• 대한전자공학회논문지SD
• /
• 제46권7호
• /
• pp.39-46
• /
• 2009

본 논문에서는 LED 백라이트를 위한 고속 스위칭 전류-펄스 드라이버(Current-Pulse Driver)를 제안하였다. 제안한 전류-펄스 드라이버는 드레인 정규화 전류미러(Regulated Drain Current Mirror : RD-CM)[1]와 고전압 NMOS 트랜지스터(High-Voltage NMOS Transistor : HV-NMOS)로 구성되었다. 동적 gain-boosting 앰프(Dynamic Gain-Boosting Amplifier : DGB-AMP)를 사용하여 전류-펄스 스위칭 응답속도를 향상시켰다. 출력 전류-펄스 스위치가 꺼졌을 때, RD-CM의 HV-NMOS 게이트 커패시턴스에 충전된 전하가 방전되지 않기 때문에 스위치가 다시 켜졌을 때, HV-NMOS 게이트 커패시턴스를 다시 충전할 필요가 없다. 제안한 전류-펄스 드라이버에서는 게이트 커패시턴스의 반복적인 충 방전 시간을 제거함으로써 전류-펄스 스위칭 동작을 고속으로 하도록 하였다. 검증을 위하여 SV/40V 0.5um BCD 공정으로 칩을 제작하였다. 제안한 전류-펄스 드라이버의 스위칭 지연시간을 기존 드라이버에서의 700ns에서 360ns로 줄일 수 있었다.

• 대한전자공학회논문지SD
• /
• 제44권8호
• /
• pp.8-15
• /
• 2007

본 논문에서는 산화된 다공질 폴리실리콘을 이용하여 전계 방출 소자를 제작하여, 각각의 픽셀에 따른 전기적 특성과 형광체의 발광 특성을 조사하였다. 실제 대면적 디스플레이 소자에 적용하기 위해서 PM 방식을 이용해서 소자를 픽셀별로 동작하였고, 상부금속 전극의 어레이에 따른 두께와 폭의 공정조건을 확립하였다. 산화된 다공질 폴리실리콘의 미세 구조를 분석하고, 각각의 픽셀에 따른 전계방출 특성을 조사해 보았다. 상부금속 전극의 두께와 폭에 따른 전자방출 특성을 조사해 본 결과 Ti/pt(2nm/7nm)가 가장 적절한 두께라는 것을 확인 할 수 있었고, 2.5 mm 이상 폭에서 전자방출 효율이 증가하는 모습을 확인 할 수 있었다. 각 픽셀에 따른 소자의 전기적 특성은 픽셀마다 조금씩의 차이는 있지만 거의 동일한 누설 전류와 방출 전류가 나타남을 확인할 수 있었고, 동일한 크기의 효율도 관찰할 수 있었다. 누설 전류와 방출 전류는 시간이 증가함에 따라 감소하는 모습이 나타나긴 하였으나, 모든 픽셀이 거의 동일하게 감소하였다. 각각의 픽셀에 따른 휘도는 큰 차이가 없음을 확인할 수 있었고, 20 V에서 $700cd/m^2$ 이상의 높은 휘도를 나타내었으므로 실제 디스플레이 소자로도 응용이 가능할 것이다.

• 대한전자공학회논문지SD
• /
• 제48권2호
• /
• pp.14-19
• /
• 2011

본 논문에서 실리콘 기판 위에 성장된 GaN 에피탁시를 활용하여 고전압 쇼트키 장벽 다이오드를 제작하였으며, 금속-반도체 접합의 열처리 조건에 따른 GaN 완충층 (buffer layer) 누설전류와 제작된 다이오드의 전기적 특성 변화를 연구하였다. Ti/Al/Mo/Au 오믹 접합과 Ni/Au 쇼트키 접합이 제작된 소자에 설계 및 제작되었다. 메사를 관통하는 GaN 완충층의 누설전류를 측정하기 위하여 테스트 구조가 제안되었으며 제작하였다. $700^{\circ}C$에서 열처리한 경우 100 V 전압에서 측정된 완충층의 누설전류는 87 nA이며, 이는 $800^{\circ}C$에서 열처리한 경우의 완충층의 누설전류인 780 nA보다 적었다. GaN 쇼트키 장벽 다이오드의 누설전류 메커니즘을 분석하기 위해서 Auger 전자 분광학 (Auger electron spectroscopy) 측정을 통해 GaN 내부로 확산되는 Au, Ti, Mo, O 성분들이 완충층 누설전류 증가에 기여함을 확인했다. 금속-반도체 접합의 열처리를 통해 GaN 쇼트키장벽 다이오드의 누설전류를 성공적으로 감소시켰으며 높은 항복전압을 구현하였다.

