• Journal of the Korean Society for Heat Treatment
• /
• v.23 no.6
• /
• pp.344-349
• /
• 2010

Silicon carbide nanowires were grown by heat treatment of the films at $1200^{\circ}C$ after amorphous SiC thin films were deposited on graphite substrate by radio frequency magnetron sputtering at $600^{\circ}C$. It was confirmed that SiC nanowires with the diameter of 20-60 nm and length of about 50nm were grown from Field Emission Scanning Election Microscope (FE-SEM) and Transmission Election Microscope (TEM) observation. The diameter of nanowires was increased as heat treatment time is increased. The nanowires were identified to ${\beta}$-SiC single crystalline from X-Ray Diffraction(XRD) analysis. It was observed from this study that deposition temperature of samples was critical to the crystallization of nanowires. On the other hand, the effect of deposition time was insignificant.

• Journal of the Korean Applied Science and Technology
• /
• v.21 no.2
• /
• pp.164-173
• /
• 2004

The capacity and long life of gel electrolyte batteries is connected with gas recombination producting $PbO_2$ and Pb electrode. We prepared with sulfuric acid gel electrolyte to know gel characteristics per density to assemble valve regulated lead-acid (VRLA) batteries. We studied on actions of sulphuric acid gel electrolyte by measuring electrolyte dispersion using Brewster-angle microscope (BAM), charge-discharge cycle, and electrode structure using scanning election microscope (SEM). Sulphuric acid density 1.210 showed excellent gel dispersion in sol condition, electrode condition after fifty cycles in this study.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.4
• /
• pp.296-308
• /
• 2003

The capacity and long life of gel electrolyte batteries is connected with gas recombination producting $PbO_2$ and Pb electrode. We were prepared with phosphoric acid gel electrolyte to know gel characteristics per density to assemble VRLA batteries. We studied by measuring electrolyte dispersion using Brewster-angle microscope(BAM), charge-discharge cycle and electrode structure using scanning election microscope(SEM) per electrolyte density. As a results, phosphoric acid density 1.210 was excellent gel dispersion in sol condition, electrode condition after fifty cycles in this study.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.3
• /
• pp.157-166
• /
• 2020

PURPOSE. The aim of this study was to evaluate the clinical performance and reliability of plasma sprayed nanostructured zirconia (NSZ) coating. MATERIALS AND METHODS. This study consisted of three areas of analysis: (1) Mechanical property: surface roughness of NSZ coating and bond strength between NSZ coating and titanium specimens were measured, and the microstructure of bonding interface was also observed by scanning election microscope (SEM). (2) Biocompatibility: hemolysis tests, cell proliferation tests, and rat subcutaneous implant test were conducted to evaluate the biocompatibility of NSZ coating. (3) Mechanical compatibility: fracture and artificial aging tests were performed to measure the mechanical compatibility of NSZ-coated titanium abutments. RESULTS. In the mechanical study, 400 ㎛ thick NSZ coatings had the highest bond strength (71.22 ± 1.02 MPa), and a compact transition layer could be observed. In addition, NSZ coating showed excellent biocompatibility in both hemolysis tests and cell proliferation tests. In subcutaneous implant test, NSZ-coated plates showed similar inflammation elimination and fibrous tissue formation processes with that of titanium specimens. Regarding fatigue tests, all NSZ-coated abutments survived in the five-year fatigue test and showed sufficient fracture strength (407.65-663.7 N) for incisor teeth. CONCLUSION. In this study, the plasmasprayed NSZ-coated titanium abutments presented sufficient fracture strength and biocompatibility, and it was demonstrated that plasma spray was a reliable method to prepare high-quality zirconia coating.

• Food Science and Preservation
• /
• v.13 no.3
• /
• pp.382-388
• /
• 2006

Physicochemical properties of chufa starch were investigated The result are summarized as follow: Moisture content crude protein and crude fat were 10.10%, 0.31% and 0.41,% respectively. Amylose content of chufa starch was 41.6% and blue value was 0.49. Lightness and whiteness of chufa starch was 96.36 and 92.23 of Hunter's color value. In iodine reaction, maximum absorbance wavelength (${\lambda}max$) was 628 nm. Water binding capacity was 83% and swelling power and solubility of chufa starch were increased slowly to $60^{\circ}C$, but increased rapidly after $60^{\circ}C$. Scanning election microscope(SEM) showed that granule type of chufa starch was round or elliptic type, and average granule size was $10{\mu}m$. The results by differential scanning calorimetry(DSC) revealed that gelatinization patterns were similar to those of potato or rice starch. In rapid viscoanalyzer(RVA) examination, pasting temperature was $79.95^{\circ}C$ and peak viscosity of chufa starch was 385.08.

• Journal of the Society of Disaster Information
• /
• v.15 no.4
• /
• pp.479-492
• /
• 2019

Purpose: The purpose of this study is to accurately analyze the damage of bridges in order to determine whether fire bridges can be used continuously or to provide information on maintenance augmentation data. Method: XRD, SEM and EDS analyzes of concrete were carried out to estimate the fire temperature transferred to the structure, and analyzed by depth and area from PSCI beam and bottom plate concrete surface. Results: Test results G_12,11 for the fire zone concrete were confirmed to be affected by heat up to depth of 60mm and the temperature of the hydrothermal heat was above 1000℃. Also, the girder G_10,9,8 was relatively weakly damaged compared to G_12,11, and the degree of damage was confirmed to be affected by heat up to a depth of 40 mm. Conclusion: Based on the analyzed data, it is considered that if the repair / reinforcement and periodic inspection are carried out, the bridge can secure sufficient safety even considering the damage caused by the fire.

• Journal of Sericultural and Entomological Science
• /
• v.43 no.2
• /
• pp.77-82
• /
• 2001

This study was investigated to know the effects of diflubenzuron(DFB) on the larval silkgland development of the silk-worm, Bombyx mori (L.). It has been known as a prohibitor of chitin synthesis mostly on the species of the Order Lepidoptera. In this work, the effects of the DFB concentrations (2.5$\times$10$\^$-1/,2.5$\times$10$\^$-2/, and 2.5$\times$10$\^$-3/$\mu\textrm{g}$/$\mu$l on the various larval stages, were investigated in terms on the silkgland. The macro- and microstructure of cell membrane of silkgland, and the differences of silkgland weight and water contents treated by DFB are also surveyed. As the tesults, the silkgland weight depended sensitively on not the DFB concentration but the DFB treatment period. The longer DFB treatment period, the lighter dried silkgland weight and the heavier water content of the silkgland. White opaque(WO) emerged in the middle silkgland of DFB treated larva. From the scanning election microscope observation, the cell membrane of silkgland of DFB treated larva was distinctly more compact compared to that of control. The WO was evidently resulted from the obstacles of normal transformation of silk protein through the cell membrane of middle silkgland.