• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.4
• /
• pp.269-273
• /
• 2006

Multiple linear regression analysis was conducted to interpretate the relationship between sesame grain yield and its components under early sowing cropping condition. The t test showed that stem length, number of capsules per plant, 1000 seeds weight and seed weight per plant gave significant contribution to sesame grain yield, therefore those variables were assumed to mostly influenced components to grain yield of sesame. In the stepwise regression analysis, the predicted equation for sesame grain yield per square meter (Y) was Y = -7.900 + 0.150X1 + 0.461X5 + 15.553X6 + 8.543X7. Meanwhile, F value showed that stem length, number of capsules per plant and seed weight per plant gave significant contribution to sesame grain yield, while 1000 seeds weight did not significantly show. Based on the results, it is reasonable to assume that high yield. potential of sesame under early sowing cropping condition would be obtained by selecting breeding lines with long stem length, number of capsules per plant, and seed weight per plant, which was different result at the late sowing cropping condition in which days to flowering and maturity were assumed to be more affected factors to the sesame grain yield.

• Journal of Advanced Marine Engineering and Technology
• /
• v.16 no.5
• /
• pp.97-110
• /
• 1992

Rape-seed oil has high viscosity and high rubber content like other vegetable oils. When crude rape-seed oil obtained by a general oil extraction process is used in a diesel engine, automization condition during injection is not good and a large amount of combustion product is doposited in a combustion chamber. The improvement of a diesel engine is required to use rape-seed oil as a diesel engine fuel. In this study, the physical and chemical properties and combustion characteristics of rape-seed oil were investigated. The auxiliary aid was developed to improve automization condition and the effect of the auxiliary injection aid on the performance of a diesel engine was determined. The results are as follows. 1) Oil content of rape-seed is 45%. The exraction rate is 33%. The resuls show higher values compared to those of other vegetable oils. 2) The viscosity of rape-seed oil is 50.8 cSt and nearly 14 times of diesel oil viscosity. 3) The heating value and flash point of rape-seed oil are 9720kcal/Kg and 318$^{\circ}C$, respectively. 4) In case rape-seed oil is used as fuel, brake horse power, specific fuel consumption and brake thermal efficiency are compared to those of diesel oil. The results of rape-seed oil show 3.6%, 12.7% and 3.1% higher values. 5) Particle size of injection fuel with the auxiliary injection aid on the performance of a diesel engine was determined. The results are as follows. 1) Oil content of rape-seed is 45%. The extraction rate is 33%. The results show higher values compared to those of other vegetable oils. 2) The viscosity of rape-seed oil is 50.8 cSt and nearly 14 times of diesel oil viscosity. 3) The heating value and flash point of rape-seed oil are 9720kcal/Kg and 318.deg.C, respectively. 4) In case rape-seed oil is used as fuel, brake horse power, specific fuel consumption and brake thermal efficiency are compared to theose of diesel oil. The results of rape-seed oil show 3.6%, 12.7% and 3.1% higher values. 5) Particle size of injection fuel with the auxiliary injection aids is 100.mu.m smaller than that od injection fuel without the aid. 6) Brake horse power and brake thermal efficiency with the auxiliary injection aid increase 5.07% and 6.07%, respectively. However, specific fuel consumption decreases 3.85% with the auxiliary injection aid.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.7
• /
• pp.599-607
• /
• 2006

