• 제목/요약/키워드: SEED CONDITION

검색결과 679건 처리시간 0.023초

Effect of Processing Method on Change of Water Soluble Dietary Fiber of Fagopyrum tataricum

  • Kim, Dong-Eun;Lee, Beom-Goo;Park, Cheol-Ho;Kang, Wie-Soo
    • Agricultural and Biosystems Engineering
    • /
    • 제6권2호
    • /
    • pp.70-76
    • /
    • 2005
  • Seed, stem and sprout of F. tataricum were separately milled using the ultra fine mill under the same condition to investigate the effect of roasting or extruding on the particle size, microstructure and water solubility of dietary fiber. The mean particle size of MR (roasting) is increased in stem and sprout, and that of ME (extruding) is increased in seed, compared to that of control. The microscopic views of seed show that control has the spherical shape but ME the larger and irregular shape, and those of stem and sprout show that control has the needle like shape but ME more rounded shape. Water solubility index of ME is much higher than that of control or MR in seed, stem and sprout. It shows that seed, stem and sprout are damaged more in extruding than in roasting, and the starch and cell wall structure must be destroyed to change the water insoluble dietary fiber into the water soluble dietary fiber.

  • PDF

Assessing the Performance of Pongamia pinnata (l.) Pierre under Ex-situ Condition in Karnataka

  • Divakara, Baragur Neelappa;Nikhitha, Chitradurga Umesh
    • Journal of Forest and Environmental Science
    • /
    • 제38권1호
    • /
    • pp.12-20
    • /
    • 2022
  • Pongamia (Pongamia pinnata L.) as a source of non-edible oil, is potential tree species for biodiesel production. For several reasons, both technical and economical, the potential of P. pinnata is far from being realized. The exploitation of genetic diversity for crop improvement has been the major driving force for the exploration and ex situ/in situ conservation of plant genetic resources. However, P. pinnata improvement for high oil and seed production is not achieved because of unsystematic way of tree improvement. Performance of P. pinnata planted by Karnataka Forest Department was assessed based on yield potential by collecting 157 clones out of 264 clones established by Karnataka Forest Department research wing under different research circles/ranges. It was evident that the all the seed and pod traits were significantly different. Further, selection of superior germplasm based on oil and pod/seed parameters was achieved by application of Mahalanobis statistics and Tocher's technique. On the basis of D2 values for all possible 253 pairs of populations the 157 genotypes were grouped into 28 clusters. The clustering pattern showed that geographical diversity is not necessarily related to genetic diversity. Cluster means indicated a wide range of variation for all the pod and seed traits. The best cluster having total oil content of more than 34.9% with 100 seed weight of above 125 g viz. Cluster I, II, III, IX, XV, XIX, XXI, XXIII, XXVI and XXVII were selected for clonal propagation.

졸-겔법에 의한 실리카 유리의 제조에 있어서 Seed첨가의 역할 (The Roles of Seeds on Preparation the Silica Glass by Sol-Gel Process)

  • 이경희;이병하;오부근;안광훈;김종옥
    • 한국세라믹학회지
    • /
    • 제26권5호
    • /
    • pp.677-681
    • /
    • 1989
  • On the preparation of silica glass by sol-gel process, we used fine powder of silica gel to prevent cracking. In this case, the best condition of silica glass preparation is the contents of 10~40wt% seed and the gelation time of solution in contract. The dried gels conversed to silica glass by heat treatment up to 125$0^{\circ}C$.

  • PDF

식물공장 시스템을 이용한 약초의 채소화에 관한 기초연구 1. 채소화가능 약초종자의 발아에 미치는 온도 및 광의 영향 (A Study on Utilization of Medicinal Herb as Vegetable by Hydroponics I. The effect of light and temperature on the seed germination of medicinal herb.)

  • 최성규
    • 한국자원식물학회지
    • /
    • 제7권2호
    • /
    • pp.137-141
    • /
    • 1994
  • In order to establish utilijzation of medicinal herb as vegetable by Hydroponics, the present studies were conducted to investigate the effect of temperature and light on the seed germination ofmedicinal herb. The results obtained are summaried as follows. The lower and upper temperaturelimit for herb germination was 10'c and 30'c within which the optimum was 20'C. Germinationof medicinal herb was similar in light and dark condition.

