• Computers and Concrete
• /
• v.15 no.3
• /
• pp.411-436
• /
• 2015

In this work, a comprehensive approach to model the structural behaviour of Reinforced Concrete (RC) beams subjected to reinforcement corrosion is proposed. The coupled environmental - mechanical damage model developed by some of the authors is enhanced for considering the main effects of corrosion on concrete, on composite interaction between reinforcement bars and concrete and on steel reinforcement. This approach is adopted for reproducing a set of experimental tests on RC beams with different corrosion degrees. After the simulation of the sound beams, the main parameters involved in the relationships characterizing the effects of corrosion are calibrated and tested, referring to one degraded beam. Then, in order to validate the proposed approach and to assess its ability to predict the structural response of deteriorated elements, several corroded beams are analyzed. The numerical results show a good agreement with the experimental ones: in particular, the proposed model properly predicts the structural response in terms of both failure mode and load-deflection curves, with increasing corrosion level.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.10 s.181
• /
• pp.2568-2580
• /
• 2000

This paper presents a quasi-static optimization technique for elastic structures under dynamic loads. An equivalent static load (ESL) set is defined as a static load set which generates the same displacement field as that from a dynamic load at a certain time. Multiple ESL sets calculated at every time step are employed to represent the various states of the structure under the dynamic load. They can cover every critical state that might happen at an arbitrary time. Continuous characteristics of dynamic load are simulated by multiple discontinuous ones of static loads. The calculated sets of ESLs are applied as a multiple loading condition in the optimization process. A design cycle is defined as a circulated process between an analysis domain and a design domain. Design cycles are repeated until a design converges. The analysis domain gives a loading condition necessary for the design domain. The design domain gives a new updated design to be verified by the analysis domain in the next design cycle. This iterative process is quite similar to that of the multidisciplinary optimization technique. Even though the global convergence cannot be guaranteed, the proposed technique makes it possible to optimize the structures under dynamic loads. It has also applicability, flexibility, and reliability.

• Bulletin of the Korean Mathematical Society
• /
• v.54 no.3
• /
• pp.875-894
• /
• 2017

Let $[n]=\{1,2,{\ldots},n\}$. A set ${\mathbf{A}}=\{A_1,A_2,{\ldots},A_l\}$ is a minimal cover of [n] if ${\cup}_{1{\leq}i{\leq}l}A_i=[n]$ and $$\bigcup_{{1{\leq}i{\leq}l,}\\{i{\neq}j_0}}A_i{\neq}[n]\text{ for all }j_0{\in}[l]$$. Let ${\mathcal{C}}(n)$ denote the collection of all minimal covers of [n], and write $C_n={\mid}{\mathcal{C}}(n){\mid}$. Let ${\mathbf{A}}{\in}{\mathcal{C}}(n)$. An element $u{\in}[n]$ is critical in ${\mathbf{A}}$ if it appears exactly once in ${\mathbf{A}}$. Two minimal covers ${\mathbf{A}},{\mathbf{B}}{\in}{\mathcal{C}}(n)$ are said to be restricted t-intersecting if they share at least t sets each containing an element which is critical in both ${\mathbf{A}}$ and ${\mathbf{B}}$. A family ${\mathcal{A}}{\subseteq}{\mathcal{C}}(n)$ is said to be restricted t-intersecting if every pair of distinct elements in ${\mathcal{A}}$ are restricted t-intersecting. In this paper, we prove that there exists a constant $n_0=n_0(t)$ depending on t, such that for all $n{\geq}n_0$, if ${\mathcal{A}}{\subseteq}{\mathcal{C}}(n)$ is restricted t-intersecting, then ${\mid}{\mathcal{A}}{\mid}{\leq}{\mathcal{C}}_{n-t}$. Moreover, the bound is attained if and only if ${\mathcal{A}}$ is isomorphic to the family ${\mathcal{D}}_0(t)$ consisting of all minimal covers which contain the singleton parts $\{1\},{\ldots},\{t\}$. A similar result also holds for restricted r-cross intersecting families of minimal covers.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2303-2315
• /
• 2013

In general, the waterway was installed for drain water from steep slope and waterway cover was set up to prevent overflow and water separation at berm of waterway. In this study, hydraulic experiment was conducted to analyze the flow characteristics and enact standard design criteria of the waterway. Hydraulic experimental apparatus which can change the slope of waterway and the length of berm were installed to analyze of flow characteristics at the waterway. The slopes of waterway were $40^{\circ}$, $50^{\circ}$, $60^{\circ}$, and $70^{\circ}$ and the range of discharge were 1.0~5.6 ${\ell}/s$. The flow in berm was distinguished two types such as hydraulic jump and splash flow. These kinds of flows depended on the rates of discharge in waterway. When inlet discharge was below 1.1~2.0 ${\ell}/s$, the separation phenomenon of water was generated at upper and lower portion in berm by the splash flow. The scattering range of water particles and length of water separation was measured depending on the slope of waterway. The start point of scattering was about 20 cm(1.3B) from the place connected upper waterway with brem and the length of water separation was till 210 cm(3.5B) from the place connected lower waterway with brem. Therefore, the waterway cover needed to install from starting of berm to 1B and from the lower part of berm to 3.5B.

