• Journal of Korea Port Economic Association
• /
• v.31 no.3
• /
• pp.107-120
• /
• 2015

International logistics systems for cross-border trading aim not only to reduce costs and time, but also to maximize added value. For accuracy of shipping time, cost reduction, rapidity, and safety improvement, demand for Ro-Ro shipping as a global supply chain operating system has increased. To anticipate these demands, this study estimates the optimal demand and scale of Ro-Ro berth construction by analyzing shipping volumes between Korea and Japan. Based on Ro-Ro shipping speeds and distances between Korea and Japan, the shipping volume (container and general cargo) of Busan port is sorted into two separate zones. After analyzing the ratio of items that have great potential benefits from using Ro-Ro shipping, we estimate possible shipping volumes using Ro-Ro berth provision. The results reveal that two berths for 20,000t vessels are additionally required to accommodate the estimated volume. Results suggest the construction of an exclusive Ro-Ro berth in Busan port. This would not only accommodate the demand between Korea and Japan, but also provide a way to avoid the lean-to-one-side port policy.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.373-379
• /
• 2015

Supply units in each command are multi-tiered and each supply unit keeps a supply level independently, which can cause excess stock, leading false reports to the Logistics Command and increasing difficulties in managing user needs. This causes excess assets and the excess then causes deformation in demand. therefore, the supply support systems of our armed forces have become high-cost/low-efficiency and are insufficient to meet the needs of users in combat units. Civilian corporations and the US Department of Defense are downsizing the aforementioned multi-tiered supply systems thus revolutionizing efficient and effective logistics by adopting Supply Chain Management(SCM), and Prime Vendor policies. Prime Vendor policy is a logistics support method that allows users to directly request and receive supply items from suppliers, based on supply contracts between suppliers and central maintenance organizations like KDA. In other words, it is a system that allows for users to make orders to suppliers directly and suppliers to deliver goods to the users directly, cutting out the middle stage, thus allowing an efficient supply. This is a way forward in finance that cuts costs in net supplies and allows an efficient utilization of civilian assets. which is also known to fasten the speed of logistical support and stripping down the logistical structure. therefore, this report will explore Prime Vendor policies adopted in certain number of units for medical supplies that were taken in consideration of improvements in stock management in civilian organizations and the US Army, and aims to apply such policies for repair parts.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.6
• /
• pp.142-151
• /
• 2013

This study develops an automation system for metallic mold design that is applicable in forging non-axial symmetric parts. The metallic mold design program is used to design the metallic mold using two-dimensional axial symmetric metallic molds and to predict the stress concentration using finite element analyses. Then, the program redesigns the metallic mold using variables such as the optimal split diameter, maximum allowable inner pressure, fit tolerance, and stress distribution, which are calculated using the metallic mold design program. When the involute spur gear is forged, stress concentration occurs on the tooth root bounded at the symmetric surface. The SCM4 material is suitable for metallic molds because the stress is less than the yield strength of the insert and it acts on the tooth root regardless of the inner pressure. The metallic mold for forging non-axial symmetric parts can be designed through adjusting the magnitude of the contact pressure. The program developed in this study can be applied to metallic mold designs in involute spur gears of forging, which is an ordinary non-axial symmetric part.

• The Research Journal of the Costume Culture
• /
• v.14 no.6
• /
• pp.987-1003
• /
• 2006

Recent economic depression aggravates the difficulty in employment, and it has been expanded to a social issue. Even worse, low wage structure in the textile and fashion industry, and inferior working environment make it difficult for fashion design graduates to stably settle down in society. To tackle all these problems, the demand of a new educational model is on the rise. In responding to such economic and educational environment changes, we can actively cope with structural problems in the textile and fashion field, and a social problem of youth unemployment by vigorously using the Internet as a tool for practice. In other words, Startups are reinvigorated through hands-on education, focused on information by introducing the factor of supply chain management (SCM), which efficiently manages resources within the supply chain, and a business to customer (B2C) model, and by utilizing these for startup education.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.756-761
• /
• 2007

The construction Supply Chain Management(SCM) plays a critical role to proceed construction projects successfully. It is necessary to develop a system to support better communication among various actors and to supply construction materials in the right place on time with unstable situations on site according to the planned construction schedule for effective Supply Chain Management. Therefore, the objective of this study is to propose an automated and intelligent process that can be used to utilize ubiquitous technologies in construction supply chain management. This process consists of various equipments that can collect, store, calculate and communicate data among themselves. This study deals with a conceptual idea in order to improve process and equipment in the supply chain management process.