• Journal of Nutrition and Health
• /
• 제34권1호
• /
• pp.54-61
• /
• 2001

The Ca and P balance studies were carried out with two different diets varying Ca levels : the current Korean RDA level(normal Ca diet) and the high level (High Ca diet) which was determined by adding 2SD to mean Ca intake of all subjects. The subjects were sever healthy adult woman, aged from 25 to 32 years old. The metabolic studies were conducted for two weeks with a days recess in between : during the fist week with normal Ca diet and during the second week with high Ca diet. The composition of nutrients excepting Ca of both diets was similar to subjects usual intake. The result were summarized as follows: Mean daily Ca intake was 728.8mg from norma Ca diet and 945.5mg from high Ca diet. Fecal excretion of Ca increased significantly(p<0.05) on high Ca diet, but urinary excretion of Ca did not show any differences between the two diet periods. There were also no significant differences in Ca retention between the two diet periods but it tended to be greater during high Ca diet period: 112.1mg/day during normal Ca diet period vs 208.2mg/day during high Ca diet period. Mean apparent Ca absorption was 41.2% on normal Ca diet and 42.1% on high Ca diet, indicating it was not affected by high Ca intake level used in this study. On the contrary, P retention was significantly increased up to 109.4mg/day with high Ca diet as compared to- 41mg/day with normal Ca diet. There were no significant differences in fecal and urinary excretion of P but those to be lower during high Ca diet period. The above results showed that higher Ca intake more than current RDA(700mg/day), in the level of 945.5mg/day, could increase Ca retention through Ca absorption comparable to the rate appeared on RDA level intake. P retention was also improved by high Ca intake. Therefore, higher Ca intake than the current RDA level seemed to produce favorable effects on bone health in adult women. However, the current RDA level seemed to be relatively appropriate, considering the results that all the subjects but one maintained positive Ca balance with normal Ca diet. (Korean J Nutrition 34(1):54-61, 2001)

• 대한치과기공학회지
• /
• 제34권2호
• /
• pp.105-111
• /
• 2012

Purpose: The purpose this study was to evaluate the marginal fitness of metal copings fabricated using rapid prototyping method and to compare the fitness with copings by conventional method. Then clinical availability of fixed dental prostheses (FDPs) fabricated using rapid prototyping method shall be confirmed based on marginal fitness. Methods: Ten same cases of3 unit FDPs epoxy models (abutment teeth 14 and 16) were manufactured. Each of ten epoxy models were scanned by 3shape D-700 scanner to be designed by experienced technician, and photopolymer 3 unit FDPs were fabricated using rapid prototyping methodand fabricated using Lost wax technique (LW) with same models. Marginal fitness of 3 unit FDPs were measured by silicone replica technique. T-test of independent sample for statistical analysis was executed with SPSS 12.0K for Windows. (${\alpha}$=.05) Results: Significantly higher mean (SD) marginal fitness (P<.000) were observed in the RP group $(95.9(18.0){\mu}m$ compared to the conventionally LW group $(80.1(13.8){\mu}m$. Conclusion: Marginal fitness of LW group showed excellent rather than RP group. However marginal fitness of 3 unit FDPs fabricated by RP method did not get out of clinical allowance value range significantly to allow clinical application.

