• 한국분무공학회지
• /
• 제11권1호
• /
• pp.30-38
• /
• 2006

High temperature furnaces such as power plant and incinerator contribute considerable part of NOx generation and face urgent demand of De-NOx system. Reducing agent is injected into the flue gas flow to activate do-NOx system. Almost SCR system adopt vaporized ammonia injection system. Vaporizer, dilution system and additional space are needed to gasify and inject ammonia. Liquid spray injection system can simplify and economize post-treatment system of flue gas. In this study, mixing caused by gas or liquid injection of reducing agent into flue gas duct was investigated experimentally. Carbonated water was used as tracer and simulated agent and mixing of liquid spray in a duct flow was studied. To achieve that, the angle of attack of static mixer is simulated and $CO_2$ concentration is measured.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1010-1011
• /
• 2008

본 연구는 도금용 정류기의 성능개선 및 부피저감을 위해 PWM 방식의 정류기 구성에 관한 것이다. 제안된 PWM(Pulse- width modulation) 정류기는 기존의 SCR 정류기에 비하여 전류제어기의 속응성을 개선 할 수 있었으며, 그 사이즈 면에서 기존방식에 비하여 대폭감소할 수 있었다. 또한 출력전압 15[V], 출력전류 1,000[A]인 15[Kw]급 PWM정류기 프로토타입을 제작 및 실험을 통하여 그 타당성을 입증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2189-2191
• /
• 1999

To improve the reliability of the klystron-modulator systems, the stable operations of the thyratron an important factor of the system are required. The thyratron always has a possibility of self-fire according to the conditions of the applied high voltage and this induces the system fault. Therefore a command charging method was introduced to reduce the applied tim8 of the high voltage into the thyratron. The high voltage switch used in the command charging method is the SCR (1.6 kV, 50A) and consists of 10 SCRs in series to discharge 10 kV. A pulse transformer was used to apply the trigger pulse. The objectives of this research are the fabrication of the semiconductor switch and the study of the experimental result of the operation characteristics of the high voltage semiconductor switch.

• 전기의세계
• /
• 제14권2호
• /
• pp.1-7
• /
• 1965

This paper describes the commutation current and ignition angle of current which occures in the combination of silicon rectifier with synchronous generator when the constants of rectifier circuits parameters are changed. This is precisely accomplished by setting-up the analog computer with voltage generating circuits and non-linear elements circuits. When the characteristics of rectification are properly selected in the simulation, this method is able to extend to the connection of SCR and electric machinery. We also expect that this method is helpful to the investigation of characteristics, and design of alternating exciters, self-excited synchronous generators instead of D-C machines.

• 한국수소및신에너지학회논문집
• /
• 제29권1호
• /
• pp.19-24
• /
• 2018

Fuel cells are used to generate electricity with a reformer. In particular, methanol has various advantages among the fuels for reformer. Methanol steam reformer devices can efficiently supply hydrogen to PEM fuel cell. This study investigated the optimal operation conditions of a methanol steam reforming process. For this purpose, aspen HYSYS was used for the optimization of reforming process. The optimal operating condition could be designed by setting independent variables such as temperature, pressure and steam to carbon ratio (SCR). The optimal temperature and steam to carbon ratio were $250-270^{\circ}C$ and 1.3-1.5, respectively. It is advantageous to operate at a pressure of 15-20 barg, considering the performance of the hydrogen purifier. In addition, a heat exchange network was designed to supply heat constantly to reformer through the latent heat of steam.

• 한국농공학회지
• /
• 제28권1호
• /
• pp.51-59
• /
• 1986

Through the hydraulic model test, a more convenient and accurate method of deter- mining discharge coefficients in the sluice type of tide gates can be derived by the use of aubmergence ratio as a parameter. The results obtained are summarized as follows; 1. Discharge coefficients under submerged flow conditions can be obtained by the application of sutmergerice ratio (S) to the free flow equation of the broad-erested we r. 2. The critical submergence ratios (Scr) for the flat basin and the broad-crested types of sill have the same value of 0.8. 3. Under free flow conditions, the discharge coefficient (m) are 0.37 and 0. 35 for the flat basin and the broad-crested types of sill respectively. However, when submerged flow condition exists, the discharge coefficients for both types of sill is given by a regression equation of discharge coefficients (IL) on submergence ratios (8) expressed as; m 1.3- 1. 17S. 4. The relationships between S and Froude number (Fr), for the flat basin and the broad-crested types of sill are Fr=2. 79-2.495 and Fr2.5=5. 7-6.16S respectively. From the above relationships, it can be concluded that m can also be expressed in terms of the Froude number which is a very relevant hydraulic parameter of the open channel hydraulics.