The experiments were carried out to develop simulation model for estimating the yield of soybean in upland and paddy field condition. Field experiments were done at National Institute of Crop Science in 2005. The evaluated soybean cultivars were Taekwangkong, Daewonkong, and Hwangkeumkong. Soybean seeds were planted by hill seeding with 3-4 seeds and row and hill spacing were $60{\times}10cm$ in upland and $60{\times}15cm$ in paddy field. Seeds were sown on row (without making ridge) and on the top of ridge in upland and paddy field, respectively. Field parameters were measured yield components ($plants/m^{2}$, pod no./plant, and 100-seed weight, seed yield and growth characteristics (stem length, leaf area at each stage, and dry weight of shoot) and after measuring they were compared the relationships with seed yield and yield components and seed yield and growth characteristics. Seed yield of soybean was affected by cultivars and planting density. Seed yield was higher in upland than paddy field due to the higher planting density in upland field. The upland soybeans generally had lower 100-seed weight than that of paddy field. Seed yield of soybean in a paddy field was greatest in Taekwangkong and followed by Daewonkong and Hwangkeumkong. The harvest index of taekwangkong and Hwanggumkong was higher in upland than paddy field, however, it was higher in paddy field than upland in Daewonkong. Seed yield was greatest in Daewonkong in both experimental fields. The greatest stem length was observed in taekwangkong and Hwanggumkong (R6) in late growth stage in paddy field. Dry weight of shoot and pod, pod number, stem length, and stem diameter were higher grown in paddy field than grown in upland. Crop growth rate (CGR) of cultivars was higher in paddy field after 8 WAS(weeks after sowing) and it was greatest at 13 WAS in Daewonkong among the cultivars. In upland field, CGR was greatest in Taekwangkong and then followed by Daewonkong and Hwanggumkong during 12 and 15 WAS. There was no significant relationships between 100-seed weight and seed yield in both experimental fields. A significant positive relationship was observed between seed number and seed yield. The correlation coefficients between leaf area and shoot dry weight were about 0.8 during the whole growth stage except 5 WAS and 4-5 WAS in paddy field and upland, respectively. This experiment was done just one year and drained paddy field condition was not satisfied drained condition successfully at 7th leaf age of soybean by the heavy rain, so we suggest that the excessive soil water reduced seed yield in paddy field and the weather condition should be considered for utilizing of these results.

• The Plant Pathology Journal
• /
• v.22 no.1
• /
• pp.90-93
• /
• 2006

Innate defence mechanism in plants can be triggered and enhanced by certain agents, referred as inducers against broad range of pathogens. In the present study, Dravya (a sea weed extract) was highly compatible with commonly available synthetic fungicides, Bavistin and Dithane M-45. Incidence of Alternaria padwickii and Bipolaris oryzae was also reduced to a greater extent in the paddy seed samples in Dravya treatment. Dravya also enhanced the seed germination and seedling vigour. Seedlings of treated samples also showed enhanced activity of peroxidase upon challenge inoculation with Alternaria padwickii. The enzyme activity was two fold high after the inoculation of pathogen. The suppression in disease incidence in growing plants indicated the promising effect of Dravya and Dithane M-45 under green-house condition.

• Weed & Turfgrass Science
• /
• v.7 no.3
• /
• pp.171-179
• /
• 2018

We investigated changes of weedy rice emergence and seed condition under different flooding depth condition using 100 accessions of weedy rice germplasm collected in South Korea. In 1 cm of soil buried depth condition, 54 and 57% of emergence was reduced under 5 and 10 cm of flooding depth conditions respectively compared to non-flooding condition. In 5 cm of soil buried depth condition, 66 and 84% of emergence was reduced under 5 and 10 cm of flooding depth conditions respectively compared to non-flooding condition. The 94% of weedy rice germplasm showed less than 10% of emergence rate at 10 cm of flooding depth condition. In flooding condition, seed number, which germinated but did not emerged, was increased. As a result of analyzing the correlation between effective accumulated temperature and seed condition, dead seed rate increased and germination rate decreased depending on effective accumulated temperature. However, emergence rate did not show significant correlation with growth temperature condition under flooding condition such as 5 or 10 cm of water depth, it decreased according to flooding period. In order to reduce the emergence rate of weedy rice, longer than 21 days of flooding might be needed.

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.2
• /
• pp.163-171
• /
• 1996

The influences of temperature, harvest time, sowing time, seeding media, moisture content of media and light on the seed germination of Lycoris are as follows, Both L. koreana and L. aurea had over 90% seed setting, and seed maturity came in September or early October. It took six months to have over 60% seed germination. The optimum germination temperature was $25^{\circ}C$, and the alternating treatment was effective at $20{\rightleftarrows}25^{\circ}C$. The optimum harvest-time was around Sep. 20, and the optimum seed-time was immediately after havest. The optimum seeding media was sand loam, and the optimum moisture content was PF 1. 9/400ml seeding media. The dark condition was more effective for the seed germination than the light condition.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.5
• /
• pp.303-306
• /
• 2006