• 대한가정학회지
• /
• 제42권9호
• /
• pp.111-134
• /
• 2004

The purpose of this dissertation is firstly to examine the level of pro-environmental behavior of urban employed wives depending on their life style type and secondly to identify effective ways to promote their pro-environmental behavior. A structured questionnaire interview was conducted with 700 urban employed wives who lived in the Seoul Metropolitan area, and 566 of the responses were valid for analysis. For statistical analysis, this research reviewed the frequencies, percentage, mean, standard deviation(SD), Pearson's correlations, Cronbach's u, factor analysis, cluster analysis, ANOVA, $\chi$$^2$-test, Duncan's Multiple Range Test, and multiple regression using SPSS/PC WIN. The findings of analysis of the study are as follows: 1. Among life style types of employed wives, the order of ecological value was orientation type (37.3%), followed by economical value orientation type (25.8%), uninterested type (18.7%), and convenience-centric value orientation type (18.2%).Pro-environmental behavior scored relatively highly at 3.45 in average. 2. In the analysis of the relationship between life style and background variations, every variation except environmental knowledge was meaningful. 3. In the relationship between pro-environment behavior and background variations, every variation was meaningful except housing types, having helper or not, and environmental knowledge. 4. The recognition level of environmental pollution was important among the variations affecting pro-environmental behavior. 5. There was a difference in pro-environmental behaviors by the following life style types: ecological value orientation, economical value orientation, convenience centric orientation and uninterested. 6. For the relative contribution comparison of background variations (socio-economic variation and environmental variation) and life style variations to the pro-environmental behavior of urban empolyed wives, this research additionally applied each independent variable group. As a result, the explanation level drastically increased in the third step that analyzed the relationship with life style.

• 치위생과학회지
• /
• 제10권3호
• /
• pp.177-183
• /
• 2010

탄성 고무인상재의 종류인 폴리설파이드(polysulfide), 폴리이써(polyether), 부가중합형 실리콘(addition silicone)에서 점주도(consistency)가 Type III인 인상재를 각각 1종류 선택하여 증류수 $3.3{\mu}l$를 떠뜨려 접촉각을 측정하고, 세 종류의 인상체에 치과용 경석고를 부어 작업모형을 만들고 표면을 관찰하였다. 접촉각 측정은 전자동접촉 각 측정시스템(DM-700, KYOWA, Japan)을 이용하였고 작업모형의 표면관찰은 전계 방사형 주사 전자현미경(JSM-6700F, JEOL Ltd., JAPAN)을 이용하여 다음과 같은 결론을 얻었다. 1) 초기 접촉각의 평균과 표준편차는 부가중합형실리콘, 폴리이써, 폴리설파이드 제품이 각각 $91.3^{\circ}{\pm}20.5$, $90.0^{\circ}{\pm}2.2$, $101.5^{\circ}{\pm}2.3$로 평균값은 유사하게 나타났으나 부가중합형실리콘의 표준편차값에서 큰 차이를 보여줬다. 이는 술자의 술식에 따라 항상 일정한 특성을 보여주지 않는 다는 것이다. 2) 시간이 흐를수록 부가중합형실리콘 제품은 다른 두 종류에 비해 접촉각이 급속히 감소함을 관찰 할 수 있었고, 초기접촉각이 $91.3^{\circ}$이며 25초 후 $29.4^{\circ}$로 급격히 감소했다. 3) 폴리이써 제품은 초기접촉각이 $101.5^{\circ}$에서 25초 후의 접촉각 $90.7^{\circ}$이였고, 폴리설파이드 제품은 초기접촉각이 90.0에서 25초 후의 접촉각 84.2로 변화가 거의 일어나지 않았고 그 각도도 부가중합형실리콘에 비해 컸다. 4) 세 종류의 탄성고무인상재에서 시간이 흐름으로써 관찰된 접촉각은 유의성이 있었다(p<0.001). 5) 작업모형의 표면관찰에서 부가중합형실리콘이 가장 치밀했고, 그 다음 폴리설파이드, 폴리이써 순서였다. 따라서 탄성고무 인상재에 있어서 접착각이 작은 부가중합형 실리콘은 폴리이써나 폴리설파이드 제품에 비해 더 치밀한 작업모형을 얻을 수 있었고 세 종류의 인상재접착각에서 큰 유의성을 보였다. 그러나 부가중형 실리콘은 접촉각의 편차가 커 술자의 주의가 필요한 것으로 나타났고 폴리설파이드 제품과 폴리이써 제품은 20~25초 후 접촉각이 최초 접촉각과 큰 차이를 보이지 않아 소수성 제품으로 인상채득 시 주의가 요망되는 것으로 보여진다. 향후 Vitro 상태에서 인상재에 영향을 미치는 여러가지 요인들에 대한 계속적인 연구의 필요성을 느낀다.

