• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.6 s.312
• /
• pp.48-60
• /
• 2006

This paper presents three PWM modulators using CMOS OTAs. They consist of a ramp integrator and current-tunable Schmitt triggers. Prototype circuits built using discrete components exhibited that their duty cycles are linearly controllable. The proposed modulators can be easily fabricated in a monolithic IC, because they have a simple structure.

• Journal of the Korean Mathematical Society
• /
• v.55 no.6
• /
• pp.1389-1421
• /
• 2018

In this paper, we introduce the notion of C-Gorenstein weak injective modules with respect to a semidualizing bimodule $_SC_R$, where R and S are arbitrary associative rings. We show that an iteration of the procedure used to define $G_C$-weak injective modules yields exactly the $G_C$-weak injective modules, and then give the Foxby equivalence in this setting analogous to that of C-Gorenstein injective modules over commutative Noetherian rings. Finally, some applications are given, including weak co-Auslander-Buchweitz context, model structure and dual pair induced by $G_C$-weak injective modules.

• Natural Product Sciences
• /
• v.21 no.4
• /
• pp.248-250
• /
• 2015

A new ${\alpha}-pyrone$ derivative, violapyrone J (1), and along with the two known violapyrones B (2) and C (3) were isolated from the fermentation broth of a marine actinomycete Streptomyces sp. SC0718. The structure of violapyrone J (1) was elucidated from 1D and 2D NMR spectroscopic analyses.

• Journal of Communications and Networks
• /
• v.11 no.5
• /
• pp.480-488
• /
• 2009

Cooperative transmission is an effective solution to improve the performance of wireless communications over fading channels without the need for physical co-located antenna arrays. In this paper, selection combining is used at the destination instead of maximal ratio combing to optimize the structure of destination and to reduce power consumption in selective decode-and-forward relaying networks. For an arbitrary number of relays, an exact and closed-form expression of the bit error rate (BER) is derived for M-PAM, M-QAM, and M-PSK, respectively, in both independent identically distributed and independent but not identically distributed Rayleigh fading channels. A variety of simulations are performed and show that they match exactly with analytic ones. In addition, our results show that the optimum number of relays depend not only on channel conditions (operating SNRs) but also on modulation schemes which to be used.

• Korean Journal of Optics and Photonics
• /
• v.13 no.6
• /
• pp.554-558
• /
• 2002

A new laser material, Nd:LSB $(Nd${3}:LaSc_3(BO_3)_4$, lanthanum scandium borate), of microchip type was grown by the Czochralski pulling method, and tested for optical and lasing properties. Nd:LSB, able to be highly doped with $Nd^{3+}$ ions while maintaining good optical, chemical, mechanical properties, was compared to another Nd-type laser material. The absorption and fluorescence spectra, and fluorescence lifetime were measured, and the crystal structure was analyzed. The lasing characteristics were investigated by using Ti:sapphire laser as a pumping light source.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.412-419
• /
• 2002

This paper presents a parametric study on the behavior of integral abutment PSC beam bridge. An integral abutment bridge is a simple span or multiple span continuous deck type bridge having the deck integral with the abutment wall. The rational structural model and design load combinations accounting for each construction stage are proposed. It can be used for defining the effect of earth pressure and temperature change in the design process including for determining maximum flexural responses. The bending moment at each response location due to the design load combination is investigated according to the change of flexural rigidity of piles and abutment height. The flexural responses of proposed model are computed for the cases of applying the Rankine passive earth pressure and the earth pressure based on the soil-structure interaction respectively, and the results are discussed.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.5
• /
• pp.299-307
• /
• 2003

The local structure of CMAC neural networks (NN) results in better and faster controllers for nonlinear dynamical systems. In this paper, we propose a CMAC NN-based disturbance observer and its corresponding controller for a flexible joint robot. The CMAC NN-based disturbance observer compensates for the parametric uncertainties and the external disturbances throughout the entire mechanical system. Finally, a simulation result is given to demonstrate the effectiveness of proposed design method's robust tracking performance.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.4 s.304
• /
• pp.19-24
• /
• 2005

In this paper, some algorithms for robust stabilization of linerar time - invariant single - input - multi output(SIMO) systems subject to parameter perturbatations are presented. .The range of structure perturbation was obtained by using the gradient optimization algorithm. These algorithms iteratively enlarge the stability hypersphere in plant parameter space and can be used to design a robust controller to stabilize a plant subject to givien range of parameter ecxursions.

• Journal of the Korean Ceramic Society
• /
• v.36 no.8
• /
• pp.863-870
• /
• 1999

SOI(silicon on insulafor) was fabricated through the direct bonding using (100) Si wafer and 4$^{\circ}$off (100) Si wafer to investigate the stacking faults in silicon at the Si/SiO2 oxidized and bonded interface. The treatment time of wafer surface using MSC-1 solution was varied in order to observe the effect of cleaning on bonding characteristics. As the MSC-1 treating time increased surface hydrophilicity was saturated and surface microroughness increased. A comparison of surface hydrophilicity and microroughness with MSC-1 treating time indicates that optimum surface modified condition for time was immersed in MSC-1 for 2 min. The SOI structure directly bonded using (100) Si wafer and 4$^{\circ}$off (100) Si wafer at the room temperature were annealed at 110$0^{\circ}C$ for 30 min. Then the stacking faults at the bonding and oxidation interface were examined after the debonding. The results show that there were anomalies in the gettering of the stacking faults at the bonded region.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.9
• /
• pp.976-981
• /
• 1997

The magnetic susceptibilities of molybdenum ions with 4d1 electronic configuration in the octahedral crystal field were calculated on the basis of ligand field theory. The experimental magnetic susceptibilities for molybdenum ions, which are stabilized at the octahedral site in the perovskite lattice of Ba2ScMoⅤO6 and Sr2YMoⅤO6, were compared with the theoretical ones. We have tried to fit their temperature dependence of magnetic susceptibility with ligand field parameters, spin-orbit coupling constant ζSO, and orbital reduction parameter κ according to intermediate field coupling and strong field theory. Strong field coupling theory could not explain experimental curves without unrealistically large axial ligand field, since it ignores the mixing up between different state via spin-orbit interaction and ligand field. On the other hand, the intermediate field coupling theory could successfully reproduce experimental data in octahedral and trigonal ligand field. The fitting result demonstrates not only the fact that spin-orbit interaction is primarily responsible for the variation of magnetic behavior but also the fact that effective orbital overlap, enhanced by cubic crystal structure, reduces significantly orbital angular momentum as indicated by κ parameter.