• 한국전자통신학회논문지
• /
• 제15권6호
• /
• pp.1145-1150
• /
• 2020

다보스 포럼 이후 최근 4차 산업혁명은 전 세계의 국가들의 관심을 갖는 분야가 되고 있다. 4차 산업혁명의 기술 중 유비쿼터스 컴퓨팅 환경은 각종 디바이스, 네트워크 및 소프트웨어 기술의 융합 환경을 필요로 하며, IoT 기술 분야 중 사물을 식별하는 RFID 기술은 산업 전 분야에 응용되고 있으며 경쟁력을 갖추고 있다. RFID 기술을 응용한 시스템은 다양한 산업분야에서 이용되고 있고, 특히! 유통, 물류 분야에서 정확한 재고관리와 SCM 관리에 매우 효율적으로 사용되고 있다. RFID 시스템을 클라우드 기반의 환경으로 구축했을 경우 효과적인 물류관리 시스템과 경제성을 고려하여 유통관리에 신뢰성을 확보할 수 있을 것이다. 본 연구는 클라우드 컴퓨팅 환경에서 RFID 시스템에 관한 연구로 응용 서버를 운영하거나 유지 보수하는 비용을 줄여 경제성과 신뢰성을 향상 시킬 수 있도록 연구한다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2011년도 추계학술대회
• /
• pp.162-163
• /
• 2011

This paper presents the system dynamics methodology for modeling and control the production/inventory system. Under system dynamics point of view, we can apply some production/inventory policies as if we use the control laws for dynamics systems, then the behavior of system is analyzed and evaluated to improve the performance of production/inventory system. We also utilize the hybrid modeling method for the dynamic of production system with the combination of Matlab/Simulink and Matlab/Sateflow. Finally, the numerical simulation results are carried out in Matlab/Simulink environment and compare with the results from other works. It is shown that our approach can obtain some good performances (such as operational cost, stability of inventory, customer service level).

• 대한안전경영과학회지
• /
• 제6권3호
• /
• pp.187-196
• /
• 2004

By successful establishment of Supply Chain Management System they should make the supply chains speedy and combine production information system with the outcome system and thus they reinforce the competition of the production system of local enterprises in accordance with the rapid decision making. Supply chain coordination improves if all supplier of chain take actions that together increase total supply chain profits. To design of Modularity by the grouping supplier, the proposed method is to develop the most appropriate production system models through the reflection of JIT system in the Supply Chain Management which is necessity of the times and its importance. The objects of this study is to develop the most appropriate production system Model and optimal profit model in the process line and to provide the enterprises with the models which are based on the Supply Chain Management.

• 한국환경과학회지
• /
• 제18권8호
• /
• pp.867-876
• /
• 2009

Although renewable power is regarded a way to active response to climate change, the stability of whole power system could be a serious problem in the future due to its uncertainties such as indispatchableness and intermittency. From this perspective, the peak time impact of stochastic wind power generation is estimated using simulation method up to year 2030 based on the 3rd master plan for the promotion of new and renewable energy on peak time. Result shows that the highest probability of wind power impact on peak time power supply could be up to 4.41% in 2030. The impact of wind power generation on overall power mix is also analyzed up to 2030 using SCM model. The impact seems smaller than expectation, however, the estimated investment cost to make up such lack of power generation in terms of LNG power generation facilities is shown to be a significant burden to existing power companies.

• Tribology and Lubricants
• /
• 제26권6호
• /
• pp.311-316
• /
• 2010

Surface texturing of micro dimple or pore-shaped pattern was prepared using a fiber laser system. Surface texturing was designed to have a square pattern with a particular pitch distance for each corresponding density of 5, 10, 20, and 30%. Thermal damages such as bulges and burrs formed during laser irradiation were observed around the dimples. Thermal damages were later removed by lapping using alumina particles of $0.3{\mu}m$ in diameter. Oscillating friction tests were performed against heat-treated high speed steels under lubricated condition. The lubricant used was SAE 5W-30 automotive engine oil. Normal contact pressure and oscillating frequency was 0.28 MPa and 20 Hz, respectively. The tests were continued for 20 minutes, and friction plots were recorded for examination. Results revealed that the coefficient of friction was lowered regardless of texturing density. Moreover, the lowest coefficient of friction was obtained for 10% density texturing. It is attributed to increased lubricity due to the introduction of surface texturing. In addition, it is concluded that the optimum texturing density and pattern must be found for the best lubricity and low friction.