• 대한전자공학회논문지SD
• /
• 제43권12호
• /
• pp.15-22
• /
• 2006

본 논문에서는 UWB(Ultra Wide Band)통신시스템을 위한 1.8V 8-bit 500MSPS의 D/A 변환기를 제안한다. 전체적인 D/A 변환기의 구조는 높은 선형성과 낮은 글리치 특성을 갖는 상위 6-MSB(Most Significant Bit) 전류원 매트릭스(Current Cell Matrix)와 하위 2-LSB(Least Significant Bit) 전류원 매트릭스로 구성된 2단 매트릭스 구조로 설계하였다. 또한 동일한 지연시간을 갖는 Thermometer Decoder와 고속 동작에서 전력을 최소화하기 위한 저 전력 스위칭 디코더(Current Switching Decoder Cell)를 제안함으로서 D/A 변환기의 고속 동작에서 성능을 향상시켰다 설계된 DAC는 1.8V의 공급전압을 가지는 TSMC $0.18{\mu}m$ 1-poly 6-metal N-well CMOS 공정으로 제작되었으며, 제작된 D/A 변환기의 측정결과, 매우 우수한 동적성능을 확인하였다. 500MHz 샘플링 클럭 주파수와 50MHz의 출력신호에서 SFDR은 약 49dB, INL과 DNL은 각각 0.9LSB, 0.3LSB 이하로 나타났으며, 이 때의 전력소비는 약 20mW로 기존의 8-bit D/A변환기에 비해 매우 낮음을 확인 할 수 있었다 D/A 변환기의 유효 칩 면적은 $0.63mm^2(900um{\times}700um)$이다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.77-77
• /
• 1998

Present silicon dioxide (SiOz) 떠m as intennetal dielectridIMD) layers will result in high parasitic c capacitance and crosstalk interference in 비gh density devices. Low dielectric materials such as f f1uorina뼈 silicon oxide(SiOF) and f1uoropolymer IMD layers have been tried to s이ve this problem. I In the SiOF ftlm, as fluorine concentration increases the dielectric constant of t뼈 film decreases but i it becomes unstable and wa않r absorptivity increases. The dielectric constant above 3.0 is obtain어 i in these ftlms. Fluoropolymers such as polyte$\sigma$따luoroethylene(PTFE) are known as low dielectric c constant (>2.0) materials. However, their $\alpha$)Or thermal stability and low adhesive fa$\pi$e have h hindered 야1리ru뚱 as IMD ma따"ials. 1 The concept of a plasma processing a찌Jaratus with 비gh density plasma at low pressure has r received much attention for deposition because films made in these plasma reactors have many a advantages such as go여 film quality and gap filling profile. High ion flux with low ion energy in m the high density plasma make the low contamination and go어 $\sigma$'Oss피lked ftlm. Especially the h helicon plasma reactor have attractive features for ftlm deposition 야~au똥 of i앙 high density plasma p production compared with other conventional type plasma soun:es. I In this pa야Jr, we present the results on the low dielectric constant fluorocarbonated-SiOF film d밑JOsited on p-Si(loo) 5 inch silicon substrates with 00% of 0dFTES gas mixture and 20% of Ar g gas in a helicon plasma reactor. High density 띠asma is generated in the conventional helicon p plasma soun:e with Nagoya type ill antenna, 5-15 MHz and 1 kW RF power, 700 Gauss of m magnetic field, and 1.5 mTorr of pressure. The electron density and temperature of the 0dFTES d discharge are measUI벼 by Langmuir probe. The relative density of radicals are measured by optic허 e emission spe따'Oscopy(OES). Chemical bonding structure 3I피 atomic concentration 따'C characterized u using fourier transform infrared(FTIR) s야3띠"Oscopy and X -ray photonelectron spl:’따'Oscopy (XPS). D Dielectric constant is measured using a metal insulator semiconductor (MIS;AVO.4 $\mu$ m thick f fIlmlp-SD s$\sigma$ucture. A chemical stoichiome$\sigma$y of 야Ie fluorocarbina$textsc{k}$영-SiOF film 따~si야영 at room temperature, which t the flow rate of Oz and FTES gas is Isccm and 6sccm, res야~tvely, is form려 야Ie SiouFo.36Co.14. A d dielec$\sigma$ic constant of this fIlm is 2.8, but the s$\alpha$'!Cimen at annealed 5OOt: is obtain려 3.24, and the s stepcoverage in the 0.4 $\mu$ m and 0.5 $\mu$ m pattern 킹'C above 92% and 91% without void, res야~tively. res야~tively.

