• 한국공작기계학회논문집
• /
• 제14권1호
• /
• pp.30-36
• /
• 2005

This study is to investigate a damage estimation of single edge notched tensile specimens as a function of acoustic emission(AE) according to the uni-directionally oriented carbon fiber/epoxy composites, CFRP In fiber reinforced composite materials, AE signals due to several types of failure mechanisms are typically observed. These are due to fiber breakage, fiber pull-out matrix cracking, delamination, and splitting or fiber bundle breaking. And these are usually discriminated on the basis of amplitude distribution, event counts, and energy related parameters. In this case, AE signals were analyzed and classified 3 regions by AE event counts, energy and amplitude for corresponding applied load. Bath-tub curve shows 3 distinct periods during the lifetime of a single-edge-notch(SEN) specimen. The characterization of AE generated from CFRP during SEN tensile test is becoming an useful tool f3r the prediction of damage failure or/and failure mode analysis.

• 한국공작기계학회논문집
• /
• 제16권3호
• /
• pp.125-132
• /
• 2007

The purpose of present paper is to investigate a fracture characteristics of the finite-width single-edge-notch(SEN) carbon fiber/epoxy reinforced plastics(CFRP) plates by using an acoustic emission(AE). Uni-directionally oriented 10 plies CFRPs specimen which had different notch length were prepared for monotonic tensile test. Matrix cracking appeared over whole testing process and fiber breaking appeared later on mainly Load distribution factor of the matrix confirmed that increased according as increases of plate width ratio. The amplitude distribution of AE signal from a specimens is an aid to the determination of the different fracture mechanism such as matrix cracking, disbonding, interfacial delamination, fiber pull-out, fiber breaking, and etc. In the result of AE amplitude distribution analysis, matrix cracking, fiber disbonding or interfacial delamination, and fiber pull-out or fiber breaking signal correspond to <65dB, <75dB, and <90dB respectively, Also, changes of the slope of cumulative AE energy represented crazing phenomena or degradation of materials.

• Journal of the Korean Wood Science and Technology
• /
• 제17권4호
• /
• pp.83-88
• /
• 1989

목재의 섬유방향에 경사진 균열의 모-드I과 모-드II의 혼합모-드파괴시의 파괴거동을 조사하기 위하여 라왕(Shorea Spp.)의 LA시스템에 있어서 서로 다른 경사각도를 가진 SEN시험편(Single edge notch specimen)에 대하여 휨 시험을 행하였다. 얻이진 결과는 혼합모-드파괴시, 모-드I응력확대계수$K_I$과 모-드II응력확대계수$K_II$간에 일정한 상호작용이 존재한다는 것을 나타내었다. 또한, 모-드I과 모-드II의 임계응력확대계수(Critical stress intensity factor) $K_{IC}$와 $K_{IIC}$ 이용하여 혼합모-드파괴시의 $K_I$과 $K_II$간의 상호관계를 규정할 수 있었으며, 이미 보고된 여러 실험식과 본 실험결과를 비교하여 가장 적합한 관계로서 아래와 같은 관계를 얻을 수 있었다.