• Korean Journal of Materials Research
• /
• v.16 no.11
• /
• pp.681-686
• /
• 2006

Plasma nitrocarburising and plasma post oxidation were performed to improve the wear and corrosion resistance of S45C and SCM440 steel by a plasma ion nitriding system. Plasma nitrocarburizing was conducted for 3h at $570^{\circ}C$ in the nitrogen, hydrogen and methane atmosphere to produce the ${\varepsilon}-Fe_{2-3}$(N, C) phase. Plasma post oxidation was performed on the nitrocarburized samples with various oxygen/hydrogen ratio at constant temperature of $500^{\circ}C$ for 1 hour. The very thin magnetite ($Fe_3O_4$) layer $1-2{\mu}m$ in thickness on top of the $15{\sim}25{\mu}m$ ${\varepsilon}-Fe_{2-3}$(N, C) compound layer was obtained by plasma post oxidation. A salt spray test and electrochemical testing revealed that in the tested 5% NaCl solution, the corrosion characteristics of the nitrocarburized compound layer could be further improved by the application of the superficial magnetite layer. Throttle valve shafts were treated under optimum plasma processing conditions. Accelerated life time test results, using throttle body assembled with shaft treated by plasma nitrocarburising and post oxidation, showed that plasma nitrocarburizing and plasma post oxidation processes could be a viable technology in the very near future which can replace $Cr^{6+}$ plating.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.1
• /
• pp.159-166
• /
• 2010

It is noteworthy that EIS Consulting Method by ISP based on ERP Linkage Type for Large Scale Enterprise Associate Company. In this thesis, IT Strategy plan and methodology are suggested in order to solve the several problems including standardization on implementation of EIS Introduction and operation between large-small enterprise. Integration of business and information technical is made by Business management group's continuous IT concern and future information strategy. Also this paper proposes ISP Planning method (environment analysis, present analysis, IT analysis, target IT plan etc..), EIS Construction (based ERP Real data/time). In addition to, we suggest to use electron industry model and LCD/LED field in this system.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.14 no.6
• /
• pp.57-68
• /
• 2004

Recently, Radio Frequency Identification (RFID) systems stands in the spotlight of industry as a common and useful tool in manufacturing, supply chain management (SCM) and stock management. In the near future, low-cost RFID Electronic Product Code; (EPC) or smart-labels may be a practical replacement for optical barcodes on consumer items. However, manufacturing cheap and small RFID tags, and developing secure RFID authentication Protocols are problems which need to be solved. In spite of advances in semiconductor technology, computation and storage ability of the tag are so limited that it is difficult and too expensive to apply existing crypto-systems to RFID tags. Thus it is necessary to create a new protocol which would require less storage space and lower computation costs and that is secure in the RFID system's environments. In this paper, we propose a RFID authentication protocol that is secure against location tracking and spoofing attacks. Our protocol can be used as a practical solution for privacy protection because it requires less computations in database than the previous RFID authentication protocol.

• Journal of Korea Trade
• /
• v.25 no.1
• /
• pp.152-168
• /
• 2021

Purpose - This paper has an objective to suggest reasonable criteria in choosing Incoterms 2020 rules for efficient and effective logistics management in that the Incoterms rules affect not only the rights and obligations of the parties to the sales contract but also the control and management of logistics system and transaction costs in the transaction. Design/methodology - An analysis of the various factors is needed to assess the positive or negative impact on global value chain in choosing Incoterms rules from a total logistics view. This study analyzes the impact of which the content of individual incoterms rules can have on the operation of international logistics systems under the global value chain from a strategic perspective to suggest reasonable criteria for selection of Incoterms rules depending on the transaction situation. Findings - Results of this study shows that consideration of various aspects which includes the characteristics of the products, logistics capabilities, infrastructure, transaction volume, operational cost, customs regulations, tax and accounting should be reflected in choosing the appropriate Incoterms rules. Therefore, in order to minimize the total cost and improve logistics performance, it may be helpful to develop a decision support model which allows users to select appropriate Incoterms rules based on various influencing factors. Originality/value - This Study is different from previous research which has mainly focused on the rights and obligations of the parties to the transaction regarding the transfer of risks and costs under the Incoterms. In addition, this study has significance in that it provides implications for export and import companies that can be able to use Incoterms as a strategic tool to efficiently manage the global value chain and improve supply chain performance.

• Korea Trade Review
• /
• v.46 no.5
• /
• pp.65-81
• /
• 2021

The technological development in the era of the 4th industrial revolution is changing the paradigm of various industries. Various technologies such as big data, cloud, artificial intelligence, virtual reality, and the Internet of Things are used, creating synergy effects with existing industries, creating radical development and value creation. Among them, the logistics sector has been greatly influenced by quantitative data from the past and has been continuously accumulating and managing data, so it is highly likely to be linked with big data analysis and has a high utilization effect. The modern advanced technology has developed together with the data mining technology to discover hidden patterns and new correlations in such big data, and through this, meaningful results are being derived. Therefore, data mining occupies an important part in big data analysis, and this study tried to analyze data mining techniques that can contribute to the logistics field and common logistics using these data mining technologies. Therefore, by using the AHP technique, it was attempted to derive priorities for each type of efficient data mining for logisticalization, and R program and R Studio were used as tools to analyze this. Criteria of AHP method set association analysis, cluster analysis, decision tree method, artificial neural network method, web mining, and opinion mining. For the alternatives, common transport and delivery, common logistics center, common logistics information system, and common logistics partnership were set as factors.