• 한국응급구조학회지
• /
• 제8권1호
• /
• pp.87-104
• /
• 2004

This study selected the fifth and sixth graders of elementary school in Jeollanamdo who can express their opinions of safety consciousness and understand the items of questionnaire as the population. It selected 10 elementary schools under the supervision of Jeonnam Board of Education and sampled 700 students randomly from 2-3 classes in the 5th and the 6th grade. One preliminary survey was conducted to revise and complement the contents and forms of questionnaire with 70 students of a school from Apr. 1 to 6, 2004 and this study was conducted from Apr. 10 to 30, 2004. Data of this study were collected by explaining the purport of study to subjects after obtaining approval of principal and teacher of the school and distributing questionnaires. Total 700 questionnaires were distributed and 681 were collected (97%) and 602 were used for final analysis except 79 lacking responses. The results of this study are as follows. According to demographical characteristics of subjects, 'male' students were 302(50.%) and 'female' students were 300(49.8%) by sex and 'the 5th graders' were 285(47.3%) and 'the 6th graders' were 317(52.7%) in grade distribution. Residents at 'apartment house' were 406(67.4%) in residence type, 'going to school by foot' was 477 students(79.2%), 'high school graduates' were 297(49.3%) in fathers' education, 'high school graduates' were 366 (60.8%) in mothers' education, 'professional and office workers' were 231(38.4%) in fathers' job, 'full-time workers' were 283(47.0%) in mothers' job, and the number of siblings was one except myself in 343 students(57.0%). Respondents on the level of class showing 'good' were 340(56.5%) and those on the degree of adaptation to school life showing 'active' were 349(58.0%). On the characteristics related to safety education, 360(59.8%) responded it was 'very necessary', on the frequency of safety education at school for last one year, 339(56.3%) responded they had 'once or twice', on the frequency of safety education by parents, 279(46.3%) responded they 'often' had it, on the level of safety practice by parents, 347(57.6%) responded they practiced it 'frequently', on the source of knowledge of safety, 223(37.0%) responded they got it from 'parents, siblings and relatives', on the degree of recognizing the need of safety education textbooks, 295(38.5%) responded 'it was needed', on the recognition of necessity of teacher for safety education, 271(45.0%) answered it was very necessary', and on the recognition of qualification of teacher for safety education, 370(61.5%) answered it was 'paramedic'. The mean score of safety consciousness of subjects was 2.72 (SD. 21) of full score 3, having high score over mean score. According to each area, the area showing the highest safety consciousness was safety of fire(2.83), followed by home safety(2.76) and first-aid treatment(2.76), traffic safety(2.71), play and leisure safety(2.66) and school safety(2.56). Items showing statistical differences in the degree of safety consciousness according to demographical characteristics were sex(t=-3.11, p=.002), education(t=2.33, p=.021) and number of siblings(F=3.729, p=.011). In the difference of safety consciousness between both sexes, 'female' students(2.75) showed higher safety consciousness than 'male' students (2.69), and the former also showed higher safety consciousness than the latter in all six areas of school safety, play and leisure safety, traffic safety, fire safety, home safety and first-aid treatment, and there were statistical differences in the areas of play and leisure safety, traffic safety, fire safety and first-aid treatment. According to the differences of safety consciousness by grade, 'the fifth graders'(2.74) showed higher safety consciousness than 'the sixth graders'(2.70) and the former also showed higher safety consciousness than the latter in all six areas of school safety, play and leisure safety, traffic safety, fire safety, home safety and first-aid treatment, and there were statistical differences in the areas of fire safety and home safety. In the safety consciousness by the number of siblings, 'single son or daughter' (2.78) was highest and their safety consciousness was also highest in all six areas of school safety, play and leisure safety, traffic safety, fire safety, home safety and first-aid treatment, and there were statistical differences in the areas of school safety, fire safety and home safety, There were statistically remarkable differences in degree of adaptation to school life (F=15.349, p=.000) and perceived schooling level(F=9.552, p=.000). According to the degree of safety consciousness related to characteristics of safety education, there were statistical differences at the degree of recognizing the need of safety education(F=9.797, p=.000), degree of safety education at school(F=2.595, p=.006), degree of safety education by parents(F=12.709, p=.000), degree of practicing safety by parents(F=17.579, p=.000), source of knowledge of safety education (F=2,715, p=.044), necessity of safety education textbooks(F=3.972, p=.008), need of safety teacher(F=4.137, p=.006) and qualification standard of safety teacher(F=3.016, p=.029).