  • PDF

Soybean Ecological Response and Seed Quality According to Altitude and Seeding Dates

  • Shin, Sang-Ouk;Shin, Seong-Hyu;Ha, Tae-Jeong;Lim, Sea-Gyu;Choi, Kyung-Jin;Baek, In-Youl;Lee, Sang-Chul;Park, Keum-Yong
    • 한국작물학회지
    • /
    • 제54권2호
    • /
    • pp.143-158
    • /
    • 2009
  • This experiment was carried out to examine ecological response and soybean quality as affected by environmental cultivation for producing high seed quality in domestic soybean variety. The results are as follows: Under equal cumulative temperature condition, soybean plants grown in Muju showed longer days to flowering, which was an effect of the long day-length on high latitudes, and longer duration of reproductive stage as a result of low temperature within that period. Considering apparent seed quality, 100 seed weight of soybeans grown in Muju was heavier than Miryang. Ratio of seed crack and disease-damaged seeds was lower in Muju, and these parameters decreases as planting was delayed. The protein contents did not show significant difference in terms of altitude and planting date, however, crude oil contents were higher in Miryang. An opposite trend was observed in C18:1 and C18:3. In the fatty acid composition, the proportion of C18:1 decreased as seeding date was delayed, and was higher in Miryang. Opposite observations were obtained from C18:3. The anthocyanin contents were highest on June 10 planting and higher in Muju than in Miryang. Isoflavone content was higher as seeding date was delayed and is similar accross seeding dates in Muju. As a summary, for high seed quality production the optimum planting date was June 10, and Muju was more suitable region than Miryang.

종결정 코팅용액 pH 값이 α-알루미나 지지체 표면에 성장하는 Silicalite-1 제올라이트 분리층의 미세구조에 미치는 영향 (Effect of the pH Value of Seed Coating Solution on Microstructure of Silicalite-1 Zeolite Separation Layer Grown on α-Alumina Support)

  • ;김민지;이두형;;한문희;조철희
    • 멤브레인
    • /
    • 제25권5호
    • /
    • pp.422-430
    • /
    • 2015
  • 본 연구에서는 silicalite-1 제올라이트 분리막 합성 시에 종결정 코팅용액 pH 변화가 제올라이트 분리층 미세구조에 미치는 영항을 고찰하였다. 75 nm 크기로 합성된 종결정은 에탄올에 분산된 후 침지코팅법으로 지지체 표면에 코팅되었으며 분산용액의 pH는 2.2, 7.0, 9.3으로 조절되었다. pH가 7인 경우, 균일하고 두께가 $3{\sim}4{\mu}m$인 silicalite-1 제올라이트 분리층이 형성되었고 분리층 결정입 크기는 100 nm로 미세하였다. 반면, pH가 2.2와 9.3인 경우, 분리층 두께가 얇고 불완전하였으며 분리층 결정입 크기도 약 $1{\mu}m$로 조대하였다. pH 7에서 완전한 제올라이트 분리층이 형성된 것은 침지코팅 중에 지지체와 종결정이 서로 다른 부호의 전하를 가져 정전기적 인력이 작용하여 균일하고 조밀하며 두껍고 다층의 종결정 코팅층이 형성되었기 때문이었다. 반면에 pH가 2.2와 9.3인 경우, 침지코팅 중에 지지체와 종결정이 서로 같은 부호의 전하를 가져 정전기적 반발력이 작용하기 때문에 불완전한 덮힘에 의하여 불완전한 분리층이 형성된다고 판단되었다. 결론적으로, 종결정 코팅용액의 pH가 silicalite-1 제올라이트 분리층의 두께, 결정립 크기 등 미세구조를 결정하는 중요한 인자임을 확인할 수 있었다.

Nucleation and Growth of Diamond in High Pressure

  • Choi, Jun-Youp;Park, Jong-Ku;Kang, Suk-Joong L.;Kwang, Yong-Eun
    • The Korean Journal of Ceramics
    • /
    • 제2권4호
    • /
    • pp.221-225
    • /
    • 1996
  • In diamond synthesis by metal film growth method under high pressure and high temperature, the nucleation and growth of diamond was observed dependent on the carbon source variation from graphite powder to the heat treated powders of lamp black carbon. At the low driving force condition near equilibrium pressure and temperature line, nucleation of diamond did not occur but growth of seed diamond appeared in the synthesis from lamp black carbon while both nucleation and growth of diamond took place in the synthesis from graphite. Growth morphology change of diamond occurred from cubo-octahedron to octahedron in the synthesis from graphite but very irregular growth of seed diamond occurred in the synthesis from lamp block carbon. Lamp black carbon transformed to recrystallized graphite first and very nucleation of diamond was observed on the recrystallized graphite surface. Growth morphology of diamond on the recrystallized graphite was clear cubo-octahedron even at higher pressure departure condition from equilibrium pressure and temperature line.

  • PDF

한약자원식물인 Dendrobium monile 종자의 무균배양에 관한 연구 I. 기본배지 및 생장조절 생질이 종자의 발아와 유묘 생육에 미치는 영향 ( Studies on Aseptic Culture of Seed in Dendrobium Monile I. Effect of Basal Media and Growth Regulators on Germination of Se (Studies on Aseptic Culture of Seed in Dendrobium Monile I. Effects of Basal Media and Growth Regulators on Germination of Seeds and Growth of Plantlet)

  • 최성규
    • 한국자원식물학회지
    • /
    • 제1권1호
    • /
    • pp.88-92
    • /
    • 1988
  • The study was conducted to determine the optimal basal media and the concentration of plant growth regulator for germination of seeds and growth of plantlet from Dendrobium monile. The results obtained were summarized as follows. Germination was similar in light and dark condition, but the growth of plantlet after germination was better under dark than under light condition in several media. Germination was best in Hyponex and Kyoto solution medium among the 9 media tested. The number of roots/shoot was most in the Hyponex medium containing 0,1ppm NAA and 1.Oppm BA.

