• Journal of the Korea Society of Computer and Information
• /
• v.22 no.5
• /
• pp.1-9
• /
• 2017

Recently, flash memory has been in a great demand from embedded system sectors for storage devices. However, program/erase (P/E) cycles per block are limited on flash memory. For the limited number of P/E cycles, many wear leveling techniques are studied. They prolonged the life time of flash memory using information tables. As one of the techniques, block erase table (BET) method using a bit array table was studied for embedded devices. However, it has a disadvantage in that performance of wear leveling is sharply low, when the consumption of memory is reduced. To solve this problem, we propose a novel wear leveling technique using Sampling-based Block Erase Table (SBET). SBET relates one bit of the bit array table to each block by using exclusive OR operation with round robin function. Accordingly, SBET enhances accuracy of cold block information and can prevent to decrease the performance of wear leveling. In our experiment, SBET prolongs life time of flash memory by up to 88%, compared with previous techniques which use a bit array table.

• Clinical and Experimental Reproductive Medicine
• /
• v.38 no.1
• /
• pp.53-60
• /
• 2011

Objective: This study was carried out to compare the clinical outcome of elective single cleavage-embryo transfer (eSCET) to that of elective single blastocyst-embryo transfer (eSBET) in human IVF-ET. Methods: This study was a retrospective study which analyzed for 614 women who visited the Daegu Maria Clinic from August 2008 to December 2009. All were under 37 years old and had more than 8 mm of endometrial thickness on the day of hCG administration and at least one good quality embryo on day 3. The eSCETs were performed on day 3 (n=450) and the eSBETs were conducted on day 5 (n=164). Results: The numbers of retrieved oocytes, fertilized oocytes, and day 3 good quality embryos were significantly lower in the eSCET group (12.1${\pm}$6.0, 8.2${\pm}$4.6, and 4.2${\pm}$3.1, respectively) compared to the eSBET group (16.7${\pm}$7.2, 12.1${\pm}$5.0, and 8.5${\pm}$4.5, respectively; p<0.001). However, the clinical pregnancy, implantation, on-going pregnancy, and live birth rates of the eSCET group (46.7, 46.9, 40.0, and 36.7%, respectively) were not statistically different from those of the eSBET group (51.2, 51.8, 45.1, and 43.9%, respectively; p=0.318, 0.278, 0.254, and 0.103, respectively). Conclusion: These results suggested that elective single embryo transfer should be performed regardless of the developmental stage to women less than 37 years old who had more than 8 mm of endometrial thickness on the hCG administration day and at least one good quality embryo on day 3 in order to reduce the twin pregnancy rate without reducing the whole pregnancy rate.

• Proceedings of the KSEEG Conference
• /
• 2000.04a
• /
• pp.59-60
• /
• 2000

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.05a
• /
• pp.83-83
• /
• 2000

• Proceedings of the KSEEG Conference
• /
• 2005.04a
• /
• pp.60-63
• /
• 2005

• Korean Journal of Environmental Agriculture
• /
• v.34 no.3
• /
• pp.161-167
• /
• 2015

BACKGROUND: For the heavy metal cotamination sites, it is very important to estimate the human bioavailability quotients for heavy metals in paddy soils released from mine tailings, which is a major source of contamination in Korea, and to assess the human health risks of heavy metals. METHODS AND RESULTS: This experiment was carried out to investigate the human bioavailability quotient of the heavy metals in paddy soils below part of the closed metalliferous mine. For estimating the human bioavailability quotients for heavy metals, 30 paddy soils below part of the closed mine were collected, and analyzed for Cd, Cu, Pb, Zn, and As using simple bioavailability extraction test(SBET). The quantities of Cd, Cu, Pb, Zn and As extracted from paddy soils below part of the mine by using the SBET analysis were 28.1, 17.3, 34.1, 14.6 and 2.3% respectively. Specially, the maximum values of Cd, Pb and Zn were 73.3, 81.5 and 58.1% of human bioavailability quotient, respectively, and varied considerably among the sampling sites. The human bioavailability quotient of Cd, Cu, Pb and Zn in soils near the closed mine showed significant positive correlation among soil pH value, O.M. and Ex. Ca. contents, while it correlated negatively between soil Ex. K and Ex. Mg contents in paddy soils. Also, its of Cd, Cu, Pb and Zn in paddy soils showed significant positive correlation with 0.1M HCl extractable and total contents, while in soils, it correlated negatively with As content in soil near the closed mine. CONCLUSION: The results of the simple bioavailability extraction test (SBET) indicate that regular ingestion of soils by the local population could be closed a potential health threat due to long-term heavy metals exposure in these mine areas.

• Economic and Environmental Geology
• /
• v.38 no.2 s.171
• /
• pp.135-142
• /
• 2005

In order to investigate the contamination level and seasonal variation of heavy metals and evaluate the bioavailability of toxic elements, environmental geochemical survey was undertaken at the Dogok Au-Ag-Cu mine area. The main pollution sources in the area were suggested as tailings, mine waste materials and mine water. Elevated levels of $140{\cal}mg/{\cal}kg{\;}As,{\;}107{\cal}mg/{\cal}kg{\;}Cd,{\;} 3017{\cal}mg/{\cal}kg{\;}Cu,{\;}12926{\cal}mg/{\cal}kg{\;}Pb,{\;}9094{\cal}mg/{\cal}kg$ Zn(before rainy season) were found in mine tailings. Concentrations of heavy metals in farmland soils exceeded normal level in nature soil (Bowen, 1979). The highest level of heavy metals was found in water samples near the mine tailing dumps regarded as a main pollution source of toxic elements in the area. These concentrations decreased to downstream due to the effect of dilution. From the results of sequential extraction analyses for tailings and soils, non-residual forms of heavy metals were found, which indicate the contamination to be progressing by continuing weathering and oxidation. Cadmium and Zn would be of the highest mobility in all samples. The bioavailability of Cd, Cu, Zn and As using SBET analysis from paddy soils was $53.3{\%},{\;}46.5{\%},{\;}41.0{\%}$ and $37.0\%$, respectively. The farmland soil sample(S3) showed the highest total concentration and bioavailability of heavy metals.