• Hwankyungkyoyuk
• /
• v.24 no.2
• /
• pp.86-98
• /
• 2011

Water problems recently, not only influence environmental issues such as water quality and water management but also influence socioeconomic issues such as poverty, gender, and regional conflicts. Therefore there is increasing attention on water education as part of the environmental education. Yet water education in formal education is only treated with particular subjects like science and social studies with limited contents which fails to cover the social, economic problems related to water thoroughly. Also, though there is an active water education on the field of informal education. its contents are also very limited. Water education requires the implementation of a comprehensive and holistic approach that can holistically consider economic and social problems as well as environmental problems. Therefore in this research, 'water education for sustainable development' is set up as a direction of contents development which include interdisciplinary and holistic aspects. Contents development of water education for sustainable development is an reflection of the experts and teacher's opinions and contain of: main category dividing into three pillars of sustainable development such as environment, economy, and society, and subcategory covering environmental science's objective including knowledge, skill, attitude, and action as well as local, national, regional, and global issues.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.307-316
• /
• 2014

In view of the increased threat arising terrorism, the International Maritime Organization(IMO) adopted the International Ship and Port Facility Security Code (ISPS Code) which attached to the SOLAS Convention. The ISPS Code requires a comprehensive set of measures to enhance the security of ships and port facilities. For example, a shipowner must obtain the International Ship Security Certificate(ISSC). If the carrying vessel has not ISSC, the ship may be detained by the contracting governments. The Joint Cargo Committee(JCC) in London adopted the Cargo ISPS Endorsement, in which the assured who knowingly ships the cargoes on a non-ISPS Code compliant vessel will have no cover. However, where there is no the Cargo ISPS Endorsement in a Marine Cargo Insurance Policy and the cargo is carried by a non-ISPS Code certified vessel, the legal problem is whether or not it would constitute a breach of an implied warranty of seaworthiness and/or an implied warranty of legality. The purpose of this article is to analyze the potential legal issue on the relations between non-ISPS Code compliant vessel and two implied warranties under Marine Insurance Act(1906) in U.K.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.4
• /
• pp.646-660
• /
• 2017

This study provides basic data to develop a brassiere pattern that can cover the big breast of breast enlargement patients. In this study, we also showed areas of the brassiere cup pattern and the body surface of the breast on a breast enlargement patient. The results of the study are as follows. Correlation analysis was obtained between volume and body surface area and breast detail dimensions. After the correction process, we proposed a research bra pattern for breast augmentation patients. The cup-boundary in bra patterns of breast enlargement surgery patients is longer than the bra patterns of the general breast; therefore, the height of the inner and outer edges of the upper cups is higher. Also, it is necessary to set the new breast upper point when measuring the upper length in patients with breast augmentation surgery because the points of circumference of the breast are marked higher than chest circumference.

• Journal of Forest and Environmental Science
• /
• v.25 no.3
• /
• pp.139-146
• /
• 2009

Forest parks are regarded as one of the scientific ways to keep the forest sustainably developed, meanwhile deliver the benefits to the general public. The development of forest parks in China has experienced simply more than 20 years and both the exploitation and management institutions haven't been set up systematically, which, in reality, reflects as inadequate legislative and policy framework. Without the regulatory guidance and collaborating assistance of environment relating governmental sectors at both national and local levels, it's inevitable that the development of forest parks in the country would face constant problems and conflicts. Therefore, it might be helpful to sort out this conflicts and problems and further more to work out how to solve the barriers. The research in this report started with introducing the IUCN Protected Areas Categories, the overall current situations in China and compared the definition of forest parks in the country and that in international experience. It is to aim to find out the real usufruct rights conflicts during the exploitation and management of forest parks and the method used in this report is field visit, previous investigation, collecting secondary materials, interview, analysis and comparison. The research result in this report couldn't cover all the conflict situations during the forest parks' exploitation and management in China but will provide the analysis of this problem from the legal perspective. Practical application and concerning suggestion will be fully discussed in Part 5 in terms of legislative, social and environmental effects.

• The Research Journal of the Costume Culture
• /
• v.13 no.4 s.57
• /
• pp.658-670
• /
• 2005

Kublai Khan on a Hunting Trip were painted by Liu Guan-dao. This painting gives us very important information for understanding cosume of Yuan dynasty because of realistic description. We studied the name of costume of the king Shizu in this painting by using the way of comparison his costume with another paintings, the records and archaeological finds. This study showed that the costume of the king Shizu is judged to be Jisun, the traditional costume of Mongolian own meaning one colour. The name of each is the Yinshu warm hat, being making into the for of a kind of rodents, the Yinshu Jisun, the Red colour Jisun, being railed on the robe, and the Cloud boots cover. And we found that the decoration on the neck and sleeve tib of the Yinshu Jisun had been made by sable furs, and the decoration on the surface had been made by tails of them, going by the name of Rondes at that time. It also showed that the meaning of one colour of the Jisun is not only just appearing one colour on the one person but also being able to appear two set of one colour.

• International Journal of Fluid Machinery and Systems
• /
• v.2 no.4
• /
• pp.286-294
• /
• 2009

Hydroelectric power plants are known for their ability to cover variations of the consumption in electrical power networks. In order to follow this changing demand, hydraulic machines are subject to off-design operation. In that case, the swirling flow leaving the runner of a Francis turbine may act under given conditions as an excitation source for the whole hydraulic system. In high load operating conditions, vortex rope behaves as an internal energy source which leads to the self excitation of the system. The aim of this paper is to identify the influence of the full load excitation source location with respect to the eigenmodes shapes on the system stability. For this, a new eigenanalysis tool, based on eigenvalues and eigenvectors computation of the nonlinear set of differential equations in SIMSEN, has been developed. First the modal analysis method and linearization of the set of the nonlinear differential equations are fully described. Then, nonlinear hydro-acoustic models of hydraulic components based on electrical equivalent schemes are presented and linearized. Finally, a hydro-acoustic SIMSEN model of a simple hydraulic power plant, is used to apply the modal analysis and to show the influence of the turbine location on system stability. Through this case study, it brings out that modeling of the pipe viscoelastic damping is decisive to find out stability limits and unstable eigenfrequencies.