• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.306-306
• /
• 2012

본 연구에서는 태양전지 소자의 온도에 따른 전류-전압(I-V) 특성 변화를 통해 태양전지 다이오드의 전기적 특성을 분석하였다. 상온 조건의 경우 공핍층 영역(SCR)과 준중성 영역(QNR)에서 각각 3.02와 1.76의 이상 계수 값을 보였으며, 온도가 300 K에서 500 K으로 상승함에 따라 SCR 영역에서는 감소하는 경향을, QNR 영역에서는 증가하는 경향을 보였다. 이는 온도 상승에 따른 공핍층 영역에서의 캐리어 흐름 증가와 대면적 공정 과정에서의 오염물 침투 및 dangling bond 등의 결함으로 인한 bulk 에서의 캐리어 재결합에 따른 것으로 판단된다. 또한 텍스처링 공정에 따른 태양전지 소자의 접합면 균일성 확인을 위한 I-V 측정 결과 SCR 영역에서는 40.87%의 평균 전류 분산을, QNR 영역에서는 10.59%의 평균 전류 분산을 보였다. 이는 텍스처링 공정으로 형성된 접합면에서의 피라미드 구조가 원인이 되는 것으로 판단되며, 전체 다이오드 전류 흐름에 영향을 주게 된다. 이러한 공정 과정에서의 결함 및 접합 구조로 인해 태양전지 다이오드는 일반 다이오드에 비해 비이상적인 전기적 특성을 보이게 된다.

• Korean Journal of Metals and Materials
• /
• v.46 no.12
• /
• pp.823-829
• /
• 2008

The solvent extraction process for the recovery of vanadium from leaching solution of SCR(selective catalytic reduction) spent catalyst was investigated by using Alamine336 as an extractant. The effects of experimental conditions, such as initial pH and concentration of sulfate ion, and ammonia concentration of stripping solution were studied. The extraction percentage of vanadium were increased with the increase of initial pH of leaching solution and decreased with the increase of sulfate ion. More than 99% of vanadium in leaching solution were extracted and stripped at the A/O ratio of 1.0 in 2 stages. On the basis of these results, an optimum solvent extraction process which vanadium was effectively recovered from SCR spent catalyst was proposed.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.307-313
• /
• 2019

In order to design efficient Urea Decomposition Chamber (UDC) for the Low Pressure (LP) Selective Catalytic Reduction (SCR) system, numerical simulations were conducted with respect to various design parameters. The design parameters examined in this simulation include the chamber diameter, inlet and outlet shape of chamber, and urea injection point. Reaction kinetics for the urea decomposition was proposed and validated with the experimental data in the range of $300{\sim}450^{\circ}C$. The effects of design parameters on the performance of UDC were evaluated by the calculated urea conversion and pressure drop. As a result, the local optimum design values were derived by the parametric study.

• Journal of Hydrogen and New Energy
• /
• v.21 no.6
• /
• pp.519-525
• /
• 2010

Ethanol was used as reductant to remove $NO_x$ over Ag/$Al_2O_3$ catalyst via SCR from stationary emission source. Among the tested hydrocarbon reductants, ethanol showed highest de-$NO_x$ performance over the Ag/$Al_2O_3$ catalyst. De-$NO_x$ efficiency of about 83% was obtained in the condition of GHSV 20,000 $hr^{-1}$, $NO_x$ 200 ppm, CO 200 ppm, $O_2$ 13%, $H_2O$ 5% and mole ratio of ethanol/$NO_x$ = 2 between temperature of $300^{\circ}C$ and $400^{\circ}C$. While $SO_2$ presence in the $NO_x$ exhaust suppressed the catalytic activity, catalyst with acid (0.7% $H_2SO_4$) treatment of catalyst showed higher catalytic activity, where In-Situ DRIFT showed S presence over catalyst surface was increased after acid treatment of catalyst. From in-situ DRIFT and SCR results, it was concluded that sulfur presence over the surface of Ag/$Al_2O_3$ catalyst was the dominant factor to control the de-$NO_x$ reaction yield via HC-SCR from the exhausted gas including $SO_2$.

• Journal of Korean Society for Atmospheric Environment
• /
• v.33 no.6
• /
• pp.605-615
• /
• 2017

Efficient simultaneous reduction conditions for $NO_x$ and $NH_3$-slip was investigated in SCR (Selective Catalytic Reduction) process with load variation by applying dual catalysts (SCR catalyst, $NH_3$ decomposition catalyst) system. $N_2O$ formation characteristics were analyzed to look into possible undesirable reaction pathways. In the experiments of catalyst characteristics, various operational variables were tested for the combined catalytic system, such as $NH_3/NO_x$ ratio, temperature, oxygen concentration and $H_2O$. The reaction characteristics of $NO_x$, $NH_3$ and $N_2O$ were analyzed and optimal conditions could be evaluated for the combustion facility with varied load. In terms of $NO_x/NH_3$ simultaneous reduction and $N_2O$ formation suppression, optimal condition was considered NSR 1.2 and temperature $300^{\circ}C$. At this operational condition, $NO_x$ conversion was 98%, $NH_3$ reduction efficiency was 95%, generated $N_2O$ concentration 9.5 ppm with inlet $NO_x$ concentration of 100 ppm. In $NH_3-SCR$ process with $NH_3$ decomposition catalyst, $NO_x$ and $NH_3$ can be considered to be reduced simultaneously at limited conditions. The results of this study may be utilized as basic data at facilities requiring simultaneous $NO_x$ and $NH_3$ reduction for facilities with load variation.