• Journal of Forest and Environmental Science
• /
• 제32권2호
• /
• pp.173-181
• /
• 2016

This study designed a model of the efficient production schemes and raw materials transportation optimization of current South Korean's simple and monolithic distribution system of wood to build a SCM (supply chain management) as a basic level to establish a distribution of future by pellet production of raw materials costs and reduce transport costs, and specifically to forest of pallet to contribute to revitalizing the market. The result of each transportation costs after building the best transportation network from raw material supply area to demand area applying transport law was 964,600 thousands Won from 6 supply areas to 7 demand areas. And the result of each model's analysis to get the pellet's efficient production through production cost reduction showed that it reduced from 325,701 Won/t to 240,106 Won/t, results of existing efficient pellet for the production model 8,233 tons over 20,000 tons annual production capacity from the size of the expanded production capacity when the expansion. However, when the production size expanded to 50,000 Tons of the production, the effect was very small even though production cost decreased.

• 한국산학기술학회논문지
• /
• 제14권11호
• /
• pp.5366-5370
• /
• 2013

본 연구에서는 볼트의 원활한 성형이 이루어지도록 볼트의 성형 공정 중 2단계에서 시행하던 압출공정을 4단계로 옮기고 2단계와 3단계에서는 볼트 머리부 성형만 이루어지도록 공정을 조정하여 해석하였다. 그 결과 약간의 수정으로 원활한 성형이 이루어 졌으며 접촉압력은 수정 전보다 1단계에서는 감소하고 2단계에서는 증가하였으며, 최대유효응력, 유효변형율, 성형력은 수정전보다 1, 2단계에서 모두 증가함을 알 수 있었다.

• 비파괴검사학회지
• /
• 제29권3호
• /
• pp.224-229
• /
• 2009

An experimental study was conducted to investigate the effects of turtle neck syndrome, so called, on muscular fatigue and muscle activity. Six subjects (males) participated and performed the prolonged casual computer work in the study. EMG signals from six muscles of the dominant neck-back region were acquired and recorded for 10 seconds at the beginning and the end of three hours computer work. EMG was recorded from six muscles by using a computerized data recording and analysis system. Power spectrum function of EMG was calculated off-line by means of a signal processing software package. Power spectrum functions were smoothed with a moving average filter of 21 points and normalized with respect to the maximal value achieved during the trials. Muscle activity and median frequencies of Sternocleidomastoid(SCM) in turtle neck posture was approximately 51%, which were less than those in normal neck posture. SCM also showed the biggest decrease in median frequency. Results will provide the insight into the neck-back injury mechanism of turtle neck patients. Furthermore, they will be helpful in developing rehabilitation programs for restoring patients' neck-back functions.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2001년도 학술대회지
• /
• pp.175-183
• /
• 2001

오늘날 국내 기업들의 관심은 업종을 가리지 않고 정보기술(IT)로 집중하여 고객관계관리(CRM), SCM, ERP등과 같은 다양한 기법들을 도입하지 않으면 경쟁에서 도태될 것 같은 분위기로 전환되고 있으며, 이러한 사항은 건설산업에서도 나타나고 있다. 그러나 국내 건설기업들의 홈페이지에는 단순히 자사의 홍보나 시스템 활용부문에 한정된 구성을 취하고 있으며, 고객들의 참여유도 역시 낮은 수준을 유지하고 있는 실정으로 조사되었다. 이에 본 연구는 타 산업의 구축사례와 건설관련자들의 설문조사를 분석하여 고객관계관리(CRM) 개념을 기반으로 한 건설기업들의 웹사이트 활성화를 위한 기초자료를 제시한다.

• 한국광학회지
• /
• 제16권3호
• /
• pp.235-238
• /
• 2005

생산성 향상을 위하여 정렬된 마이크로칼럼을 이용하여 멀티-전자빔 리소그라피 장치를 개발하였다. 마이크로칼럼은 매우 작은 크기를 가지고 있어 병렬구조로 정렬하여 작동시킬 수 있다. Single Column Module(SCM) 구조의 멀티 전자빔 리소그라피 시스템과 전자칼럼을 제작하여 250 eV에서 300 eV 에너지 범위에서의 저에너지 마이크로칼럼 리소그라피를 성공적으로 수행하였다. 전자방출원에서 방출되는 전자빔의 총 전류가 $0.5\;{\mu}A$일 때, 샘플에서의 전류는 >1 nA으로 측정되었으며 리소그라피 패텅닝에서 사용된 working distance은 $\~1\;mm$였다.