• Smart Structures and Systems
• /
• 제24권3호
• /
• pp.391-401
• /
• 2019

Control of vibrations against extraordinary excitations such as wind and earthquake is very important to the protection of life and financial concerns. One of the methods of structural control is to use Tuned Liquid Damper (TLD), however due to the nature of TLD only one sloshing frequency can be created when the water is sloshing. Among various ideas proposed to compensate this problem, by changing the angle of some rotatable baffles embedded inside a TLD, a frequency range is created such that these baffles are tuned manually at different frequencies. In this study, the effect of cross sectional shape of container with rotating baffles on seismic behavior of TLD is experimentally studied. For this purpose, rectangular and cylindrical containers are designed and used to suppress the vibrations of a Single Degree-Of-Freedom (SDOF) structure under harmonic and earthquake excitations considering three baffle angles. The results show that the rectangular-shaped damper reduces the structural response in all load cases more than the damper with a cylindrical shape, such that maximum differences of two dampers to reduce the structural displacement and structural acceleration are 5.5% and 3% respectively, when compared to the cases where no baffles are employed.

• Smart Structures and Systems
• /
• 제31권6호
• /
• pp.601-619
• /
• 2023

In this study, the accuracy of a real-time hybrid test (RTHT) employed for a performance test of a tuned mass damper (TMD) on an offshore wind turbine (OWT) with a complicated jacket-type supporting structure is quantified and evaluated by comparing the RTHT results with the experimental data obtained from a shaking table test (STT), in which a 1/25-scale model for a typical 5-MW OWT controlled by a TMD was tested. In the RTHT, the jacket-type OWT structure was modelled using both multiple-DOF (MDOF) and single-DOF (SDOF) numerical models. When compared with the STT test data, the test results of the RTHT show that while the SDOF model, which requires less control computational time, is able to well predict the peak responses of the nacelle and TMD only, the MDOF model is able to effectively predict both the peak and over-all time-history responses at multiple critical locations of an OWT structure. This also indicates that, depending on the type of structural responses considered, an RTHT with either an SDOF or a MDOF model may be a promising alternative to the STT to assess the effectiveness of a TMD for seismic mitigation in an OWT context.

• Structural Engineering and Mechanics
• /
• 제29권2호
• /
• pp.187-201
• /
• 2008

Earthquake induced hysteretic energy demand for a structure can be used as a limiting value of a certain performance level in seismic design of structures. In cases where it is larger than the hysteretic energy dissipation capacity of the structure, failure will occur. To be able to select the limiting value of hysteretic energy for a particular earthquake hazard level, it is required to define the variation of hysteretic energy in terms of probabilistic terms. This study focuses on the probabilistic evaluation of earthquake induced worst failure probability and approximate confidence intervals for inelastic single-degree-of-freedom (SDOF) systems with a typical steel moment connection based on hysteretic energy. For this purpose, hysteretic energy demand is predicted for a set of SDOF systems subject to an ensemble of moderate and severe EQGMs, while the hysteretic energy dissipation capacity is evaluated through the previously published cyclic test data on full-scale steel beam-to-column connections. The failure probability corresponding to the worst possible case is determined based on the hysteretic energy demand and dissipation capacity. The results show that as the capacity to demand ratio increases, the failure probability decreases dramatically. If this ratio is too small, then the failure is inevitable.

• 한국해안해양공학회지
• /
• 제7권1호
• /
• pp.116-125
• /
• 1995

파하중과 해류하중을 받는 단일 자유도계를 동적 해석하여 비선형 거동을 나타냄을 보이고 고차의 비선형 전이함수를 포함한 모델을 적용하여 그 비선형 차수를 알아낸다. 먼저 구조물에 단일 정현파, 두 파의 합성파 그리고 불규칙파 하중을 차례로 가하면서 각 하중조건마다 세가지 비선형 요인의 효과를 조사한다. 이로부터 단일 자유도계의 공진주파수에서 파의 에너지는 존재하지 않지만 비선형 요인에 의해 응답 성분이 나타남을 보인다. 다음으로 Volterra 급수에 근거한 고차 전이함수(higher order transfer function)모델을 적용하여 유연한 단일 자유도계의 비선형 거동이 성공적으로 모델화됨을 보이며 또한 비선형성이 2차나 3차로 명백히 나타남을 보인다.

• Earthquakes and Structures
• /
• 제19권4호
• /
• pp.243-259
• /
• 2020

This study aims to optimize, design, and predict the MTMDs performance in SDOF systems using spectral analysis, and then apply their results to MDOF structures. Given the importance of spectral analysis in the design of new engineering structures, achieving a method for designing TMDs based on this theory can be of great importance for structural designers. In this study, several convenient combinations of MTMDs in an SDOF system are first considered to minimize the maximum displacement. For calculating the frequency ratios of dampers, an innovative technique is adopted in which the values of different modal responses obtained from the spectral analysis are approached together. This procedure is done using a harmony search (HS) algorithm. Also, using the random vibration theory, the damping ratio of the dampers is obtained. Then, an equation is presented for predicting the performance of MTMDs. For evaluating this equation, three structures with different stories are designed. Some of the presented combinations of dampers are added to them. The time history analyses are employed to analyze the structures under 30 different accelerograms. The findings indicated that the proposed equation could efficiently predict the performance of the MTMDs. Furthermore, four different patterns of damper distribution along the height of the structures are defined. The effect of them on the maximum deformation of the structures in time history analyses is discussed, and an equation is presented to estimate this effect. The results indicated that the average and maximum error percentages of the proposed equations are about three and seven percent, respectively, compared to the time history analyses results, which are negligible values.