• Economic and Environmental Geology
• /
• v.33 no.4
• /
• pp.273-282
• /
• 2000

In order to investigate the extent and degree of arsenic and heavy metal contamination and the bioavailability of toxic elements around the abandoned mine in Korea, an environmental geochemical survey was undertaken in the Daduk mine. After appropriate preparation, tailings, soil, stream sediment, crop plant and fingernail samples were analysed for As, Cd, Cu, Pb and Zn by ICP-AES and ICP-MS. Elevated levels of 8,782 mg/kg As, 8.3 mg/kg Cd, 489 mg/kg Cu, 3,638 mg/kg Pb and 919 mg/kg Zn were found in tailings from the Daduk mine. These significant concentrations can impact on soils and sediments around the tailing ponds. Mean concentrations of As, Cd, Pb, Cu and Zn in soils are significantly higher than those in world average soil, especially for As and Pb. Element concentrations in sediments decrease with distance from the tailing ponds due to a dilution effect by the mixing of uncontaminated sediments. Arsenic and Cd are elevated in rice grains and stalks, and Cu and Zn concentrations in chinese cabbage, sesame and bean leaves are higher than the upper limit values for normal plant. Arsenic concentration in fingernails of farmers are higher than the normal level with a maximum value of 1.5 mg/kg. The post-ingestion bioavailability of toxic heavy metals in some paddy and farmland soils has been also investigated using the SBET (simple bioavailability extract test) method. The method utilises synthetic leaching fluids closelyanalogous to those of the human stomach. The quantities of As, Cd, Cu, Pb and Zn extracted from paddy soils after 1 hour indicated 15.9, 65.4, 46.2, 39.4 and 29.4% bioavailability, respectively and for farmland soils, 12.4, 26.0, 31.2, 29.3 and 19.4% bioavailability, respectively. The results of the SBET indicate that regular ingestion of soils by the local population could pose a potential health threat due to long-term toxic element exposure.

• Economic and Environmental Geology
• /
• v.37 no.1
• /
• pp.73-86
• /
• 2004

In order to estimate the post-ingestion bioavailability of heavy metals and to assess the risk of adverse health effects on human exposure to toxic heavy metals, environmental geochemical surveys were undertaken around the Dogok Au-Ag-Cu and the Hwacheon Au-Ag-Pb-Zn mine sites. Human risk assessment of toxic heavy metals was performed with the results of the SBET(simple bioavailability extraction test) analysis for soil and chemical analytical data for crop plant and water. Arsenic and other heavy metals were highly elevated in tailings from the Dogok(218 As mg/kg, 90.2 Cd mg/kg, 3,053 Cu mg/kg, 9,473 Pb mg/kg, 14,500 Zn mg/kg) and the Hwacheon(72 As mg/kg, 12.4 Cd mg/kg. 578 Pb mg/kg, 1,304 Zn mg/kg) mines. These significant concentrations can impact on soils and waters around the tailing dumps. The quantities of As, Cd and Zn extracted from paddy soils in the Hwacheon mine using the SBET analysis were 55.4%, 20.8% and 26.4% bioavailability, respectively, and for farmland soils in the Dogok mine, 40.8%, 37.6% and 33.0% bioavailability, respectively. From the results of human risk assessment, HI(Hazard Index) value exceeded 1.0 for As in the Hwacheon mine and for Cd in the Dogok mine. Thus, toxic risks for As and Cd exist via exposure(ingestion) of contaminated soil, water and rice grain in these mine sites. The cancer risk for As by the consumption of rice and groundwater in the Hwacheon mine area was 8E-4 and 1E-4, respectively. This risk level exceeds the acceptable risk(1 in 100,000) for regulatory purpose. Therefore, regular ingestion of locally grown rice and ground-water by the local population can pose a potential health threat due to long-term arsenic exposure.

• Journal of Environmental Science International
• /
• v.19 no.6
• /
• pp.681-687
• /
• 2010

Mesoporous silica was prepared from hydrothermal synthesis using gel mixture of tetraethylorthosilcate (TEOS) as silica source and cetyltrimethylammonium bromide (CTMABr) as a surfactant. In the optimum synthesis cause, molar ratio of template and silica changed. The surface and structure properties of mesoporous silica were determined by XRD, SEM, TEM and BET. Also, surface potential of mesoporous silica was measured using zeta potential. $N_2$ adsorption isotherm characteristics, including the specific surface area ($S_{BET}$), total pore volume $V_T$), and average pore diameter ($D_{BJH}$), were determined by BET. As a result, SBET of $100m^2/g{\sim}1500m^2/g$ was determined from the $N_2$ adsorption isotherm. Also, the average pore diameter was 2 nm∼4 nm. Mesoporous silica's surface potential of minus charge was determined from zeta potential.