• Journal of Hydrogen and New Energy
• /
• v.22 no.2
• /
• pp.265-273
• /
• 2011

HC-SCR was conducted using Fe/ZSM5 catalyst coated over 200 cpi cordierite in the conditions of atomspheric pressure and $200^{\circ}C-500^{\circ}C$. Among the tested hydrocarbon reductants, isobutane (i-$C_4H_{10}$) showed the highest de-$NO_x$ yield of 69% at $320^{\circ}C$ with the mole ratio of reductant/$NO_x$ =1.0. De-$NO_x$ yield resulted by the change of alkane reductant was increased as the carbon number of alkane reductant was increased. The order of increase of de-$NO_x$ yield was proportional to the order of decrease of bonding energy between C and H of reductant, where the H abstraction step from alkane molecule could be the rate controlling step of HC-SCR.

• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.1 s.38
• /
• pp.31-35
• /
• 2006

This paper is studied on a protective control system for electrical fire used electrical characteristics of SCR and multilayer-type PTC thermistor. The PTC thermistor has characteristic or positive resistivity temperature coefficient according to the temperature variation, which is construction of a regular square and cube demarcation with $BaTiO_{3_}$Ceramics of positive temperature coefficient. Also PTC shows the phenomenon which is rapidly increased in the resistivity if the temperature is increased over Curie temperature point. This paper is proposed on a protective control system used multilayer-type PTC which is protected from electrical fire due to electric short circuit faults or overload faults. Some experimental results of the proposed apparatus is confirmed to the validity of the analytical results.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.3
• /
• pp.179-187
• /
• 2008

A mathematical modeling of $NO_x$ reduction in $NH_3$-SCR process is conducted. The present deterministic model solves one-dimensional conservation equations of mass and species concentrations for channel flows and the catalytic reaction. NO and NO_2$ reactions by the vanadium catalyst in the presence of $NH_3$ are calculated with the rate expressions of Langmuir-Hinshelwood scheme. The modeling was validated with extensive empirical data regarding $NO_x$ reduction efficiency. Analysis of De-$NO_x$ sensitivity conducted with regard to oxygen and water yielded highly accurate prediction over a wide range of $NO_2/NO_x$ ratios from 0 to 1 in a temperature range of $200^{\circ}C{\sim}550^{\circ}C$. The $NO_x$ reduction largely depends on $NO_2/NO_x$ ratio at temperatures lower than $300^{\circ}C$. NO reduction efficiency is significantly augmented with increasing in $NH_3$/NO ratio at higher temperatures, whereas rather insensitive to the $NH_3$/NO ratio at lower temperatures.

• Journal of Oriental Neuropsychiatry
• /
• v.20 no.2
• /
• pp.101-110
• /
• 2009

Objectives : The purpose of this study was to investigate the effects of acupuncture on autonomic nervous system in anxiety patients and normal subjects by using SCR(Skin Conductance Response). Methods : The study group consists of 15 anxiety patients as the experimental group stimulated by verum acupuncture, 15 anxiety patients as the control group stimulated by sharm acupuncture, and 15 normal subjects stimulated by verum acupuncture. We measured GSR of experimental and control group, normal subjects during Working Memory Test and acupuncture stimulation. Results : 1. Measured value of SCR during Working Memory Test was significant different in control group, but it was not significant different in experimental group. 2. SCR value of three groups was significantly decreased during acupuncture stimulated. There was only significantly SCR value change during 0min.-5min, of first acupuncture. The section of the other groups was no significantly different. 3. STAI scores of experimental group and control group were significantly decreased. Conclusions : The study results suggest that acupuncture stimulation and sham acupuncture also effective on activity in the sympathetic nervous system and STAI scores.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.87-94
• /
• 2017

In this study, a catalyst based on $Pt/Al_2O_3$ supported on Mg was prepared by a wet impregnation method to investigate the $CH_4-SCR$ reaction characteristics of various alumina supports. Alumina supported on $Pt/Al_2O_3$ catalyst was converted to an $Al_2O_3$ composite, and when Mg was added, oxygen species of the active metal Pt were controlled due to electrophobic characteristics. Oxygen-controlled Pt used as a reducing agent inhibited the oxidation of $CH_4$ to $CO_2$. The addition of Mg also promoted the adsorption of NO species and the conversion of NO to $NO_2$ due to the NOx storage property on the catalyst surface.