• 한국지진공학회논문집
• /
• 제2권1호
• /
• pp.95-111
• /
• 1998

본 연구에서 구조요소 및 구조계에 대한 지진손상 해석방법의 개념 및 과정을 연구하였다. 구조요소에 대한 지진손상도 해석은 구조요소나 단자유도계에 관한 기존의 방법으로 가장 널리사용되고 있는 Park & Ang 방법에 의하여 예제구조물에 대하여 수행하였다. 구조계에 대한 지진손상도 해석을 수행하기 위해서는 두 가지의 과정을 사용하였다. 첫 번째 과정은 구조계에 해당하는 지진응답을 구조계 대표응답법과 등가단자유도계 응답법을 이용하여 구한 후, 구조계의 지진손상도는 기존의 단자유도계나 구조요소에 관한 방법을 이용하여 구조계의 지진응답으로부터 구한다. 두 번째 구조요소에 대한 지진손상도 해석결과를 손상지수 조합법을 이용하여 선형적으로 조합하여 구조계의 지진손상도를 구한다. 각 방법의 유용성은 몇 개의 다른 지진과 예제구조물에 대하여 비교를 통하여 연구하였다.

• Smart Structures and Systems
• /
• 제23권3호
• /
• pp.243-261
• /
• 2019

This paper introduces an appropriate technique to estimate the weighting matrices used in the linear quadratic regulator (LQR) method for active structural control. For this purpose, a parameter is defined to regulate the relationship between the structural energy and control force. The optimum value of the regulating parameter, is determined for single degree of freedom (SDOF) systems under seismic excitations. In addition, the suggested technique is generalized for multiple degrees of freedom (MDOF) active control systems. Numerical examples demonstrate the robustness of the proposed method for controlled buildings under a wide range of seismic excitations.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 추계 학술발표회 논문집
• /
• pp.213-220
• /
• 2002

본 연구에서는 최근에 개발된 Unscented Particle Filter (UPF)를 사용한 비선형 동적 구조계의 구조계수 규명기법이 연구되었다. 일반적인 비선형 구조계수 추정 문제의 일반 해는 존재하지 않으나, 그에 대한 대안으로써 선형 근사 기법인 extended Kalman filter (EKF)가 비선형 동적 구조계수의 추정에 주로 사용되어왔다. 그러나, EKF는 구간 선형(piecewise linear) 가정으로 인해 biased estimator이고 비선형성이 상대적으로 높을 때 오차가 큰 추정치를 주는 단점을 가진다. 이를 보완하기 위해서 UPF가 개발되었고, 이 기법은 particle filter의 일종으로써 Unscented Kalman filter (UKF)를 사용하여 importance proposal distribution을 생성한다. 수치실험이 SDOF와 MDOF에 대하여 3가지 경우에 대해서 수행되었다. 비선형 SDOF의 수치 실험으로부터 잡음이 가해진 상태에서 UKF가 EKF에 비해 초기 공분산 행렬의 가정에 대해 정확하고 강인한 추정결과를 보여줌을 보였다 최하층의 column에 비선형 거동이 발생하는 5층 전단 빌딩모형의 수치실험으로부터 UKF가 복잡한 구조물의 구조계수 추정능력이 있음을 보여주었다. 여러 가지 수치실험은 UPF가 EKF보다 비선형 동적 구조계수 추정에 있어서 더 나은 방법임을 보여 주었다.

• Smart Structures and Systems
• /
• 제14권6호
• /
• pp.1151-1172
• /
• 2014

This paper presents a user programmable computational/control platform developed to conduct real-time hybrid simulation (RTHS). The architecture of this platform is based on the integration of a real-time controller and a field programmable gate array (FPGA).This not only enables the user to apply user-defined control laws to control the experimental substructures, but also provides ample computational resources to run the integration algorithm and analytical substructure state determination in real-time. In this platform the need for SCRAMNet as the communication device between real-time and servo-control workstations has been eliminated which was a critical component in several former RTHS platforms. The accuracy of the servo-hydraulic actuator displacement control, where the control tasks get executed on the FPGA was verified using single-degree-of-freedom (SDOF) and 2 degrees-of-freedom (2DOF) experimental substructures. Finally, the functionality of the proposed system as a robust and reliable RTHS platform for performance evaluation of structural systems was validated by conducting real-time hybrid simulation of a three story nonlinear structure with SDOF and 2DOF experimental substructures. Also, tracking indicators were employed to assess the accuracy of the results.

• Earthquakes and Structures
• /
• 제14권2호
• /
• pp.155-165
• /
• 2018

Methods based on nonlinear static analysis as simple tools could be used for the seismic analysis and assessment of structures. In the present study, capability of the N2 method as a well-known nonlinear analysis procedure examines for the estimation of the damage index of multi-storey reinforced concrete frames. In the implemented framework, equivalent single-degree-of-freedom (SDOF) models are utilized for the global damage estimation of multi-degree-of-freedom (MDOF) systems. This method does not require high computational analysis and subsequently decreases the required time of seismic design and assessment process. To develop the methodology, RC frames with period range from 0.4 to 2.0 s under 40 records are studied. The effectiveness of proposed technique is evaluated through numerical study under near- and far-field earthquake ground motions. Finally, the results of developed models are compared with two other simplified schemes along with nonlinear time history analysis results of multi-storey frames. To improve the accuracy of damage estimation, a modified relation is presented based on the N2 method results for near- and far-field earthquakes.