  • PDF

Effects of Seed Size and Several Factors on Ultra-drying and Germination of Ultra-dried Seeds in Soybean

  • Lee, Yeong-Ho;Chang, Ching-huan
    • 한국작물학회지
    • /
    • 제45권5호
    • /
    • pp.305-309
    • /
    • 2000
  • Ultra-drying [<5.0% seed moisture content (SMC)] storage technique is a cost-effective storage method for oily seeds. To decide proper ultra-drying condition for soybean seeds, drying rate was compared three silica gel to seed ratios, two seed sizes with varietal difference, two kinds of container, and three seed amounts per container under :t 23$\pm$1$^{\circ}C$. When the relative humidity (RH) was reduced at the rate of less than 0.1 % a day, silica gel was replaced with dry one by 47 days. Higher silica gel to seed ratios (3:1 and 2:1) dried faster than lower ratio (1:1) until 28 days, but not after 43 days of drying. Also, large seeded variety was dried faster than small seeded variety. Kinds of container and seed amounts per container didn't show differences in drying of soybean seeds. After completion of ultra-drying, percentage germination by standard germination test (SGT) was not different among silica gel to seed ratios, kinds of container, and seed amounts per container, except among seed sizes (varieties). Before SGT, soybean seeds were premoistened using saturated ${CaCl}_2$ for 48 hours and ${NH}_4$Cl for 24 hours in desiccators. To compare germinability between ordinary-dried seeds and ultra-dried seeds, the seeds of seven soybean varieties, which were varying in size from 8.1 to 34.9 g per 100 seeds, were dried using same amount of silica gel under 23$\pm$1$^{\circ}C$. After completion of 76 days of drying, SMCs were reduced to 3.13-3.45% from 7.86-8.82%. SMC after completion of drying was not correlated with 100-seed weight (r=0.556). Before germination tests, soybean seeds were premoistened using saturated salt solutions. Percentage germination was higher with ultra-dried seeds than ordinary-dried seeds in SGT and higher with ordinary-dried seeds than ultra-dried seeds in AAT at the beginning of storage and after 6 months storage, but general trend of percentage germination was not observed among varieties classified by 100-seed weight. From these results, we concluded that further studies are needed to improve ultra-drying storage method for soybean seeds.

  • PDF

128비트 SEED 암호 알고리즘의 고속처리를 위한 하드웨어 구현 (High Performance Hardware Implementation of the 128-bit SEED Cryptography Algorithm)

  • 전신우;정용진
    • 정보보호학회논문지
    • /
    • 제11권1호
    • /
    • pp.13-23
    • /
    • 2001
  • 본 논문에서는 우리 나라 128 비트 블록 암호 알고리즘 표준인 SEED를 하드웨어로 구현하였다. 먼저 하드웨어 구 현 측면에서 SEED를 같은 비밀키 블록 암호 알고리즘으로 AES 최종 후보 알고리즘인 MARS, RC6, RIJNDAEL, SERPENT, TWOFISH와 비교 분석하였다. 동일한 조건하에서 분석한 결과, SEED는 MARS, RC6, TWOFISH보다는 암호 화 속도가 빨랐지만, 가장 빠른 RIJNDAEL보다는 약 5배정도 느렸다. 이에 속도 측면에서 우수한 성능을 가질 수 있는 고속 SEED 구조를 제안한다. SEED는 동일한 연산을 16번 반복 수행하므로 1라운드를 Jl 함수 블록, J2 함수 블록, key mixing 블록을 포함한 J3 함수 블록의 3단계로 나누고, 이를 파이프라인 시켜 더 빠른 처리 속도를 가지도록 하였다. G 함수는 구현의 효율성을 위해 4개의 확장된 4바이트 SS5-box 들의 xor로 처리하였다. 이를 Verilog HDL을 사용하여 ALTERA FPGA로 검증하였으며, 0.5um 삼성 스탠다드 셀 라이 브러리를 사용할 경우 파이프라인이 가능한 ECB 모드의 암호화와 ECB, CBC, CFB 모드의 복호화 시에는 384비트의 평문을 암복호화하는데 총 50클럭이 소요되어 97.1MHz의 클럭에서 745.6Mbps의 성능을 나타내었다. 파이프라인이 불 가능한 CBC, OFB, CFB 모드의 암호화와 OFB 모드의 복호화 시에는 동일 환경에서 258.9Mbps의 성능을 보였다.