8CaO.3.4P$_2$O$_{5}$.4.5CaF : 몰비)를 제조하여 tris-완충용액 및 유사 생체용액(simulated body fluid)에서 반응시킨 후 생체활성유리의 표면에 생성되는 아파타이트 결정형에 관하여 연구하였다. 45S5 유리를 tris-완충용액에 반응시켰을 경우 6시간 반응시부터 수산화 아파타이트가 생성되었으나 유사 생체용액에 반응시켰을 경우에는 24시간까지도 수산화 아파타이트 결정이 생성되지 못하고 비정질 상태의 칼슘 인산염만 형성되었다. tris-완충용액에 각 조성의 유리를 200시간 반응시킨 경우 불소를 함유하지 않은 유리에서는 잎사귀 모양의 수산화 아파타이트가, 불소를 함유한 유리에서는 구상의 플루오르 아파타이트가 형성되었다. 그러나 유사 생체용액에 각 조성의 유리를 200시간 반응시켰을 경우 불소를 함유하지 않은 유리에서는 누에고치형의 수산화 아파타이트가 형성되었고 불소를 함유한 유리에서는 무정형의 칼슘 인산염이 생성되었다.

• Korean Journal of Optics and Photonics
• /
• v.9 no.5
• /
• pp.282-290
• /
• 1998

The equivalent lens conversion technique is applied to design achromatic doublet and aplanatic doublet. A thin doublet which has zero axial thicknesses, are corrected for the third order aberrations at first, and the thin doublet is converted into thick lens system by using the equivalent lens conversion. Two types of cemented doublets, the Fraunhofer type and the Steinheil type, are designed by using a crown glass BaK-2 and a flint glass SF-2. In the thin doublet design, there are two achromatic solutions and a aplanatic solution for the both types.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.4
• /
• pp.204-209
• /
• 2006

Photo Resist (PR) ashing process was carried out with the atmospheric pressure- dielectric barrier discharge (ADBD) using $SF_6/N_2/O_2$. Ashing rate (AR) was sensitive to the mixing ratio of the oxygen and nitrogen of the blower type of ADBD asher. The maximum AR of 5000 A/min was achieved at 2% of oxygen in the $N_2$ plasma. With increasing the oxygen concentration to more than 2% in the $N_2$ plasma, the discharge becomes weak due to the high electron affinity of oxygen, resulting in the decrease of AR. When adding 0.5% of SF6 to $O_2/N_2$ mixed plasma, the PR AR increased drastically to 9000 A/min and the ashed surface of PR was smoother compared to the processed surface without $SF_6$. Carbon Fluorinated polymer may passivate the PR surface. It was also observed that the glass surface was not damaged by the fluorine.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.2
• /
• pp.125-133
• /
• 1999

Fluorine-doped $SnO_2$ thin films were deposited on soda-lime glass substrates by reactive DC magnetron sputtering method. Crystallinity as well as electrical and optical properties of $SnO_2$ : F thin film were investigated as the variations of deposition conditions such as substrate temperature, DC Power, $O_2$ gas pressure, $SF_6$ gas pressure. $SnO_2$ : F thin film deposited with 5% $SF_6$ gas pressure showed electrical resistivities of $2.5\times10^{-3}$cm with the average optical transparency (about 80%) These electrical and optical properties were found to be related to the crystallinity of $SnO_2$ : F thin films.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.7
• /
• pp.965-970
• /
• 2016

This study was conducted to determine the effects of freezing and supplementation of molasses (M), lactic acid bacteria (LAB) and LAB+enzyme mixture on chemical and nutritional composition of sunflower silage (SF). Sunflower crops were harvested (at about $29.2%{\pm}1.2%$ dry matter) and half of fresh sunflower was ensiled alone and half was frozen (F) at $-20^{\circ}C$ for 7 days. Silage additives were admixed into frozen SF material. All samples were ensiled in glass jars with six replicates for 90 days. The treatments were as follows: i) positive control (non-frozen and no additives, NF), ii) negative control (frozen, no additives, F), iii) F+5% molasses (FM), iv) F+LAB (1.5 g/tons, Lactobacillus plantarum and Enterococcus faecium, FLAB); v) F+LAB+enzyme (2 g/tons Lactobacillus plantarum and Enterococcus faecium and cellulase and amylase enzymes, FLEN). Freezing silage increased dry matter, crude ash, neutral detergent fiber, and acid detergent lignin. The organic matter, total digestible nutrient, non-fiber carbohydrate, metabolizable energy and in vitro dry matter digestibility were negatively influenced by freezing treatments (p<0.05). In conclusion, freezing sunflower plants prior to ensiling may negatively affect silage quality, while molasses supplementation improved some quality traits of frozen silage. Lactic acid bacteria and LAB+enzyme inoculations did not effectively compensate the negative impacts of freezing on sunflower silage.