• 대한기계학회논문집B
• /
• 제37권8호
• /
• pp.717-724
• /
• 2013

Urea-SCR은 동절기, 북유럽과 북미지역과 같은 $-20^{\circ}C$ 이하의 환경에서 요소수가 동결되는 문제점을 해결해야 한다. 따라서 이러한 요소수 저장탱크에 해동 시스템을 적용하여 시동 초기, 요소수를 적정 시간 내 분사하기 위한 기술의 확보가 필요하다. 본 연구에서는 저장탱크 내 요소수의 동결현상과 냉각수 순환 가열방식을 적용한 해동현상에 대하여 상용 소프트웨어인 Fluent 6.3을 이용하여 3차원 비정상상태 수치해석을 수행하였다. 이를 통하여 요소수의 동결 및 해동과정 중 나타난 온도분포, 상경계면, 그리고 액상분율을 분석하여 열전달 특성을 고찰하였다. 결론적으로 요소수의 동결은 저장탱크 벽면으로부터 중심부로 이루어졌으며, 해동현상은 순환 파이프와 인접할수록 요소수의 상변화가 빠르게 진행하였다. 또한, 냉각수의 $70^{\circ}C$, $200{\ell}/h$ 조건에서 $1{\ell}$의 액상 요소수를 얻는데 약 190초의 시간이 필요하였다.

• 자원리싸이클링
• /
• 제33권3호
• /
• pp.30-37
• /
• 2024

본 연구에서는 탈질 폐촉매 침출액으로부터 바나듐 환원과 Alamine 336을 이용한 용매추출에 의해 바나듐과 텅스텐의 분리 가능성을 조사하고 최적 공정 조건을 도출하기 위한 실험을 수행하였다. 바나듐과 텅스텐은 화학적 거동이 비슷하여 분리가 어렵지만 산성용액에서 일부 존재하는 음이온 상태의 5가 바나듐을 양이온 상태의 4가 바나듐으로 환원시켜 음이온 교환 추출제에 의한 추출을 억제할 경우 텅스텐을 선택적으로 추출할 수 있다. 실험 결과, 환원제로 NaHSO₃가 가장 적합하였으며 환원제 첨가량, 반응 시간, 온도가 증가할수록 바나듐의 추출 효율이 감소하여 분리 효율이 증가하였다. 최적 환원 조건인 NaHSO₃ 1.5당량, 60분, 60℃ 조건에서 환원할 경우, 바나듐 추출 효율 5.8%, 텅스텐 추출 효율 99%, 바나듐과 텅스텐의 분리 계수 7,564로 두 성분이 효과적으로 분리되었다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2008년도 한국우주과학회보 제17권2호
• /
• pp.34.1-34.1
• /
• 2008

Cosmic ray (CR)s are energetic particles that are found in space and filter through our atmosphere. They are classified with galactic cosmic ray (GCR)s and solar cosmic ray (SCR)s from their origins. The process of a CR particle colliding with particles in our atmosphere and disintegrating into smaller pions, muons, neutrons, and the like, is called a cosmic ray shower. These particles can be measured on the Earth's surface by neutron monitor (NM)s. Regarding with the space weather, there are common types of short term variation called a Forbush decrease (FD) and a Ground Level Enhancement (GLE). In this talk, we will briefly introduce our recent studies on CRs observed by NM: (1) simultaneity of FD depending on solar wind interaction, (2) an association between GLE and solar proton events, and (3) diurnal variation of the GCR depending on geomagnetic cutoff rigidity. NM will provide a crucial information for the Korea Space Weather Prediction Center (KSWPC).

• Journal of Power Electronics
• /
• 제17권1호
• /
• pp.272-281
• /
• 2017

The DC circuit breaker is essential for supplying stable DC power with the advent of DC transmission/distribution and sensitive loads. Compared with mechanical circuit breakers, which must interrupt a very large fault current due to their slow breaking capability, a solid-state circuit breaker (SSCB) can quickly break a fault current almost within 1 [ms]. Thus, it can reduce the damage of an accident a lot more than mechanical circuit breakers. However, previous DC SSCBs cannot perform the operating duty, and are not economical because many SCR are required. Therefore, this paper proposes a new DC SSCB suitable for DC grids. It has a low semiconductor conduction loss, quick reclosing and rebreaking capabilities. As a result, it can perform the operating duties of reclosing and rebreaking. The proposed DC SSCB is designed and implemented so that it is suitable for home dc distribution at a rated power of 5 [kW] and a voltage of 380 [V]. The operating characteristics are confirmed by simulation and experimental results. In addition, this paper suggests design guidelines so that it can be applied to other DC grids. It is anticipated that the proposed DC SSCB may be utilized to design and realize many DC grid systems.