Seed of Codonopsis lanceolata exhibits low germination due to impermeable seed coat. Prolonged seed dormancy can be overcome by the application of gibberellins, as it promotes growth of the embryo and weakens the structures surrounding of embryo. The effects of photoperiod, sugar and gibberellin concentration were investigated at constant temperature for 12 days and 22 days in vitro and invivo conditions respectively. The rate of germination of seeds of Codonopsis lanceolata in wet filter paper in both complete dark and light treatments was significantly lower than that of seed treated with $GA_3$. It clearly indicates that there is significant coat imposed dormancy in the seed of Codonopsis lanceolata. The rate of germination in vivo condition was lower than that of the in vitro condition supplemented with $GA_3$ Thus, the physical dormancy due to impermeable seed coat and low level of endogenous gibberellins in the seed was the cause of poor germination rate in Codonopsis lanceolata.

• Journal of Korean Society of Forest Science
• /
• v.99 no.4
• /
• pp.618-624
• /
• 2010

This study was conducted to establish the in vitro seed germination of Loranthus tanakae. A factorial experiment evaluated the effects of seed storage duration (0, 8, 16 weeks), media (MS, SH, White, WPM), presence of viscin, GA3, gelling agent and concentrations. Seed germinated after one week culture in in vitro condition and produced radicles. In vitro seed germination was optimal when the seeds removed viscin placed on SH medium (69%) and the addition of 0.35% gelrite (75%) in the same medium. As seed storage duration was expanded to 8 or 16 weeks, in vitro seed germination rate was reduced rapidly. Holdfasts were also produced at the side of radicles. The important factors to produce holdfast and haustorium was kind of media as an optimal condition in White medium without any supplements to be shown 98% and 8% respectively. Process of in vitro germination of Loranthus tanakae was followed to radicle elongation, holdfast development and then haustorium formation sequencially.

• The Journal of Korean Medicine
• /
• v.22 no.4
• /
• pp.101-106
• /
• 2001

Objectives : Zizyphus seed has long been used in hypnotics and sedatives in oriental medicine, and it is reported that the Zizyphus seed elicited a variety of pharmacological actions besides CNS depression. We did a clinical study on the effectiveness of Zizyphus seed (Ansim-san) for insomnia in stroke patients. Methods : To 41 stroke patients suffering from insomnia, we administered the extract of Zizyphus seed (Ansim-san). Outcome measures were subjective in nature and included a morning questionnaire, visual analog scales, and observation forms by study personnel. We also, to find the applicable symptom-complex of Zizyphus seed (Ansim-san), examined accompanying symptoms. Results : 1. Zizyphus seed extract use meant that sleep latency was shorter, total sleep time was longer, number of wakenings was lower, wake time during sleep was shorter, sleep quality was improved, condition upon awakening was improved, ability to concentrate was improved, and the patients fell asleep more easily (P<0.001). There were no differences in morning sleepiness. 2. Among accompanying symptoms, an oppressed feeling in the chest was significant (P=0.035) in the patients who improved sleep quality. Conclusions : The results of this clinical study suggest that in stroke patients, Zizyphus seed (Ansim-san) can be effective for insomnia, and significantly effective in patients who have an oppressed feeling in the chest.

• Korean Journal of Materials Research
• /
• v.11 no.9
• /
• pp.802-809
• /
• 2001

Electroplating is an attractive alternative deposition method for copper with the need for a conformal and conductive seed layer In addition, the Cu seed layer should be highly pure so as not to compromise the effective resistivity of the filled copper interconnect structure. This seed layer requires low electrical resistivity, low levels of impurities, smooth interface, good adhesion to the barrier metal and low thickness concurrent with coherence for ensuring void-free fill. The electrical conductivity of the surface plays an important role in formation of initial Cu nuclei, Cu nucleation is much easier on the substrate with higher electrical conductivities. It is also known that the nucleation processes of Cu are very sensitive to surface condition. In this study, copper seed layers deposited by magnetron sputtering onto a tantalum nitride barrier layer were used for electroplating copper in the forward pulsed mode. Prior to electroplating a copper film, the Cu seed layer was cleaned by plasma H$_2$ and $N_2$. In the plasma treatment exposure tome was varied from 1 to 20 min and plasma power from 20 to 140W. Effects of plasma pretreatment to Cu seed/Tantalum nitride (TaN)/borophosphosilicate glass (BPSG) samples on electroplating of copper (Cu) films were investigated.