• Proceedings of the Korea Contents Association Conference
• /
• 2005.05a
• /
• pp.151-155
• /
• 2005

Telemedicine uses common technologies that provide a conduit for information exchange between physicians nurses and patients. In addition to patient records, medical professionals can obtain vital signs and other reference data through telemedicine applications. also, recent advancement in RF technology and wireless communications has enabled the development of Ubiquitous networks. Mobile telemedicine involves more than just communicating via mobile phone of PDA that sends and receives medical data on Portable Internet. this paper describes the design of a mobile telemedicine PDA prototype based on Embedded Linux that can be used to monitor the medical information using a single board computer(SBC). This system would be very useful for patients with chronic illness, especially in an emergent environment, and for containing medical cost in the aged society.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.986-989
• /
• 1988

The new controller which conststs of IBM-PC/AT, SBC, servo module and motor driver has been developed for KIMMBOT II robot. The servo module which controls two axes at the same time also has beendeveloped. This module inputs relative number of pulse and feedrate via multbus, after then outputs analog command voltage with reference to feedback pulses from the encoder of a motor. This system has a great flexibility. The reduction of parts gives more reliability.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1903-1904
• /
• 2006

This technical report provide practical waterwork management system by using CDMA telecommunication method. Local water supply unit and tude-well unit which is placed in the mountainous area could be controlled remotely by MMI monitoring system. Developed method of waterwork managing system is a newly application area of CDMA technology which include web-based control units.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.561-567
• /
• 2007

This paper deals with the numerical model of a bracing-friction damper system and its deployment using the optimal slip load distribution for the seismic retrofitting of a damaged building. The Slotted Bolted Connection (SBC) type friction damper system was tested to investigate its energy dissipation characteristic. Test results coincided with the numerical ones using the conventional model of a bracing-friction damper system. The placement of this device was numerically explored to apply it to the assumed damaged-building and to evaluate its efficiency. It was found by distributing the slip load that minimizes the given performance indicies based on structural response. Numerical results for the damaged building retrofitted with this slip load distribution showed that the seismic design of the bracing-friction damper system under consideration is effective for the structural response reduction.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.418-420
• /
• 2007

When the magnetic levitation system(MAGLEV) initially rise, The MAGLEV has a weak point that is very large variation of the electric current. In this paper, The author applied the multi-loop-control to stably control the magnetic levitation system(MAGLEV). The gains of the control algorithm were selected based on pole locations formulated from a prototype Bessel transfer function model. The design incorporate tradeoffs in DC-to-DC converter hard-ware para-meters and pole locations. In order to confirm the superiority of the proposed pole selection and controller, MATLAB simulation and experiment results are presented.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.3
• /
• pp.1380-1386
• /
• 2011

The request of interrupt accompanies a context switching. If the interrupt is frequently requested, this overhead of context switching can reduce seriously the performance of embedded systems. In order to reduce processing overhead due to frequently requested communication interrupts at Asynchronous Serial Communication, this paper introduces the method of Expanded Asynchronous Serial Communication with the Interrupt Coalescence(IC) that accumulates a fixed number of interrupts and processes them in one time. we implement the existing Asynchronous Serial Communication that requests communication interrupts by one byte at an LN2440SBC embedded board with a uC/OS-II and compare interrupt processing time for the performance evaluation about proposed method. As a result, the communication interrupt processing time of proposed method appears in case of low speed(9,600 bps), the decline of an average 25.18% at transmission, the decline of an average 41.47% at reception. and in case of hight speed(115,200 bps), the decline of an average 16.67% at transmission, the decline of an average 25.61% at reception.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.4
• /
• pp.101-110
• /
• 2004

Flight and Qualification Models of Single Board Computer (SBC), called On-Board Computer (OBC), for HAUSAT-l picosatellite, which is scheduled to launch on September, 2004 by Russian "Dnepr" launch vehicle, have been developed. The OBC of HAUSAT-1 has been designed with some improved features compared to other picosatellites. A multifunctional controller and up-to-date SPI (Serial Peripheral Interface) and 1-Wire interface are implemented to simplify the harness routing and to minimize the mass and size of OBC. The improved fault-tolerant architecture design methodology is incorporated in the HAUSAT-1 OBC to protect against space radiation environment. The functions of the OBC were fully tested and verified by the Electrical Test Bed (ETB) model. This paper is also addressing the environmental test results, such as random vibration and thermal vacuum tests.

• Korean Journal of Optics and Photonics
• /
• v.33 no.1
• /
• pp.22-27
• /
• 2022

We fabricate a polarization-independent dielectric multilayer thin-film diffraction grating for a spectral-beam-combining (SBC) system with a simple grating structure and low aspect ratio. Due to the refractive index and thickness error of the manufactured thin films, the diffraction efficiency of the fabricated diffraction grating was lower than that of the design. The causes of the errors were analyzed, and it was confirmed through simulation that diffraction efficiency could be compensated through an additional coating on the manufactured diffraction grating. As a result of sputtering an additional Ta₂O₅ layer on a fabricated diffraction grating, the diffraction efficiency was corrected and a maximum 91.7% of polarization-independent diffraction efficiency was obtained.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.421-423
• /
• 2007

In this paper, The authors apply a state feedback control using an optimal control theory to improve the stability of the control and the dynamic response of the DC-DC converter system with a number of different loads. To execute a this state feedback control, The authors present the pole placement technique using Linear Quadratic Regulator(LQR) to optimally control the system. An integrator can also be included in the open-loop path in order to minimize the steady-state error of the output voltage. To confirm the superiority of the controller, The simulation results are presented.

• Journal of Digital Contents Society
• /
• v.10 no.4
• /
• pp.493-499
• /
• 2009

Three methods frequently used for Hangul display in computer systems are Standard Johab Code in which each of Hangul consonants and vowels is given a 5-bit code and each syllable created by combining them forms a 2-byte code, Standard Wansung Code in which each of all the syllables generally used for Hangul presentation forms a 2-byte code, and Unicode in which each syllable in most of the world's language systems is given a unique code so that it allows computers to consistently represent and manipulate them in a unified manner. An embedded system in general has a lower processing power and a limited amount of storage space, compared to a personal compute(PC) system. According to its usage, however, the former may have a processing power equal to that of the latter. Hence, when Hangul display needs to be adopted, an embedded system must choose a display method suitable for its own resource environment. This paper introduces a TFT LCD initialization method and pixel display functions of an LN2440SBC embedded board on which an LP35, a 3.5" TFT LCD kit, is attached. Using the initialization and pixel display functions, in addition, we compare three aforementioned Hangul display methods, in terms of their processing speeds and amounts of memory space required. According to experiments, Standard Johab Code requires less amount of memory space but more processing time than Standard Wansung Code, and Unicode requires the largest amount of memory space but the least processing time.